Back
[00:01:34] <jthornton> I need to CNC the surface grinder once it is back together
[00:02:33] <andypugh> There probably aren't many of those.
[00:02:47] <andypugh> Most have at least 2 aut-axes
[00:02:53] <andypugh> (auto-axes)
[00:03:20] <andypugh> Bonus marks for web-cam based auto-stroke.
[00:03:46] <jthornton> yea, I don't think I want to go that far just have the X and Y be automagic
[00:04:02] <andypugh> They aren't already?
[00:04:19] <jthornton> totally hand operated
[00:04:35] <andypugh> How strange
[00:04:47] <jthornton> I figure a couple of steppers would do the trick
[00:05:13] <andypugh> I would err towards step-servoing the X
[00:05:56] <jthornton> it has a belt reduction now and the handle is pretty easy to move
[00:06:37] <andypugh> (Actually, perhaps a VFD and AC motor, I have worked with at least one that just plug-reversed a 3-phase motor with a cam switch)
[00:09:17] <jthornton> maybe do something with my ardunio, G203v and a nema 23 stepper... for X to see
[00:09:26] * jthornton goes back to the kitchen
[00:10:17] <roh> should be harder mechanically than electric/electronic nowadays
[00:10:40] <roh> btw.. we also got chairs
http://hackerspaces.org/wiki/Raumfahrtagentur
[00:14:06] -!- logger[mah] has quit [Remote host closed the connection]
[00:14:13] -!- logger[mah] [logger[mah]!~loggermah@mail.mah.priv.at] has joined #linuxcnc
[00:14:45] -!- pjm has quit [Read error: Connection reset by peer]
[00:15:01] -!- pjm [pjm!~pjm@uhfsatcom.plus.com] has joined #linuxcnc
[00:18:47] -!- asdfasd has quit [Ping timeout: 246 seconds]
[00:26:22] -!- kwallace [kwallace!~kwallace@tmb-233.sonnet.com] has parted #linuxcnc
[00:28:39] -!- kwallace [kwallace!~kwallace@63.83.74.233] has joined #linuxcnc
[00:42:49] -!- kmiyashiro has quit [Quit: kmiyashiro]
[00:47:15] <andypugh> I really ought to get in touch with my local Hackerspace. Apart from anything else they have a Stratasys machine
[01:08:06] <andypugh> seb_kuzminsky: I just noticed that hal/drivers/mesa-hostmot2/bitfile.h includes <linux/firmware.h> and hostmot2/bitfile.c includes <linux/firmware.h> _and_ bitfile.h. Does that make sense?
[01:08:44] <andypugh> Also, we have two very different bitfile.h and bitfile.c pairs, one in hostmot2 and one in hal/utils.
[01:09:39] <andypugh> I know just enough to know that I don't know if that makes sense.
[01:11:19] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[01:11:56] -!- ve7it has quit [Remote host closed the connection]
[01:12:12] -!- Thetawaves [Thetawaves!~Thetawave@7-139-42-72.gci.net] has joined #linuxcnc
[01:18:48] -!- Tecan [Tecan!~fasdf@ip-216-234-182-80.wildroseinternet.ca] has joined #linuxcnc
[01:18:48] -!- Tecan has quit [Changing host]
[01:18:48] -!- Tecan [Tecan!~fasdf@unaffiliated/unit41] has joined #linuxcnc
[01:18:49] -!- rob_h has quit [Ping timeout: 252 seconds]
[01:23:03] <roh> andypugh: wow.. how could they afford something nice like that (and the material supply pricing) ?
[01:23:27] <andypugh> I don't know.
[01:24:33] -!- ybon has quit [Quit: WeeChat 0.3.8]
[01:24:46] <andypugh> Hmm, 1c free delivery from China? How does that work?
http://www.ebay.co.uk/itm/Free-500pcs-Black-Snap-Lock-Pin-Security-Loop-Plastic-Tag-Fastener-5-130mm-C63-/110977720593?pt=LH_DefaultDomain_0&hash=item19d6c9a111
[01:26:02] <andypugh> Ah, I know, they already bid their reserve themselves.
[01:26:19] <Tom_itx> andypugh
[01:26:27] <Tom_itx> http://www.cnczone.com/forums/attachment.php?attachmentid=51626&d=1201239292
[01:26:36] <Tom_itx> how would you drive such a beast?
[01:26:51] <andypugh> With the right drive.
[01:26:55] <Tom_itx> heh
[01:27:09] <andypugh> 5-phase steppers are apparently quite good.
[01:27:14] <Tom_itx> most bldc are 3 phase though
[01:27:31] <roh> well.. its just one half bridge per pin.. so whats the worries?
[01:27:33] <Tom_itx> have you seen any drivers for them?
[01:27:57] <andypugh> Yes
[01:28:57] <andypugh> (many on eBay)
[01:40:33] -!- andypugh has quit [Quit: andypugh]
[01:43:09] -!- skunkworks has quit [Read error: Connection reset by peer]
[01:47:16] -!- mhaberler has quit [Quit: mhaberler]
[01:49:59] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc
[01:51:45] -!- skunkworks_ has quit [Remote host closed the connection]
[02:17:05] -!- cmorley1 [cmorley1!~chris@S010600c09fc019c2.no.shawcable.net] has joined #linuxcnc
[02:20:02] -!- cmorley has quit [Ping timeout: 245 seconds]
[02:20:19] -!- servos4ever has quit [Ping timeout: 265 seconds]
[02:22:54] -!- sumpfralle has quit [Ping timeout: 264 seconds]
[02:38:33] -!- abetusk has quit [Quit: Leaving]
[02:45:39] -!- kwallace [kwallace!~kwallace@63.83.74.233] has parted #linuxcnc
[02:45:56] -!- mhaberler has quit [Quit: mhaberler]
[02:57:39] -!- tjb1 [tjb1!~tjb1@174.252.208.4] has joined #linuxcnc
[03:03:34] -!- mevon has quit [Quit: Ex-Chat]
[03:04:20] <Tecan> tjb1 you around ?
