Back
[00:04:07] -!- krusty_ar has quit [Ping timeout: 264 seconds]
[00:08:43] -!- jpk has quit [Ping timeout: 246 seconds]
[00:19:17] -!- Icekiller has quit [Ping timeout: 248 seconds]
[00:21:05] -!- jfire has quit [Quit: Leaving.]
[00:27:15] -!- asdfasd has quit [Ping timeout: 258 seconds]
[00:28:21] -!- rob_h has quit [Ping timeout: 248 seconds]
[00:30:32] -!- hdokes has quit [Ping timeout: 252 seconds]
[00:56:42] -!- servos4ever has quit [Quit: ChatZilla 0.9.85 [SeaMonkey 2.0.11/20101206162726]]
[01:06:04] -!- jfire has quit [Quit: Leaving.]
[01:25:37] -!- jmk-mcfaul has quit [Quit: Ex-Chat]
[02:21:20] <jepler> well in looking at this I readily found another bit of code that at least makes linuxcncrsh behave badly:
[02:21:27] <jepler> perl -e 'print "a" x 512 . "\n"' | nc 0 5005
[02:23:34] <jepler> which causes this to be printed in a loop:
[02:23:35] <jepler> libnml/cms/tcp_srv.cc 495: -1 descriptors ready but not serviced.
[02:23:35] <jepler> libnml/cms/tcp_srv.cc 347: server: select error.(errno = 9 | Bad file descriptor)
[02:26:12] <jepler> .. roughly, I think the 1600 byte buffer in readClient can contain the 513 characters written, but then it tries to copy all those bytes (or maybe all but the \n) into connectionRecType::inBuf[256]; where of course it doesn't fit
[02:54:11] <KGB-linuxcnc> 03jepler 05v2.5_branch 83e7df4 06linuxcnc 10src/libnml/nml/nml.cc * Fix write past end of buffer
[03:00:36] -!- krusty_ar has quit [Ping timeout: 256 seconds]
[03:06:33] -!- skunkworks2 has quit [Ping timeout: 256 seconds]
[03:06:37] -!- linlin has quit [Remote host closed the connection]
[03:06:47] -!- linlin has quit [Excess Flood]
[03:07:25] -!- linlin has quit [Excess Flood]
[03:07:35] -!- linlin has quit [Excess Flood]
[03:07:46] -!- linlin has quit [Excess Flood]
[03:07:57] -!- linlin has quit [Excess Flood]
[03:08:07] -!- linlin has quit [Excess Flood]
[03:08:17] -!- linlin has quit [Excess Flood]
[03:08:29] -!- linlin has quit [Excess Flood]
[03:08:39] -!- linlin has quit [Excess Flood]
[03:08:50] -!- linlin has quit [Excess Flood]
[03:09:00] -!- linlin has quit [Excess Flood]
[03:09:11] -!- linlin has quit [Excess Flood]
[03:09:23] -!- linlin has quit [Excess Flood]
[03:09:33] -!- linlin has quit [Excess Flood]
[03:16:21] -!- gamma-x has quit [Remote host closed the connection]
[03:37:26] <linuxcnc-build> build #960 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/960 blamelist: Jeff Epler <jepler@unpythonic.net>
[03:39:51] -!- jfire has quit [Quit: Leaving.]
[03:45:54] <linuxcnc-build> build #957 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/957 blamelist: Jeff Epler <jepler@unpythonic.net>
[04:09:14] -!- Tecan has quit [Read error: Connection reset by peer]
[04:10:05] -!- jfire has quit [Quit: Leaving.]
[04:11:51] -!- Tecan has quit [Changing host]
[04:17:59] -!- TheLarch [TheLarch!~Larch@unaffiliated/l84supper] has joined #linuxcnc-devel
[04:17:59] -!- TheLarch has quit [Client Quit]
[04:18:39] -!- TheLarch [TheLarch!~Larch@unaffiliated/l84supper] has joined #linuxcnc-devel
[04:18:52] -!- TheLarch has quit [Remote host closed the connection]
[04:19:04] -!- TheLarch [TheLarch!~Larch@adsl-75-57-158-233.dsl.emhril.sbcglobal.net] has joined #linuxcnc-devel
[04:19:04] -!- TheLarch has quit [Client Quit]
[04:19:32] -!- L84Supper has quit [Ping timeout: 258 seconds]
[04:20:14] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc-devel
[04:25:15] -!- krusty_ar has quit [Quit: No Ping reply in 180 seconds.]
