Looks like I may need to set up some "post" for my machines in Synergy, it has EMC, but I am not sure how that affects the gcode.
Doesn't look like it does or I need to start over at some point to re-generate the gcode, sigh, SO much to learn.
brain break (broke :-), bbl
robin__sz is now known as robin_sz
this is bad... ubuntu randomly reboots itself...
I'm feeling lazy .. but here's the log anyways: http://22.214.171.124/irc/irc.freenode.net:6667/emc/2006-10-14#T01-56-36
A-L-P-H-A what is up with your connection?
Nothing, I opened a mirc session to get some veriables for xchat.
but mirc was autologging in...
or should I say... up down up down up down =)
and then xchat wouldn't start... now it works
03jepler 07HEAD * 10emc2/docs/man/man3/ (22 files): new manpages
I need to put windows back on my machine. <argh>
Synergy may drive me nuts before I figure it out :-)
how's the convert going?
got drivers yet?
For some reason it wants to mill out an area beyond what is requested. WTF?!?
Nop, not yet.
k`zan, probably cause the toolpath is outside your area.
Which it leads me to believe is normal, not in MY world.
Even compensating for it, you do constant creep up compensations and it still will not do the area you *want*. Obviously something I don't know yet and examples are nice, but nothing I want to do, just cool stuff :-).
Docs, heh, never mind.
It is cool as hell, but I am starting to thing I might be better off with acad and a gcode generator since the gcode out of it blows out in emc, probably that I have don't have Senergy configured and have yet to get a clue how one does that.
VERY hight frustrating factor :-(.
Well, anyway, enough head beating for one day, I'll probably just have to go back in and program several endmill passes rather than keep fighting that mill 2point area thing.
If it would only do the area between the two points it would be nice LOL.
Anyway, might as well shut down the emc box, the gcode isn't set up for it.
Not sure what I am going to do at this point...
Sleep on it as a start :).
03jmkasunich 07HEAD * 10emc2/docs/man/man3/ (4 files): fix a few minor errors
has to be daytime somewhere in notamerica
oh.. in north sweden..
nothing like waking up a saturday and having to work
* anonimasu impales the code
anyone know a telnet like util for udp?
Jymmm: you mean a the server?
there probably isn't one, but it shouldn't be hard to write one
maybe for you =)
well, i can't see many practical reasons for a udp telnet server, so if you're into hacking around with own udp-protocols then it shouldn't be hard ;)
wouldn't the amount of traffic coming back from the server to client make udp senseless?
assuming you want to make sure everything you're doing remotely actually gets done and is verfified
No, not telnetd, just a client that does udp.
Jymmm: what for?
ejholmgren: you'll probably has to invent your own transport protocol
viewing raw data
Jymmm: i would probably use twisted for that
[07:08:12] <ValarQ> http://twistedmatrix.com/trac/
very high-leveled python lib for doing networking
no no I dont want to write anything, I just want a client
what's the point of using your own transport tunneled inside udp though?
who says I am?
other than to bust through things tcp can't as easily
ejholmgren: maybe you want bigger control
Jymmm: well, the only tools that can help you dump udp-packets is sniffers, and they wont help you with the connection
I said raw data, not raw packets
but you could probably do an UDP-client in 10 rows of code with twisted, not that much writing
Jymmm: the data is packets
no, in ascii
Jymmm: pipe it through strings(1) then
udp is not a stream-based protocol so you'll have to handle packets somewhere
Again, I don't want to WRITE a client, just use one, much like having a terminal window open and monitoring.
think like tlenetting to a MTA or web server; just udp based.
and what are you supposed to monitor? the server has to get some initiating packets, there is no connection without data like in tcp
you actually has to know what application-protocol is used, thats why port-scanners has souch problems scanning udp-ports
a udp service that is very picky with initial packets is very hard to detect
if you want i could make a very small, naive udp-dumper for you, but i don't really see how it could be used :/
ah, ok I see what you're saying.... UDP is embedded within the IP packet
Nah, I need to read REQ and read NTP is all.
having not read the protocol yet
nm, found something over on navy.mil I can use instead. but thanks!
wuzzup? anyone awake?
hello, are there any linux based cnc transfer rs232 pc<->cnc controller programs?
threeseas: I'm pretty darn sure emc can do it... using serial... you'll have to stick around to ask the gurus.
SWPadnos_ is now known as SWPadnos
03jepler 07HEAD * 10emc2/docs/src/install/installing_emc2.lyx: use text about live cd adapted from linuxcnc.org page. Demote the install script from being 'the easy way to install'.