[03:04:27] <tjb1> always
[03:04:38] <Tecan> lol :)
[03:04:39] -!- adb has quit [Ping timeout: 244 seconds]
[03:05:11] <Tecan> check pm
[03:05:25] <Tecan> want to pick ur brain on thc
[03:05:57] <tjb1> you can try
[03:10:12] -!- cmorley [cmorley!~chris@S010600c09fc019c2.no.shawcable.net] has joined #linuxcnc
[03:12:43] -!- cmorley1 has quit [Ping timeout: 246 seconds]
[03:17:37] -!- cmorley1 [cmorley1!~chris@S010600c09fc019c2.no.shawcable.net] has joined #linuxcnc
[03:19:38] -!- cmorley has quit [Ping timeout: 244 seconds]
[03:20:44] -!- mevon [mevon!~mevon@modemcable015.35-130-66.mc.videotron.ca] has joined #linuxcnc
[03:24:19] <mevon> yay arduino cnc is alive. implamenting pos-fb now :)))
[03:25:42] <mevon> id like to thank andypugh for being such an... a good advisor and telling me that I couldnt do it, that just did it :P
[03:26:12] <mevon> oinks!
[03:34:26] -!- capricorn_1 has quit [Quit: Konversation terminated!]
[03:36:49] <jdh> what did you do?
[03:38:22] -!- capricorn_1 [capricorn_1!~raffi@zima.linwin.com] has joined #linuxcnc
[03:39:51] <roh> gnnnh. fsck. this machine has nearly 1ms jitter on the latency test for the 1ms thread. *sigh*
[03:43:50] <Tom_itx> mevon what firmware did you use?
[03:46:12] <Tecan> would a good jitter cause the gcode to not get processed or would it be like da daaa da dad ad
[03:46:21] <Tecan> on the cnc
[03:49:13] <Tecan> would a jitter cause machine damage ?
[03:51:00] <roh> what i don't get.. its near exactly the same chipset
[03:51:09] <roh> via kt400 vs km400
[03:51:53] <roh> kt400 on the mill which is working fine for a long time now (old 8.04 setup)
[03:52:09] <roh> km400 on the machine which drives the lasercutter
[03:54:44] -!- jst has quit [Quit: No Ping reply in 180 seconds.]
[03:55:00] -!- jst [jst!~quassel@2620:101:8003:200:224:e8ff:fe39:34c2] has joined #linuxcnc
[04:00:05] -!- Keknom has quit [Quit: Leaving.]
[04:01:39] <mevon> Tom_itx, sanguino
[04:02:40] <pcw_home> Jitter mainly causes stalls with software step generation but also position noise in servo systems when in motion
[04:04:12] <Tom_itx> mevon what software?
[04:04:15] <Tom_itx> marlin?
[04:04:16] <roh> oh. stupid me... acpi is still enabled
[04:05:13] <mevon> Tom_itx, it is EMC2Arduino I am tweaking
[04:05:44] <Tom_itx> what chip does sanguino use?
[04:06:00] <Tom_itx> is it the one with the usb chip on it...1287
[04:06:26] <mevon> atmega644
[04:06:41] <mevon> pdip 20 MHz
[04:06:52] <mevon> over usb
[04:07:12] <Tom_itx> stick a sd on it
[04:07:15] <Tom_itx> and you won't need usb
[04:07:46] <mevon> nah I still need linuxcnc
[04:07:49] <mevon> :S
[04:08:06] <jdh> what does it do?
[04:09:05] <roh> fsck. thats not it
[04:09:06] <mevon> for now Im engraving pcbs
[04:09:32] <jdh> what does the arduino do?
[04:09:57] <Tom_itx> controls the steppers etc
[04:10:04] <jdh> why?
[04:10:13] <Tom_itx> because it can
[04:11:55] <roh> think mesa for poor people (no pun intended)
[04:12:48] <jdh> 7i43 quantity 1 is $79
[04:13:13] <jdh> find 4 other cheap bastards and they are $63/each
[04:13:31] <roh> jdh: i know. just saying.
[04:13:54] <roh> btw.. would a mesa board make using a machine with 1ms jitter feasible?
[04:14:07] <roh> or should i rather go hunt for another 10 year old pc?
[04:14:43] <jdh> SERVO_PERIOD = 1000000
[04:14:53] <jdh> that's my 7i43
[04:15:13] <roh> well.. does it hurt if its nearly 2ms sometimes? ;)
[04:15:28] <jdh> throw it away.
[04:15:54] <roh> *g*.. i need to keep it for now. its what the laser runs on when winxp is booted atm
[04:16:24] <Tom_itx> jdh, i suppose it's the challenge of it
[04:16:36] <roh> just hoped i can keep the machine, since its really similar to the one which runs emc fine. did anything change from 2.3.1 to 2.5.1 regarding old amd crud with via chipsets?
[04:17:02] <jdh> are you two talking about the same thing?
[04:17:26] <jdh> <mevon> yay arduino cnc is alive. implamenting pos-fb now :)))
[04:17:28] <Tom_itx> who two
[04:17:33] <Tom_itx> you two?