[04:31:39] -!- Felix29 has quit []
[04:35:13] -!- jollis_ has quit [Remote host closed the connection]
[05:04:36] -!- mhaberler [mhaberler!~mhaberler@extern-186.stiwoll.mah.priv.at] has joined #linuxcnc-devel
[05:04:51] -!- dhoovie has quit [Read error: Connection reset by peer]
[05:06:59] -!- PetefromTn has quit [Remote host closed the connection]
[05:28:43] -!- dhoovie has quit [Read error: Connection reset by peer]
[05:31:41] -!- vladimirek [vladimirek!~vladimire@95.105.250.72] has joined #linuxcnc-devel
[05:31:59] -!- WrinkledCheese has quit [Read error: Connection reset by peer]
[05:40:25] -!- FinboySlick has quit [Quit: Leaving.]
[05:42:42] -!- vladimirek has quit [Remote host closed the connection]
[06:04:00] -!- cevad has quit [Ping timeout: 276 seconds]
[06:13:21] -!- linlin has quit [Ping timeout: 256 seconds]
[06:14:44] -!- linlin has quit [Excess Flood]
[06:14:55] -!- linlin has quit [Excess Flood]
[06:15:05] -!- linlin has quit [Excess Flood]
[06:15:19] -!- linlin has quit [Excess Flood]
[06:54:04] -!- Loetmichel has quit [Ping timeout: 256 seconds]
[06:57:46] -!- Simooon has quit [Read error: Operation timed out]
[07:27:38] -!- mhaberler has quit [Quit: mhaberler]
[07:29:52] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc-devel
[07:37:20] -!- emel has quit [Excess Flood]
[07:42:23] -!- emel has quit [Excess Flood]
[07:46:18] -!- Icekiller has quit [Ping timeout: 264 seconds]
[07:59:22] -!- Tecan has quit [Ping timeout: 256 seconds]
[07:59:42] -!- b_b has quit [Changing host]
[08:05:27] -!- Valen has quit [Quit: Leaving.]
[08:24:08] -!- |1li has quit [Read error: Connection reset by peer]
[09:02:54] -!- rob_h [rob_h!~rob_h@94.8.126.15] has joined #linuxcnc-devel
[09:41:04] -!- SadieD has quit [Quit: quit]
[09:50:17] -!- mhaberler has quit [Quit: mhaberler]
[09:54:36] -!- Icekiller has quit [Ping timeout: 272 seconds]
[10:10:44] -!- stsydow has quit [Read error: Connection reset by peer]
[10:15:26] -!- largecheesepuff has quit [Ping timeout: 245 seconds]
[10:21:57] -!- toastydeath has quit [Read error: Connection reset by peer]
[10:34:43] -!- skunkworks has quit [Remote host closed the connection]
[10:52:24] -!- Icekiller has quit [Ping timeout: 260 seconds]
[11:15:16] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc-devel
[11:34:05] -!- stsydow has quit [Remote host closed the connection]
[11:40:44] -!- zlog has quit [Remote host closed the connection]
[11:40:47] -!- Tom_itx has quit []
[11:47:28] -!- emel has quit [Excess Flood]
[11:53:22] <jepler> I eventually got a failure on that test that looked like this (different than on buildbot):
http://pastebin.com/raw.php?i=HWdFYWQ9
[11:56:18] -!- cncinator has quit [Ping timeout: 276 seconds]
[11:58:38] <jepler> seb_kuzminsky: do you know, is it always lucid-amd64-sim which sees the failure?
[12:00:57] -!- Simooon has quit [Quit: Leaving]
[12:01:08] -!- Felix29 [Felix29!Felix@c-71-193-105-131.hsd1.in.comcast.net] has joined #linuxcnc-devel
[12:09:00] -!- psha[work] [psha[work]!~psha@195.135.238.205] has joined #linuxcnc-devel
[12:11:38] dani is now known as Guest95844
[12:11:52] <jepler> (my different failure mode was seen on lucid-i386-sim)
[12:13:30] -!- dhoovie has quit [Read error: Connection reset by peer]
[12:15:50] <mhaberler> Jeff: lucid/amd64 didnt fail for me here, just bb
[12:16:02] -!- Icekiller has quit [Ping timeout: 252 seconds]
[12:17:32] -!- Valen has quit [Quit: Leaving.]