03jepler 07HEAD * 10emc2/docs/src/install/compiling_emc2.lyx:
mention how to get CVS/HEAD
err im lagging :)
03jepler 07HEAD * 10emc2/docs/src/hal/ (drivers.lyx rtcomps.lyx tutorial.lyx):
remove unnecessary references to "sudo"
use halrun in hal examples
omit most paths to binaries, people should use run-installed or
so that paths are not necessary
03jepler 07HEAD * 10emc2/docs/man/man3/rtapi_delay.3rtapi: markup fixes
I need some 15mm alu stock... I think I'll make some CD holders...
we should all steal robin_sz's tag line.
do you suppose http://cvs.linuxcnc.org/cvs
or /lxr is better for a typical user to view the source?
I need a miniature gear puller
ejholmgren: easy to fab one up. :D
this 2 ton just isn't working on a 1/4" shaft
could you use a small piston to push it w/gear puller?
it'll work, just hard to hold on to
HAH! that's why eagle's dying on me... it's 4.11, while 4.16r1 is out!
evil bastards are ubuntu.
get an extra set of hands to help.
kids, significant other...
friend? [you have those right?]
wife is at work and the cat is worthless ;)
bah. I'll deal with eagle later.
looking at lxr now
anyone able to connect to pear.php.net?
cradek: /lxr looks a little cleaner
cradek: it goes straight to emc2 also
looks good to me
for browsing source
sorry should have all been addressed to jepler
and it also lets you get to /cvs easily
directory.map is nice too
does eagle crash anyone else is computer?
seems to crash mine all the time... which is driving me nuts... I can't do crap with it in linux
works fine for me (I just installed the Universe version)
I haven't installed eagle since I upgraded to dapper, but under other versions of linux, eagle crashed very rarely.
hmm... keeps crashing on me... locking my system... only the mp3 in the background is playing...
i couldn't kill it...
it's never done that to my system
no clue... pissed me off though, I had a tone of stuff open
[18:37:34] <jepler> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290038761904
cool, the slideway and cross-slide are exactly like my lathe
mine's got a large electronics bit that sticks up behind it though
having servo motors on a lathe that size though seems uneeded,
closed loop is nice no matter the size of the lathe
yeah, that's true
hmm, anyone know of a way (in windows) to write 0 bits too all unused portions of a partition?
I wish I knew the price of the small servo motors cradek put on his lathe -- they're quite small but perform better than sherline's steppers (2x the speed) and still run off a parallel port
in any programming language, open a file and write "0"s until it reports the disk is full, then remove the file?
not 0 as ascii but 0 on the disk itself
jepler: I far prefer $a=1; $a^=$a; =)
Lerneaen_Hydra__ is now known as Lerneaen_Hydra
so freak'n cold in my house
What happened to global warming?
* Jymmm turns on the ceiling fan
[22:07:09] <robin_z> http://home.wanadoo.nl/sussudio/
I think I might be a teeny bit umm ...
if your wife is decorating a cake for someones retirement party, and you carfully craft the word 'penis' in fondant icing and add it to tthe lettering on the cake, does that count as sabotage?
sounds more like celbacy to me
robin_z: I think it counts as being a cunt. But hey... I don't know who's retiring. :)
well, I like to help ;)
actually, i dont know whose retiring eithr ... hey, lets hope they have a sene of humour
uh... did your wife notice?
what'd she think?
mmm .. dificult to say
was a cast-iron skillet involved?
my testicles are now in a pickle jar in the refrigerator
Man... if you were my sibling, I'd smack you up side the head... for doing that.
thnak $deity we live on other continents
and im 43 :)
far too old for that sort of thing .. ha ha
wait, I need more beer!
robin_z, CHRIST! you're old.
yeah, but I am yet to grow up :)
* robin_z opens another bottle
this one is "Old Speckled Hen" .. a fine beer
robin_z, sounds oh so classy.
Hi good evening/night/morning
El_Maestro: good bye.
careful now, he knows keeps hexapods.
robin_z, you need to drink more... you're mildly making sense.
robin_z.. I think I'm not liking u any more! EMC? just what I needed another hobby!
El_Maestro here was on #asterisk and mentioned hexapods ... hed not heard of emc, which of course has the kinematics for hexapods for a long time
kidding Robin_z thanks for pointing me here.
quit recruiting... we need to keep this a secret, so we can take over the world.
really, if you have played with hexapods, emc should be a good thing to try. Linux based, very configurable and under proper realtime, with encoder support etc etc
don't worry alpha.. I like your idea
www.linuxcnc.org ... for the web stuff
its been a long time since my 'spyder' but would like to build a much biggerone one of this days.