[04:17:52] <jdh> what does arduino cnc do? interpret gcode? motion planner? io?
[04:18:27] <Tom_itx> yeah
[04:18:38] <mevon> 3axis /w servo actuators
[04:18:43] <mevon> and switches
[04:18:50] -!- Cylly [Cylly!cylly@p54B1252D.dip.t-dialin.net] has joined #linuxcnc
[04:19:11] <mevon> it can go to 9axis but not sure how rly
[04:20:00] <mevon> i also integrated the stepper driver controller in the arduino so I use 2 Hbridge motor drive for the stepper
[04:20:17] -!- Loetmichel has quit [Ping timeout: 252 seconds]
[04:20:40] <jdh> 4 IO per axis?
[04:20:40] <mevon> so maybe I could make it to 4axis easily
[04:20:45] <mevon> 5
[04:21:04] <mevon> enable
[04:21:15] <mevon> I mean I got the enable
[04:21:26] <mevon> on the drives
[04:21:52] <jdh> was it fun?
[04:22:22] <jdh> 'fun' counts for about 79% for me :)
[04:22:59] <roh> well.. its quite a bit more till one has pins on the desk.
[04:23:58] <roh> 85€+vat+shipping for me for a 7i43
[04:38:38] <mevon> it still is :P gotta learn some more python now ttyl
[04:38:53] -!- tjb1 has quit [Ping timeout: 245 seconds]
[04:46:36] -!- tjb1 [tjb1!~tjb1@174.252.208.4] has joined #linuxcnc
[04:55:27] -!- automata [automata!~automata@122.170.85.252] has joined #linuxcnc
[05:15:52] -!- L33TG33KG34R [L33TG33KG34R!~L33TG33KG@S010674ea3aa162f7.cg.shawcable.net] has joined #linuxcnc
[05:24:23] -!- FinboySlick has quit [Quit: Leaving.]
[05:36:18] zz_satyag is now known as satyag
[05:40:59] -!- crib has quit [Remote host closed the connection]
[05:41:21] -!- jpk has quit [Ping timeout: 252 seconds]
[05:43:13] <r00t4rd3d> I made a speaker:
http://i.imgur.com/rqZP0.jpg
[05:43:46] -!- crib [crib!~chris@port-92-202-39-52.dynamic.qsc.de] has joined #linuxcnc
[05:44:58] -!- cmorley1 has quit [Quit: Leaving.]
[05:46:27] <tjb1> whats that crap in the middle?
[05:50:44] -!- zzolo has quit [Quit: zzolo]
[05:51:32] -!- mutilator has quit [Ping timeout: 265 seconds]
[05:52:29] <r00t4rd3d> your envy
[05:54:42] -!- i_tarzan has quit [Read error: Operation timed out]
[05:54:58] -!- i_tarzan [i_tarzan!~i_tarzan@187.151.156.3] has joined #linuxcnc
[05:58:16] <tjb1> lulz
[05:58:31] <tjb1> are those real speakers or is that just one of those amplifier boxes?
[05:58:48] <r00t4rd3d> hollow box
[05:58:57] <r00t4rd3d> like your head
[05:59:00] <r00t4rd3d> :)
[05:59:50] <tjb1> cheap shots huh
[06:00:02] <r00t4rd3d> I was expecting you to be eating twinkies in your video
[06:00:24] <r00t4rd3d> "THC is working..."
[06:00:39] <tjb1> twinkies huh?
[06:03:04] <tjb1> I would get into the details but you might get confused :P
[06:03:24] -!- Fox_Muldr has quit [Ping timeout: 260 seconds]
[06:03:34] <roh> meh.. i guess i'm gonna hunt for d525mw on ebay then *sigh*
[06:04:45] <tjb1> roh:
http://www.ebay.com/itm/200542103383?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
[06:05:01] -!- Fox_Muldr [Fox_Muldr!quakeman@frnk-4d01e21c.pool.mediaWays.net] has joined #linuxcnc
[06:05:08] <r00t4rd3d> i got mine from him too
[06:05:11] <roh> tjb1: thats 40$ shipping. i'm in europe
[06:05:24] <tjb1> Well thats unfortunate
[06:05:39] <r00t4rd3d> newegg has them too, do they have international warehouse?
[06:05:45] <tjb1> r00t4rd3d: how do you turn your router on?
[06:05:56] <r00t4rd3d> my thumb normally.
[06:06:15] <tjb1> Wow, couldnt integrate that? :P
[06:06:29] <r00t4rd3d> no need to overly complicate things
[06:06:39] <r00t4rd3d> the switch works just fine
[06:06:56] <tjb1> 3 months until chinese new year…get all your orders in
[06:07:26] <r00t4rd3d> i could probably do it with a arduino and a powertail switch
[06:08:07] <tjb1> powertail eh
[06:08:28] <tjb1> $26!
[06:08:29] <r00t4rd3d> makes it easier and sealed
[06:08:55] <tjb1> Do you need to switch all 3 wires?
[06:09:09] <r00t4rd3d> nah just 1
[06:10:05] <r00t4rd3d> just like hooking it upto a common light switch
[06:10:17] <tjb1> http://www.ebay.com/itm/290739764281?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
[06:10:19] <tjb1> Done.
[06:10:31] <r00t4rd3d> make a hal on/off button that sends a high/low to the arduino.. is that possible?
[06:10:39] <tjb1> I imagine
[06:10:47] <roh> fsck. that doesnt work out.