[12:17:44] -!- stsydow has quit [Remote host closed the connection]
[12:19:32] <mhaberler> these tests are bit annoying insofar as I cant tell if there's a bug in the code, or the test is shaky
[12:20:10] <mhaberler> Seb: if there is any chance.. try to get this to run on an embedded ARM board with a flash disk (slow) - widely varying results
[12:25:33] -!- morfic has quit [Ping timeout: 276 seconds]
[12:32:00] -!- ravenlock has quit [Quit: Leaving]
[12:33:22] -!- stsydow has quit [Remote host closed the connection]
[12:34:50] -!- skunkworks [skunkworks!~skunkwork@68-115-41-210.static.eucl.wi.charter.com] has joined #linuxcnc-devel
[12:42:36] Cylly is now known as Loetmichel
[12:46:49] -!- aitek2012 has quit [Read error: Connection reset by peer]
[12:49:32] -!- L84Supper has quit [Remote host closed the connection]
[12:51:56] -!- aitek2012 has quit [Ping timeout: 272 seconds]
[12:52:03] -!- L84Supper [L84Supper!~Larch@unaffiliated/l84supper] has joined #linuxcnc-devel
[12:52:28] <KGB-linuxcnc> 03git 05v2.5_branch 56a7604 06linuxcnc 10tests/ 10motion/g0/test.sh 10toolchanger/toolno-pocket-differ/shared-test.sh * tests: stop using telnet for good
[12:55:54] -!- AndChat|171201 has quit [Ping timeout: 264 seconds]
[12:57:42] -!- Felix29 has quit []
[13:00:10] -!- aitek2012 has quit [Read error: Connection reset by peer]
[13:12:13] <KGB-linuxcnc> 03jepler 05rtos-integration-preview3-merged-into-master 021d4bc 06linuxcnc 10share/axis/tcl/axis.tcl * axis: fix state of reload button
[13:12:13] <KGB-linuxcnc> 03seb 05rtos-integration-preview3-merged-into-master 58daef7 06linuxcnc 10src/emc/task/emctaskmain.cc * task: always allow coolant & lube control
[13:12:17] <KGB-linuxcnc> 03seb 05rtos-integration-preview3-merged-into-master 924a0f5 06linuxcnc 10src/emc/usr_intf/axis/scripts/axis.py * axis: always allow coolant and spindle control
[13:12:24] <KGB-linuxcnc> 03jepler 05rtos-integration-preview3-merged-into-master c047bcb 06linuxcnc 10share/axis/tcl/axis.tcl 10src/Makefile 10src/Makefile.modinc.in * Merge remote branch 'origin/v2.5_branch'
[13:12:32] <KGB-linuxcnc> 03seb 05rtos-integration-preview3-merged-into-master 8cb7ccb 06linuxcnc 10docs/man/man1/ 10halcmd.1 10halui.1 * docs: rebranding
[13:12:39] <KGB-linuxcnc> 03seb 05rtos-integration-preview3-merged-into-master 48fcae1 06linuxcnc 10docs/man/man1/halcmd.1 * docs: clarify usage of -I for halrun
[13:12:45] <KGB-linuxcnc> 03nieson 05rtos-integration-preview3-merged-into-master a5b4972 06linuxcnc 10configs/sim/gmoccapy/ 10(7 files in 2 dirs)
[13:12:49] <KGB-linuxcnc> gmoccapy_0_9_0 - bug fixed in key handlings, startup status and added many settings
[13:12:58] <KGB-linuxcnc> 03chris 05rtos-integration-preview3-merged-into-master e397dad 06linuxcnc 10src/Makefile * Work around etags.xemacs21 bug that mangles paths
[13:13:04] <KGB-linuxcnc> 03nieson 05rtos-integration-preview3-merged-into-master 6c2d6fb 06linuxcnc 10configs/sim/gmoccapy/ 10gmoccapy_handler.py 10release_notes.txt * gmoccapy_0_9_01 - fixed a bug in keyhandling mentioned by Chris