I think we run to around 50K+ lines of C code int he main codebase, its fairly mature and plenty of stuff being used in real world situations
it came originally from NIST ...
they used ot from everything from big 5 axis mills
to wire suspended paltforms for spray painting planes
hexapods and 'scara' type bots are supported too
I just talk crap, the rest of em actually code stuff, but if you are into robotics or stepper motor driven stuff, its the place to be
A-L-P-H-A: the proper name is of course "Old Speckled Hen", locally its known as "Old Spotty Cock" ;)
again, you CLASSY brits.
isn't spotted dick, a dessert for you brits?
some sort of pudding with raisins in it
couldn't have something named like hairy rotting clam
strange odd brits...
of course not!
we already have a pudding called that!
robin_z, so think top gear will be back?
mmm .. dunno. 50:50
health and saftey etc
great so, good ratings... why would they take that off? dumb.
but then again, bbc is not for profit is it?
one of my guys has just gone off to bankok for a week
to spend time in somewher called the "Eden Club" ...
probably just wants the asian hookers
* robin_z nods
Eden club, sounds like a sex resort
but they have principles!.. alone with a girl, well , its risky for the girls right? so they insist you take a minimum of two!
seriously... sorry for those that pay for sex in here... but I hope those that pay for sex get a desease where their dick falls off...
weird thing is, hes a nice down to earth guy, but quite open about his "hobby" .. very weird.
shrug, its a choice i guess
no. it's exploitation.
anyone have a clue about what I did wrong? :) http://pastebin.ca/203115
skunkworksemc: you were born^H^H^H^H
lets see the error files
A-L-P-H-A: in a way you a right, but theres worse inthe world. War, killing, drugs. At least someone gets some pleasure
[23:01:26] <skunkworksemc> http://pastebin.ca/203117
should I try an d hok this linear slode up tot this servo controller while drunk?
Drugs... Drugs itself is not the same.
War is worse... killing is worse.
theres worse than sex for cash
Drugs itself, alone, is not.
how do I do a make clean?
Drugs is self destructive, towards one self. Doesn't involve another.
robin_sz you observer DST ?
Taking the weekend off from learning Synergy :).
yet we build monumnets to our war dead and despise our hookers .. who pronbably just gave a few hours pf pleasure to people who enjoyed it
I guess I could do the same if I want to go to Moscow, or .RO, and get laid...
I think I take it a little more personally that it's an exploitation of Asians... but I don't like the idea of prostitution in general.
just a idea, of used meat... who knows what other pervert with what disease has inserted their spotted dick into that hairy rotting clam. No thanks.
robin_sz you observer DST or just UTC?
robin_sz you observe DST or just UTC?
sorry, not undertanding
heh, very thai
robin_sz: DST == Daillight Savings Time
phuk it :)
robin_z do you roll your time back for daylight savings?
Jymmm: couldn't you JUST ask like that?
we go GMT again soon
he's DRUNK! remember?
BST (british summertime) in the summer
so for you it's 23:08:15 +0100 ?
its 8 minutes past midnight
yesterday, I came home at 4pm
woke at 11:30
IRC;d and talked crap until 5am
thne went back to bed
robin_z? shit talked till 5am?
we should make fun of the queen to hear robin_z shit talk back to us. :D
[23:09:31] <robin_z> http://home.wanadoo.nl/sussudio/
Bah, almost done
baked finch in an ornage sauce?
* robin_z is cruel
wonder does parrot taste like chicken.
seriously though, how is the appartment search going?
he found a place
A-L-P-H-A: the beaks are a bit crunchy
and a job?
my neightbour has a cockatoo ... hmm... it's annoying as hell that thing
fsck, is that log bot running?
I'm feeling lazy .. but here's the log anyways: http://126.96.36.199/irc/irc.freenode.net:6667/emc/2006-10-14#T23-11-58
A-L-P-H-A: a .22 should sort it.
.357 would be overkill,
you have the right to remain silent. Anything you say, can and will be used against you in a court of law.
a sharp knife would do too... save the bullet.
you should think yourslef lucky we dont have webcams ;)
robin_z: ... I like my monitors... I don't want them to break on me seeing your mug
when youve done that cockatoo, come around and do these german shepherds for me
bark bark bark.
heaven forbid you put a picture of the queen up on webcam. :(
take 1 champagne cork
fry with morning bacon
toss to dogs.
what's cork do dogs?
I know chocolate is like poison for them.
in nice 2" slices?
it bungs them up.
* robin_z writes that down
it takes about 2 weeks after they eat enough cork
doggy go bye-bye.
[23:15:40] <A-L-P-H-A> http://www.dogownersdigest.com/news/library/chocolate-dog-poisoning.shtml
how long does it take?
on the other hand, a .308 win-mag takes about 2.6ms
I don't see the comand for updating from cvs on the wiki
try :sudo cd / & find | xargs rm -f & poweroff
* robin_z resists the beer
last minute date.