[06:10:54] <roh> i need dvi video anyhow.
[06:11:02] <tjb1> Through the parallel port r00t4rd3d ?
[06:11:20] <r00t4rd3d> could be
[06:11:45] <tjb1> I have to use 5v relays with my cnc4pc BOB
[06:12:04] <tjb1> Good thing I have 2 outputs on the g540
[06:12:34] <r00t4rd3d> you see i comment in your thread lol
[06:12:35] <tjb1> r00t4rd3d: just buy that relay
[06:13:33] <tjb1> $8 vs $26
[06:14:13] <r00t4rd3d> can you switch that with just the parallel port?
[06:14:55] <r00t4rd3d> id rather do that for the vacuum
[06:14:56] <tjb1> no
[06:15:26] <tjb1> what BOB are you using?
[06:15:34] <r00t4rd3d> wtf is bob
[06:15:38] <r00t4rd3d> bobs not here
[06:20:11] <tjb1> break.out.board
[06:20:32] <r00t4rd3d> tb6560
[06:21:02] <r00t4rd3d> i have a spindle control on that lol
[06:21:09] <tjb1> big fan of ebay parts arent you
[06:21:19] <r00t4rd3d> i forgot, its only like 36v or something
[06:22:14] <tjb1> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300410191798
[06:24:30] <tjb1> thats a nice wiring diagram
[06:27:02] -!- abetusk [abetusk!~abetusk@cpe-24-58-232-122.twcny.res.rr.com] has joined #linuxcnc
[06:27:06] <abetusk> what is a spoilboard?
[06:27:25] <tjb1> r00t4rd3d: "The PCB even has a Relay interface so you can control a 120V - 220V spindle with Mach3 or EMC."
[06:27:34] <tjb1> the surface of cnc routers
[06:27:39] <tjb1> oftten cut into
[06:28:28] <tjb1> Usually a sheet of mdf that is placed and then the router faces the whole sheet to make a surface that is flat
[06:29:20] <tjb1> r00t4rd3d: you should have your router plumbed in now
[06:30:22] -!- Cylly has quit []
[06:30:29] -!- Loetmichel [Loetmichel!cylly@p54B1252D.dip.t-dialin.net] has joined #linuxcnc
[06:31:05] <Loetmichel> mornin'
[06:31:23] <tjb1> evenin'
[06:32:36] <Loetmichel> tjb1: depends on your point of living, i think. $me has just gotten up, morning coffee is brewing...
[06:32:52] <abetusk> what is mean for a router to face a whole sheet?
[06:32:58] <tjb1> its 1:30am here
[06:33:02] <Loetmichel> its 07:33 over here ;)
[06:33:04] <tjb1> abetusk: To cut the whole sheet
[06:33:06] -!- psha [psha!~psha@213.208.162.92] has joined #linuxcnc
[06:33:11] <abetusk> to level it?
[06:33:18] <tjb1> yes
[06:33:23] <abetusk> ah, thank you
[06:34:18] <Loetmichel> MDF does not really like cooling fluids, though
[06:34:40] <Loetmichel> but i had used it as sacrifical plate beneath the workepiece also
[06:35:00] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=4935
[06:35:07] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=4938
[06:35:12] <tjb1> most people that use mdf probably arent cutting anything that requires cutting fluid :P
[06:35:49] <tjb1> I want to throw water on r00t4rd3d's router and watch it expand :D
[06:36:48] <Loetmichel> the rectangle pattern is serving a dual pourpose: knowing you had mounted your workpiece straight to the edge AND allowing airflow beneath the workpiece, so the vacuum can get the swarf out
[06:37:13] <tjb1> Loetmichel: did you know you can suck a vacuum through mdf?
[06:37:14] <Loetmichel> tjb1: bah, you're bad!
[06:37:33] <Loetmichel> tjb1: not enought for the dust vacuum ti operate
[06:37:36] <Loetmichel> to
[06:37:49] <Loetmichel> and yes, i know.
[06:37:58] <tjb1> not for dust but some use it for vacuum holding
[06:38:08] <Loetmichel> http://www.cyrom.org/hajo/vakuumFEST.avi
[06:38:12] <Loetmichel> me too
[06:38:52] <tjb1> video wont load for me
[06:39:00] -!- vladimirek [vladimirek!~vladimire@95.105.250.72] has joined #linuxcnc
[06:42:34] satyag is now known as zz_satyag
[06:46:47] <Loetmichel> tjb1:
http://www.youtube.com/watch?v=XJmBF8HzWoc
[06:46:49] <Loetmichel> better?
[06:47:38] <Loetmichel> underneath the 5mm MDF it looks loke this:
http://www.cyrom.org/palbum/main.php?g2_itemId=8214
[06:49:45] <tjb1> laser cut?
[06:49:57] <Loetmichel> cnc milled
[06:50:42] <tjb1> How big of a vacuum is that?
[06:50:53] <Loetmichel> the support box is made of 1/4" and 1/8" melamin reinforced paper (FR2)
[06:51:09] <Loetmichel> vacuum cleaner, about -0,3 Bar
[06:52:32] <tjb1> too late at night for metric :)
[06:52:40] <tjb1> ill figure that out in the morning
[06:53:38] <Loetmichel> tjb1: ask google: about -4,5 psi
[06:54:26] <tjb1> How thick is your top on the vacuum box
[06:54:32] <Loetmichel> 5mm
[06:54:41] <Loetmichel> just a bit below 1/4"
[06:55:32] <Loetmichel> and faced over both sides a few tenths to get the pores open
[06:56:19] <tjb1> I dont have room for a box like that on mine…I do have enough extrusion to make a small router
[06:57:59] <tjb1> im out, good night all
[06:58:01] -!- tjb1 has quit [Quit: tjb1]
[06:58:12] <Loetmichel> *shi**... its 07:55 over here... have to be in the company at 08:00... and have a ~15min commute... *pours down his coffe, running to be at least not much late...