[13:13:12] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master 7e2e2d5 06linuxcnc 10src/rtapi/rtapi_time.c * rtapi_time.c: remove spurious warning
[13:13:19] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master 6a7b7e8 06linuxcnc
[13:13:22] <KGB-linuxcnc> Merge branch 'rtos-integration-preview3' into rtos-integration-preview3-merged-into-master
[13:13:31] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master f981340 06linuxcnc 10src/ 10(8 files) * interp/python: reduce compilation resource requirements for interpmodule.cc
[13:13:38] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master 1ccd057 06linuxcnc 10src/ 10Makefile.modinc.in 10emc/task/emctaskmain.cc
[13:13:42] <KGB-linuxcnc> Merge remote-tracking branch 'mah/master' into rtos-integration-preview3-merged-into-master
[13:13:51] <KGB-linuxcnc> 03jepler 05rtos-integration-preview3-merged-into-master 83e7df4 06linuxcnc 10src/libnml/nml/nml.cc * Fix write past end of buffer
[13:13:57] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master 56a7604 06linuxcnc 10tests/ 10motion/g0/test.sh 10toolchanger/toolno-pocket-differ/shared-test.sh * tests: stop using telnet for good
[13:14:05] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master ff6f04b 06linuxcnc 10src/Makefile * Merge remote-tracking branch 'origin/v2.5_branch' into rtos-integration-preview3
[13:14:12] <KGB-linuxcnc> 03git 05rtos-integration-preview3-merged-into-master 17b5d46 06linuxcnc 10docs/man/man1/halcmd.1 10src/Makefile
[13:14:15] <KGB-linuxcnc> Merge branch 'rtos-integration-preview3' into rtos-integration-preview3-merged-into-master
[13:14:24] <KGB-linuxcnc> 03jepler 05rtos-integration-preview3 021d4bc 06linuxcnc 10share/axis/tcl/axis.tcl * axis: fix state of reload button
[13:14:31] <KGB-linuxcnc> 03seb 05rtos-integration-preview3 8cb7ccb 06linuxcnc 10docs/man/man1/ 10halcmd.1 10halui.1 * docs: rebranding
[13:14:37] <KGB-linuxcnc> 03seb 05rtos-integration-preview3 48fcae1 06linuxcnc 10docs/man/man1/halcmd.1 * docs: clarify usage of -I for halrun
[13:14:44] <KGB-linuxcnc> 03chris 05rtos-integration-preview3 e397dad 06linuxcnc 10src/Makefile * Work around etags.xemacs21 bug that mangles paths
[13:14:50] <KGB-linuxcnc> 03git 05rtos-integration-preview3 7e2e2d5 06linuxcnc 10src/rtapi/rtapi_time.c * rtapi_time.c: remove spurious warning
[13:14:57] <KGB-linuxcnc> 03jepler 05rtos-integration-preview3 83e7df4 06linuxcnc 10src/libnml/nml/nml.cc * Fix write past end of buffer
[13:15:03] <KGB-linuxcnc> 03git 05rtos-integration-preview3 56a7604 06linuxcnc 10tests/ 10motion/g0/test.sh 10toolchanger/toolno-pocket-differ/shared-test.sh * tests: stop using telnet for good
[13:15:10] <KGB-linuxcnc> 03git 05rtos-integration-preview3 ff6f04b 06linuxcnc 10src/Makefile * Merge remote-tracking branch 'origin/v2.5_branch' into rtos-integration-preview3
[13:18:59] <mhaberler> well 56a7604 makes a bit of a difference.. before that it was assumed that _both_ netcat and telnet are installed.
[13:19:51] <mhaberler> Also it were good if these tests could be prevented from keeling over by a DISPLAY variable or /tmp/linuxcnc.lck hanging around
[13:24:56] <mhaberler> I really suggest we should start thinking about an alternative or improvements to runtests which give more forensic value - searching bugs based on failed runtests is a hit-and-miss game, you cant even tell if the unit under test failed or the test proper keeled over for some reason - example: hangs ;)
[13:28:07] -!- morfic has quit [Ping timeout: 246 seconds]
[13:32:35] -!- aitek2012 has quit [Ping timeout: 255 seconds]
[13:34:04] <linuxcnc-build> build #961 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/961 blamelist: Michael Haberler <git@mah.priv.at>
[13:34:54] -!- Guest95844 has quit [Quit: Page closed]
[13:37:13] -!- aitek2012 has quit [Read error: Connection reset by peer]
[13:38:32] -!- cncinator has quit [Ping timeout: 252 seconds]
[13:39:20] -!- AndChat|171201 has quit [Ping timeout: 255 seconds]
[13:45:45] -!- tmcw has quit [Remote host closed the connection]
[13:50:56] <linuxcnc-build> build #961 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/961 blamelist: Michael Haberler <git@mah.priv.at>
[13:53:07] <linuxcnc-build> build #963 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/963 blamelist: Michael Haberler <git@mah.priv.at>
[13:55:24] <linuxcnc-build> build #161 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/161 blamelist: Michael Haberler <git@mah.priv.at>
[13:57:46] <linuxcnc-build> build #963 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/963 blamelist: Michael Haberler <git@mah.priv.at>
[13:59:44] <linuxcnc-build> build #959 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/959 blamelist: Michael Haberler <git@mah.priv.at>
[14:01:48] <linuxcnc-build> build #960 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/960 blamelist: Michael Haberler <git@mah.priv.at>
[14:01:59] <linuxcnc-build> build #962 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/962 blamelist: Michael Haberler <git@mah.priv.at>
[14:03:09] <linuxcnc-build> build #960 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/960 blamelist: Michael Haberler <git@mah.priv.at>
[14:03:10] <linuxcnc-build> build #958 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/958 blamelist: Michael Haberler <git@mah.priv.at>
[14:14:44] <jepler> test.sh: line 23: echo: write error: Broken pipe
[14:15:29] <jepler> it's that same darned test. this answers my question about whether it's only lucid-amd64-sim, I guess; it's different on all three of those axes
[14:16:15] <jepler> mhaberler: in v2.5_branch, runtests does unset DISPLAY so that should not be able to affect test outcomes
[14:16:49] <mhaberler> oh, ok, then I have that rolled forward already into my branches - thanks!
[14:17:31] -!- stsydow has quit [Ping timeout: 245 seconds]
[14:24:29] <KGB-linuxcnc> 03jepler 05v2.5_branch 0cc034c 06linuxcnc 10scripts/runtests * runtests: Don't start if linuxcnc or hal is already running
[14:24:29] <KGB-linuxcnc> 03jepler 05v2.5_branch c7c1bf0 06linuxcnc 03tests/linuxcncrsh/skip * tests/linuxcncrsh: skip this test until we know what's up
[14:24:49] <jepler> mhaberler: the tests I added are sure to need tweaking for multiple-realtime / multiple-linuxcnc setups like you are investigating
[14:26:39] <mhaberler> there are lot of dark corners which need attention.. for instance linuxcnc.sh proper takes down all instances atm; but I would think eventually this will be mainly a HAL/RTAPI backend affair on a separte RT outboard, so I dont go through all these yet as I'm not there yet
[14:27:24] <mhaberler> btw the multiple HAL namespace thing is getting close: halcmd attach foo 23; halcmd net foo:signame comp.pin'
[14:28:16] <mhaberler> it's a bit tricky wrt to the attach/detach logic of HAL segments for remote instances with userland comps (RT is harmless, all in one process)
[14:28:53] <KGB-linuxcnc> 03seb 05master 8cb7ccb 06linuxcnc 10docs/man/man1/ 10halcmd.1 10halui.1 * docs: rebranding
[14:28:53] <KGB-linuxcnc> 03seb 05master 48fcae1 06linuxcnc 10docs/man/man1/halcmd.1 * docs: clarify usage of -I for halrun
[14:28:55] <KGB-linuxcnc> 03chris 05master e397dad 06linuxcnc 10src/Makefile * Work around etags.xemacs21 bug that mangles paths
[14:29:01] <KGB-linuxcnc> 03jepler 05master 83e7df4 06linuxcnc 10src/libnml/nml/nml.cc * Fix write past end of buffer
[14:29:07] <KGB-linuxcnc> 03git 05master 56a7604 06linuxcnc 10tests/ 10motion/g0/test.sh 10toolchanger/toolno-pocket-differ/shared-test.sh * tests: stop using telnet for good
[14:29:14] <KGB-linuxcnc> 03jepler 05master 0cc034c 06linuxcnc 10scripts/runtests * runtests: Don't start if linuxcnc or hal is already running
[14:29:20] <KGB-linuxcnc> 03jepler 05master c7c1bf0 06linuxcnc 03tests/linuxcncrsh/skip * tests/linuxcncrsh: skip this test until we know what's up