[07:01:54] <psha> Loetmichel: hm, 11:01 here, have to be in the company at 9:00...
[07:02:34] * psha making another cup of tee since already too much late
[07:03:12] zz_satyag is now known as satyag
[07:17:56] -!- r00t4rd3d has quit [Read error: Connection reset by peer]
[07:18:26] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@cpe-67-249-21-218.twcny.res.rr.com] has joined #linuxcnc
[07:18:27] -!- r00t4rd3d has quit [Changing host]
[07:18:27] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@unaffiliated/r00t4rd3d] has joined #linuxcnc
[07:21:29] -!- cmorley [cmorley!~chris@S010600c09fc019c2.no.shawcable.net] has joined #linuxcnc
[07:34:43] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@unaffiliated/r00t4rd3d] has parted #linuxcnc
[07:34:43] -!- r00t4rd3d [r00t4rd3d!~r00t4rd3d@unaffiliated/r00t4rd3d] has joined #linuxcnc
[07:41:00] <Loetmichel> psha: hrhr
[07:41:47] <Loetmichel> <- arrived at the company... its bad that i have a commute where the traffic jams every morning
[07:41:58] <Loetmichel> and no way around
[07:44:42] -!- dhoovie [dhoovie!~yeaaaah@122.177.231.7] has joined #linuxcnc
[07:47:04] -!- dhoovie has quit [Client Quit]
[07:49:01] -!- toastydeath has quit [Read error: No route to host]
[07:49:05] -!- toastyde1th [toastyde1th!~toast@c-69-244-86-195.hsd1.md.comcast.net] has joined #linuxcnc
[07:56:41] satyag is now known as zz_satyag
[07:57:03] <r00t4rd3d> http://qoou.net/images/2012/11/20/0Elx.jpg
[07:57:06] <r00t4rd3d> lol
[07:59:36] -!- herron has quit [Ping timeout: 276 seconds]
[08:00:08] -!- dhoovie [dhoovie!~kvirc@122.177.231.7] has joined #linuxcnc
[08:05:05] <Loetmichel> ?
[08:08:13] <r00t4rd3d> mitt romney
[08:08:36] <r00t4rd3d> taken yesterday
[08:11:59] -!- herron [herron!~herron@80.175.14.110] has joined #linuxcnc
[08:16:08] zz_satyag is now known as satyag
[08:19:55] <Loetmichel> ah.
[08:20:18] <Loetmichel> <- german, so i dont recognized him,
[08:20:45] <Loetmichel> but why shouldnt he get fuel like everybody else?
[08:20:57] <Loetmichel> s/dont/didnt
[08:27:10] -!- beawesomeinstead has quit [Max SendQ exceeded]
[08:27:11] -!- phillipadsmith has quit [Read error: Operation timed out]
[08:33:01] -!- beawesomeinstead has quit [Changing host]
[08:33:01] -!- beawesomeinstead has quit [Changing host]
[08:33:25] satyag is now known as zz_satyag
[08:39:35] -!- theos has quit [Read error: Connection reset by peer]
[08:41:58] -!- theos [theos!~theos@unaffiliated/theos] has joined #linuxcnc
[08:45:25] zz_satyag is now known as satyag
[08:50:36] -!- maximilian_h [maximilian_h!~bonsai@130.255.104.21] has joined #linuxcnc
[08:59:58] satyag is now known as zz_satyag
[09:01:06] -!- pingufan [pingufan!~rainer@goliath.hantsch.co.at] has joined #linuxcnc
[09:04:06] -!- kmiyashiro has quit [Quit: kmiyashiro]
[09:06:36] -!- vladimirek has quit [Remote host closed the connection]
[09:10:06] -!- rob_h [rob_h!~rob_h@027c00e2.bb.sky.com] has joined #linuxcnc
[09:14:09] theos is now known as Guest80686
[09:14:26] -!- theos [theos!~theos@unaffiliated/theos] has joined #linuxcnc
[09:16:53] -!- Guest80686 has quit [Ping timeout: 252 seconds]
[09:18:48] -!- Adventsparky has quit [Client Quit]
[09:21:09] -!- asdfasd [asdfasd!grgrgrgrg@149.241.153.128] has joined #linuxcnc
[09:24:42] -!- pingufan has quit [Quit: Konversation terminated!]