[14:29:27] <KGB-linuxcnc> 03jepler 05master e3a7438 06linuxcnc 10docs/man/man1/halcmd.1 10src/Makefile * Merge remote branch 'origin/v2.5_branch'
[14:29:55] <mhaberler> ah.. 'skip'.. that'd be my friend
[14:30:14] <jepler> yeah
[14:30:55] <jepler> I have mixed feelings about putting that skip file in git because it will also stop anybody from looking into the failure
[14:36:28] -!- Icekiller has quit [Ping timeout: 256 seconds]
[14:46:30] <mhaberler> Black BeagleBoard: available at $45:
http://beagleboard.org/Products/BeagleBone%20Black ,
http://www.newark.com/jsp/bespoke/bespoke7.jsp?bespokepage=newark/en_US/landing/beaglebone/beaglebone.jsp
[14:46:48] <jepler> I have a beagleboard in the basement
[14:47:00] <jepler> I should bring it to fest and give it away to someone who is interested
[14:47:02] -!- Tecan has quit [Remote host closed the connection]
[14:49:04] <mhaberler> hey, give the arm335x-hal-pru-module branch in my repo a spin, that redefines software steppers as we know them
[14:50:01] <mhaberler> actually I think the SD image I'm preparing might run on the old BeagleBoard too; would you give that a try when I'm done?
[14:50:11] <jepler> I don't have a dev environment set up for the beagleboard.. it's also the old rev with intensely flaky usb, and I haven't tried the internet's "try soldering in more caps" solution yet
[14:50:33] <mhaberler> ah, an even revision number then ;)
[14:51:25] <jepler> I have no time for flaky hardware
[14:52:38] <jepler> so maybe I shouldn't curse anybody with my board after all
[14:53:12] <mhaberler> hm, thats a pity; the beaglebone is pretty stable and surprise-free by now
[14:53:27] <mhaberler> (modulo certain runtest, that is )
[14:54:06] <linuxcnc-build> build #962 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/962 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner
[14:54:06] <linuxcnc-build> <nieson@web.de>
[14:55:33] * jepler scowls
[14:57:15] <linuxcnc-build> build #964 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/964 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner
[14:57:15] <linuxcnc-build> <nieson@web.de>
[14:57:41] -!- ravenlock has quit [Ping timeout: 248 seconds]
[14:58:36] <linuxcnc-build> build #162 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/162 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert
[14:58:36] <linuxcnc-build> Schechner <nieson@web.de>
[14:58:38] <jepler> anyway, looking at
http://elinux.org/BeagleBoard#Revision_C2 I think I have a beagleboard rev c2 or c3 but not 100% sure.
[15:00:09] <jepler> so I probably should try the trick of piggybacking a second cap over C97
http://www.linusakesson.net/hardware/beagleboard/ehci.php
[15:03:21] <jepler> ugh in 2012/2013 people still report similar problems on beagleboard xm?
[15:03:41] <cradek> I have one of those too
[15:03:51] <linuxcnc-build> build #962 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/962 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:04:05] <cradek> also with flaky usb problems
[15:04:32] <linuxcnc-build> build #960 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/960 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:06:11] <linuxcnc-build> build #961 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/961 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner
[15:06:11] <linuxcnc-build> <nieson@web.de>
[15:10:27] -!- erictheise has quit [Quit: erictheise]
[15:16:30] -!- olafveerman has quit [Quit: Konversation terminated!]
[15:18:52] <linuxcnc-build> build #964 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/964 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:21:12] -!- stsydow has quit [Remote host closed the connection]
[15:22:26] <linuxcnc-build> build #961 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/961 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner
[15:22:26] <linuxcnc-build> <nieson@web.de>
[15:23:21] <linuxcnc-build> build #61 of precise-x86-rtpreempt-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-x86-rtpreempt-rip/builds/61 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>,
[15:23:21] <linuxcnc-build> Norbert Schechner <nieson@web.de>
[15:23:28] <linuxcnc-build> build #45 of precise-amd64-rtpreempt-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-rtpreempt-rip/builds/45 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek
[15:23:28] <linuxcnc-build> <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:26:21] <linuxcnc-build> build #45 of precise-amd64-xenomai-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-xenomai-rip/builds/45 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>,
[15:26:21] <linuxcnc-build> Norbert Schechner <nieson@web.de>
[15:27:27] -!- capricorn_1 has quit [Quit: Konversation terminated!]
[15:29:32] <linuxcnc-build> build #71 of precise-x86-xenomai-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-x86-xenomai-rip/builds/71 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>,
[15:29:32] <linuxcnc-build> Norbert Schechner <nieson@web.de>
[15:30:31] <linuxcnc-build> build #963 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/963 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:30:32] <linuxcnc-build> build #959 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/959 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>
[15:35:45] -!- Tecan has quit [Changing host]
[15:36:24] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 20.0/20130329043827]]
[15:43:30] -!- ve7it [ve7it!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[15:47:10] -!- psha[work] has quit [Quit: Lost terminal]
[15:48:10] -!- stsydow has quit [Remote host closed the connection]
[15:50:36] -!- mhaberler has quit [Quit: mhaberler]
[16:11:24] <linuxcnc-build> build #62 of precise-x86-rtpreempt-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-x86-rtpreempt-rip/builds/62 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:12:28] <zultron> Bring those beagle boards to Wichita, if the thought of fixing them still causes groans at that point.
[16:13:23] <linuxcnc-build> build #963 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/963 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:14:49] <linuxcnc-build> build #965 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/965 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:15:27] <linuxcnc-build> build #46 of precise-amd64-rtpreempt-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-rtpreempt-rip/builds/46 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek
[16:15:27] <linuxcnc-build> <chris@timeguy.com>
[16:17:31] <linuxcnc-build> build #46 of precise-amd64-xenomai-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-xenomai-rip/builds/46 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:19:38] <zultron> Link to IRC logs is outdated here:
http://www.linuxcnc.org/index.php/english/community
[16:20:50] <linuxcnc-build> build #961 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/961 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:21:54] <linuxcnc-build> build #72 of precise-x86-xenomai-rip is complete: Failure [4failed apt-get-update runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-x86-xenomai-rip/builds/72 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:22:34] <linuxcnc-build> build #963 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/963 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:30:21] -!- andypugh [andypugh!~andy2@cpc16-basl9-2-0-cust685.20-1.cable.virginmedia.com] has joined #linuxcnc-devel
[16:30:35] -!- wboykinm has quit [Remote host closed the connection]
[16:32:16] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc-devel
[16:32:19] -!- mackerski has quit [Quit: mackerski]
[16:33:52] <linuxcnc-build> build #163 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/163 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:38:22] <linuxcnc-build> build #962 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/962 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:44:19] <linuxcnc-build> build #965 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/965 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:44:49] <linuxcnc-build> build #962 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/962 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:45:45] <linuxcnc-build> build #964 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/964 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:45:46] <linuxcnc-build> build #960 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/960 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Chris Radek <chris@timeguy.com>
[16:45:52] <cradek> good grief
[16:53:42] -!- dway has quit [Quit: NOOOOOOooooooooo……]
[17:04:07] -!- kmrhb has quit [Ping timeout: 264 seconds]
[17:18:33] <linuxcnc-build> build #964 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/964 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:18:51] <linuxcnc-build> build #966 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/966 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:20:16] <linuxcnc-build> build #164 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/164 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:24:11] <linuxcnc-build> build #966 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/966 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:25:20] <linuxcnc-build> build #962 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/962 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:25:28] <linuxcnc-build> build #963 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/963 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:27:10] <linuxcnc-build> build #964 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/964 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:27:13] <linuxcnc-build> build #965 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/965 blamelist: Jeff Epler <jepler@unpythonic.net>