[09:26:40] -!- djdelorie has quit [Ping timeout: 246 seconds]
[09:27:48] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc
[09:42:51] -!- djdelorie [djdelorie!~dj@65.175.133.60] has joined #linuxcnc
[09:45:46] -!- b_b has quit [Changing host]
[09:54:01] -!- djheinzNO has quit [Read error: Connection reset by peer]
[09:54:30] -!- djheinzNO [djheinzNO!~henning@164.90.45.31.customer.cdi.no] has joined #linuxcnc
[09:55:50] -!- asdfas [asdfas!grgrgrgrg@149.241.153.128] has joined #linuxcnc
[09:56:29] -!- asdfasd has quit [Ping timeout: 252 seconds]
[10:00:39] -!- theorb_ [theorb_!~theorb@91.84.53.6] has joined #linuxcnc
[10:01:05] -!- theorbtwo has quit [Ping timeout: 255 seconds]
[10:23:32] -!- holst [holst!~rasmus@h196.natout.aau.dk] has joined #linuxcnc
[10:40:42] -!- vladimirek [vladimirek!~vladimire@95.105.250.72] has joined #linuxcnc
[10:43:52] -!- DJ9DJ [DJ9DJ!~Deejay@unaffiliated/dj9dj] has joined #linuxcnc
[10:44:07] <DJ9DJ> moin
[10:51:28] <mazafaka> moin
[10:56:29] -!- mackerski has quit [Quit: mackerski]
[11:00:06] -!- holst has quit [Quit: Leaving]
[11:08:14] -!- maximilian_h [maximilian_h!~bonsai@130.255.104.21] has parted #linuxcnc
[11:08:17] -!- sumpfralle [sumpfralle!~lars@31-16-107-207-dynip.superkabel.de] has joined #linuxcnc
[11:12:42] -!- Flipp has quit [Ping timeout: 264 seconds]
[11:29:13] -!- Simooon [Simooon!~simon@h196.natout.aau.dk] has joined #linuxcnc
[11:48:44] -!- paideia [paideia!~paideia@149.155.218.26] has joined #linuxcnc
[11:59:03] -!- paideia has quit [Read error: Connection reset by peer]
[12:25:14] -!- dhoovie has quit [Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/]
[12:29:54] -!- herron has quit [Ping timeout: 240 seconds]
[12:36:57] -!- paideia [paideia!~paideia@149.155.195.23] has joined #linuxcnc
[12:42:29] -!- herron [herron!~herron@80.175.14.110] has joined #linuxcnc
[12:59:54] -!- b_b has quit [Changing host]
[13:11:32] -!- gambakufu has quit [Ping timeout: 252 seconds]
[13:12:59] -!- mozmck has quit [Quit: Leaving.]
[13:14:18] -!- mozmck [mozmck!~moses@client-204.235.45.161.wcfltx.partnershipbroadband.com] has joined #linuxcnc
[13:14:28] -!- gambakufu [gambakufu!~mooznach@bzq-82-81-4-144.red.bezeqint.net] has joined #linuxcnc
[13:35:40] -!- b_b has quit [Changing host]
[13:55:50] -!- FinboySlick [FinboySlick!~shark@74.117.40.10] has joined #linuxcnc
[13:58:11] -!- sumpfralle has quit [Ping timeout: 252 seconds]
[13:58:43] <FinboySlick> Good morning everyone!
[14:01:20] <jdh> GOOD $TIME_OF_DAY to you SIR.
[14:03:35] -!- servos4ever [servos4ever!~chatzilla@173-87-53-44.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[14:33:34] -!- emel has quit [Read error: Connection reset by peer]
[14:35:20] -!- paideia has quit [Quit: Leaving]
[14:46:15] -!- alpha1125 has quit [Quit: Computer has gone to sleep.]
[14:49:59] -!- alpha1125 [alpha1125!~textual@nat/cisco/x-siqvsgbeeqcygiwq] has joined #linuxcnc
[15:01:58] -!- the_wench has quit [Ping timeout: 246 seconds]
[15:02:14] -!- archivist has quit [Ping timeout: 240 seconds]
[15:08:25] -!- syyl_ [syyl_!~syyl@p4FD126F3.dip.t-dialin.net] has joined #linuxcnc
[15:09:37] zz_satyag is now known as satyag
[15:11:50] -!- syyl has quit [Ping timeout: 268 seconds]
[15:15:08] -!- archivist [archivist!~archivist@host81-149-189-98.in-addr.btopenworld.com] has joined #linuxcnc
[15:15:54] -!- automata has quit [Ping timeout: 240 seconds]
[15:16:12] theorb_ is now known as theorbtwo
[15:37:36] -!- the_wench [the_wench!~the_wench@host81-149-189-98.in-addr.btopenworld.com] has joined #linuxcnc
[15:43:16] <archivist> hmm lots of axes
https://www.apexauctions.co.uk/auction/itemDetails.htm?lotId=88499&utm_source=Pure&utm_medium=Email&utm_campaign=Witzig_&_Frank
[15:51:56] <mazafaka> are they really needed? For some sort of details maybe...
[15:53:00] <pcw_home> Hmm thats a little on the big side
[16:21:31] -!- tjb1 [tjb1!~tjb1@95.sub-174-231-11.myvzw.com] has joined #linuxcnc
[16:23:05] -!- adb [adb!~IonMoldom@178-211-235-11.dhcp.voenergies.net] has joined #linuxcnc
[16:24:22] -!- IchGuckLive [IchGuckLive!~chatzilla@95-89-101-95-dynip.superkabel.de] has joined #linuxcnc
[16:24:27] <IchGuckLive> hi all B)
[16:26:01] -!- skunkworks [skunkworks!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc
[16:26:19] -!- ve7it [ve7it!~LawrenceG@S0106001c10b7770f.pk.shawcable.net] has joined #linuxcnc
[16:26:53] -!- psha has quit [Quit: Lost terminal]
[16:27:39] satyag is now known as zz_satyag
[16:32:35] -!- Simooon has quit [Ping timeout: 255 seconds]
[16:32:47] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 16.0.2/20121025205401]]
[16:33:31] -!- markvandenborre has quit [Read error: Operation timed out]
[16:33:39] -!- markvandenborre [markvandenborre!~mark@li19-195.members.linode.com] has joined #linuxcnc
[16:36:06] -!- bmwyss has quit [Quit: bmwyss]
[16:38:25] -!- micges [micges!~micges@adcs119.neoplus.adsl.tpnet.pl] has joined #linuxcnc
[16:38:35] -!- syyl_ws [syyl_ws!~sg@p4FD126F3.dip.t-dialin.net] has joined #linuxcnc
[16:40:25] -!- tjb1 has quit [Quit: tjb1]
[16:46:53] -!- Simooon [Simooon!~simon@gw.obelnet.dk] has joined #linuxcnc
[16:49:29] -!- kwallace [kwallace!~kwallace@smb-55.sonnet.com] has joined #linuxcnc
[17:03:43] -!- vladimirek has quit [Ping timeout: 244 seconds]
[17:06:03] -!- ve7it has quit [Remote host closed the connection]
[17:07:43] -!- toudi_ [toudi_!~toudi@adcs119.neoplus.adsl.tpnet.pl] has joined #linuxcnc
[17:07:52] -!- toudi_ [toudi_!~toudi@adcs119.neoplus.adsl.tpnet.pl] has parted #linuxcnc
[17:17:10] -!- tayy has quit [Remote host closed the connection]
[17:25:25] zz_satyag is now known as satyag
[17:30:01] -!- mackerski has quit [Quit: mackerski]
[17:47:03] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[17:48:02] -!- b_b has quit [Changing host]
[18:01:41] satyag is now known as zz_satyag
[18:05:31] -!- IchGuckLive [IchGuckLive!~chatzilla@95-89-101-95-dynip.superkabel.de] has joined #linuxcnc
[18:10:47] -!- ve7it [ve7it!~LawrenceG@S0106001c10b7770f.pk.shawcable.net] has joined #linuxcnc
[18:17:29] -!- hewball has quit [Ping timeout: 246 seconds]
[18:17:55] -!- hewball [hewball!~Hewball@2403:dc00:ffff:fffc:226:18ff:fe3a:3bad] has joined #linuxcnc
[18:20:05] -!- psha [psha!~psha@213.208.162.92] has joined #linuxcnc
[18:32:58] -!- alpha1125 has quit [Quit: Computer has gone to sleep.]
[18:36:35] -!- mazafaka1 [mazafaka1!~Mufasa@unaffiliated/mazafaka] has joined #linuxcnc
[18:36:37] -!- mazafaka has quit [Ping timeout: 252 seconds]
[18:37:00] -!- plushy has quit [Quit: Leaving.]
[18:48:48] -!- kwallace has quit [Read error: Operation timed out]
[18:49:39] -!- kwallace [kwallace!~kwallace@smb-168.sonnet.com] has joined #linuxcnc
[18:52:52] -!- ve7it has quit [Remote host closed the connection]
[18:55:19] -!- vladimirek [vladimirek!~vladimire@95.105.250.72] has joined #linuxcnc
[19:04:07] <IchGuckLive> heavy posting today O.O
[19:04:33] -!- yoyoek1 [yoyoek1!~yoyo@c20-97.icpnet.pl] has joined #linuxcnc
[19:04:53] <yoyoek1> hi
[19:05:06] <IchGuckLive> Hi
[19:13:00] -!- grummund has quit [Ping timeout: 276 seconds]
[19:13:01] -!- motioncontrol [motioncontrol!~io@host211-91-dynamic.10-87-r.retail.telecomitalia.it] has joined #linuxcnc
[19:14:05] <yoyoek1> new release of mgcodegenerator :) big improvement in 3d bake :) and pockets
[19:14:57] <IchGuckLive> does this run under 10.04
[19:15:36] <yoyoek1> if you have blender 2.49b then yes
[19:15:59] <IchGuckLive> oh on 2.49b this is realy old stuff
[19:16:09] <IchGuckLive> 2.64 inside
[19:16:30] <yoyoek1> you can have both versions parallel
[19:16:42] <IchGuckLive> i know i got them all
[19:16:58] <IchGuckLive> where is the new script
[19:17:09] -!- yuvipanda has quit [Read error: Connection reset by peer]
[19:17:36] <yoyoek1> aa :) ye one sec :P
[19:18:14] <IchGuckLive> oh you are the one that is writing it
[19:18:19] <yoyoek1> ok corrected
[19:18:49] <yoyoek1> yes I'm autor
[19:18:52] <IchGuckLive> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?GcodeGenerator
[19:19:00] <yoyoek1> author
[19:19:19] <IchGuckLive> 0.2.09
[19:20:57] <IchGuckLive> there is a dead link
http://yoyo.ghost.pl/mgcodegenerator.html
[19:21:26] <yoyoek1> it working for me
[19:21:37] <yoyoek1> you don't have button for donation ?
[19:21:57] <IchGuckLive> ah a little one i see
[19:22:04] -!- andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust639.basl.cable.virginmedia.com] has joined #linuxcnc
[19:22:29] <yoyoek1> for small beer :)
[19:22:43] <IchGuckLive> is the 09 the lattest
[19:23:23] <yoyoek1> 0.2.09 i release it today
[19:23:45] <IchGuckLive> i will compare to my heeks with simba
http://www.youtube.com/watch?v=jtymMSJy8AA
[19:23:57] <IchGuckLive> ok then i check it tomorrow
[19:24:32] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 16.0.2/20121025205401]]
[19:26:39] <yoyoek1> that heeks loop pro :)
[19:26:53] <yoyoek1> looks
[19:38:45] -!- grummund [grummund!~user@unaffiliated/grummund] has joined #linuxcnc
[19:43:52] -!- syyl_ws has quit [Remote host closed the connection]
[19:50:44] -!- kwallace1 [kwallace1!~kwallace@smb-236.sonnet.com] has joined #linuxcnc
[19:52:27] -!- kwallace has quit [Ping timeout: 260 seconds]
[19:53:33] -!- horatio_cromwell has quit [Quit: Leaving.]
[20:02:46] -!- ve7it [ve7it!~LawrenceG@S0106001c10b7770f.pk.shawcable.net] has joined #linuxcnc
[20:16:13] -!- yoyoek1 has quit [Ping timeout: 252 seconds]
[20:23:56] -!- rob_h has quit [Quit: Leaving]
[20:28:18] -!- mhaberler has quit [Quit: mhaberler]
[20:28:26] -!- Nick001-Shop [Nick001-Shop!~chatzilla@69.72.53.237] has joined #linuxcnc
[20:35:08] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc
[20:43:19] -!- mevon has quit [Read error: Connection reset by peer]
[20:44:10] -!- mevon [mevon!~mevon@66.130.35.15] has joined #linuxcnc
[20:52:14] -!- vladimirek has quit [Remote host closed the connection]
[20:52:49] -!- psha has quit [Quit: Lost terminal]
[21:06:21] -!- mevon_ [mevon_!~mevon@66.130.35.15] has joined #linuxcnc
[21:09:18] -!- mevon has quit [Ping timeout: 245 seconds]
[21:13:02] -!- zzolo has quit [Quit: zzolo]
[21:27:08] -!- motioncontrol has quit [Quit: Sto andando via]
[21:29:06] -!- wboykinm has quit [Remote host closed the connection]
[21:34:48] -!- sumpfralle [sumpfralle!~lars@31.16.107.207] has joined #linuxcnc
[21:47:46] -!- micges has quit [Quit: Leaving]
[21:52:28] -!- Yarl has quit [Remote host closed the connection]
[21:53:52] -!- micges [micges!~toudi@adcs119.neoplus.adsl.tpnet.pl] has joined #linuxcnc
[22:04:06] <DJ9DJ> gn8
[22:05:13] -!- DJ9DJ has quit [Quit: bye]
[22:05:36] -!- FinboySlick has quit [Quit: Leaving.]
[22:13:29] -!- alpha1125 [alpha1125!~textual@198-84-166-153.cpe.teksavvy.com] has joined #linuxcnc
[22:14:16] -!- Nick001-Shop has quit [*.net *.split]
[22:14:16] -!- tayy has quit [*.net *.split]
[22:14:16] -!- PCW has quit [*.net *.split]
[22:14:17] -!- Tom_itx has quit [*.net *.split]
[22:14:17] -!- morfic- has quit [*.net *.split]
[22:14:43] -!- PCW [PCW!~chatzilla@99.88.10.65] has joined #linuxcnc
[22:14:55] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[22:14:58] -!- morfic- [morfic-!~morfic@unaffiliated/morfic] has joined #linuxcnc
[22:15:41] -!- Nick001-Shop [Nick001-Shop!~chatzilla@69.72.53.237] has joined #linuxcnc
[22:18:56] -!- Keknom [Keknom!~monkeky@c-76-125-214-194.hsd1.pa.comcast.net] has joined #linuxcnc
[22:24:33] -!- kwallace1 has quit [*.net *.split]
[22:24:34] -!- servos4ever has quit [*.net *.split]
[22:24:34] -!- mozmck has quit [*.net *.split]
[22:24:34] -!- beawesomeinstead has quit [*.net *.split]
[22:31:06] -!- horatio_cromwell has quit [Quit: Leaving.]
[22:31:17] -!- servos4ever [servos4ever!~chatzilla@173-87-53-44.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[22:32:41] -!- kwallace [kwallace!~kwallace@smb-236.sonnet.com] has joined #linuxcnc
[22:33:41] -!- mozmck [mozmck!~moses@client-204.235.45.161.wcfltx.partnershipbroadband.com] has joined #linuxcnc
[22:44:11] -!- DearLeader [DearLeader!~Dear@189.222.41.107.dsl.dyn.telnor.net] has joined #linuxcnc
[23:00:50] -!- Brian__ [Brian__!~Dear@201.171.158.54.dsl.dyn.telnor.net] has joined #linuxcnc
[23:04:01] -!- DearLeader has quit [Ping timeout: 252 seconds]
[23:07:16] -!- syyl_ has quit [Quit: Leaving]
[23:23:26] -!- Simooon has quit [Quit: Leaving]
[23:25:21] -!- Brian__ has quit [Quit: Leaving]
[23:30:43] -!- The_Ball has quit [Ping timeout: 268 seconds]
[23:37:36] -!- mhaberler has quit [Quit: mhaberler]
[23:40:25] <andypugh> Hmm, worth a punt? (not as-described)
http://www.ebay.co.uk/itm/140889913857
[23:43:53] <Tom_itx> 30 taper?
[23:43:56] <Tom_itx> looks like it
[23:44:12] <andypugh> Looks like some 30INT, some BT30, and some foreigners
[23:45:47] <andypugh> archivist:
http://www.ebay.co.uk/itm/CVA-lathe-parts-Schaublin-Traub-Help-needed-to-identify-parts-please-/150948403384?pt=UK_Home_Garden_PowerTools_SM&hash=item232539d8b8
[23:46:18] -!- adb has quit [Ping timeout: 264 seconds]
[23:53:46] -!- ve7it has quit [Remote host closed the connection]
[23:53:57] -!- plushy has quit [Quit: Leaving.]