[17:27:55] -!- hardwire has quit [Ping timeout: 252 seconds]
[17:28:39] -!- cradek has quit [Ping timeout: 252 seconds]
[17:28:43] -!- jfire has quit [Read error: Connection reset by peer]
[17:31:35] -!- cradek [cradek!~chris@outpost.timeguy.com] has joined #linuxcnc-devel
[17:37:16] -!- tmcw has quit [Remote host closed the connection]
[17:45:54] <seb_kuzminsky> looks like an earlier build had test failures, which left the /tmp/linuxcnc.lock file behind, and now with c7c1bf09 it's refusing to run the tests
[17:46:46] -!- psha [psha!~psha@213.208.162.67] has joined #linuxcnc-devel
[17:46:46] <seb_kuzminsky> if we're going to use the lock file for real, it should probably contain the pid of a crucial, central process (task? linuxcncsvr?) so we can detect if it's stale
[17:48:46] <seb_kuzminsky> err, not that commit, it's 0cc034c6e, the one that adds lockfile checking to runtests
[17:49:48] <mhaberler> yes, it should contain a pid of something that is definitely there, like milltask
[17:55:05] <KGB-linuxcnc> 03seb 05master 4c403fa 06linuxcnc 10scripts/runtests * Revert "runtests: Don't start if linuxcnc or hal is already running"
[17:55:06] <KGB-linuxcnc> 03seb 05master 258efd8 06linuxcnc * Merge branch 'v2.5_branch'
[17:55:08] <KGB-linuxcnc> 03seb 05v2.5_branch 4c403fa 06linuxcnc 10scripts/runtests * Revert "runtests: Don't start if linuxcnc or hal is already running"
[17:59:17] <mhaberler> let me know when you have them stable.. meanwhile it's quite a few branches I need to roll forward
[18:01:37] <seb_kuzminsky> sure
[18:01:45] <seb_kuzminsky> how's the rtos cleanup coming?
[18:05:41] <linuxcnc-build> build #963 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/963 blamelist: Jeff Epler <jepler@unpythonic.net>
[18:05:42] <linuxcnc-build> build #961 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/961 blamelist: Jeff Epler <jepler@unpythonic.net>
[18:13:35] -!- gimpswork has quit [Ping timeout: 256 seconds]
[18:14:30] <seb_kuzminsky> that should be the last build failure with the bogus lockfile detection
[18:17:12] <jepler> blah. but I even tested it 1 times before pushing!
[18:19:31] <seb_kuzminsky> it's a good test, it's just that our lockfile is inadequate (and validating it is trickier than just "[ -e")
[18:20:35] <seb_kuzminsky> we need something like "test -e $LOCKFILE && kill -0 $(cat $LOCKFILE)"
[18:20:44] <seb_kuzminsky> and the linuxcnc script should put its (?) pid in the lockfile
[18:20:57] <seb_kuzminsky> i guess
[18:21:28] <seb_kuzminsky> mhaberler, this will affect the "multiple instances of linuxcnc" thingy you're working on, do you have any input on this?
[18:22:22] <mhaberler> the way I will address this is by modifying argv[] - they get a :<instance id> suffix
[18:22:47] <mhaberler> have a peek at realime, which you can call like so: 'INSTANCE=12 realtime start'
[18:22:59] <mhaberler> hold on, need to push
[18:23:38] <seb_kuzminsky> no, i'm talking about the mutual exclusion that the lockfile provides (or attempts to)
[18:24:41] <mhaberler> well that should have an instance ID too eventually
[18:24:47] <mhaberler> see here for realtime:
http://git.mah.priv.at/gitweb?p=emc2-dev.git;a=blob;f=scripts/realtime.in;h=c7ceea9b5791af27f8fd286a281c1dd7c7a29200;hb=dea78935a27212ac166472324a9ae32f3ceabe50
[18:25:09] -!- L33TG33KG34R has quit [Ping timeout: 248 seconds]
[18:25:31] <mhaberler> the pid can be _in_ the file, but the instance must be discernible from the name (or 'pidof foo:12` result)
[18:33:41] -!- krusty_ar has quit [Remote host closed the connection]
[18:36:44] -!- syyl_ws has quit [Quit: Verlassend]
[18:47:28] <linuxcnc-build> build #965 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/965 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[18:48:48] <linuxcnc-build> build #967 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/967 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[18:55:17] <linuxcnc-build> build #963 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/963 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[18:58:10] <linuxcnc-build> build #965 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/965 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:06:35] -!- kmrhb has quit [Ping timeout: 260 seconds]
[19:07:08] <linuxcnc-build> build #165 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/165 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:13:14] -!- cradek has quit [Changing host]
[19:13:14] -!- cradek [cradek!~chris@emc/board-of-directors/cradek] has joined #linuxcnc-devel
[19:13:14] -!- mode/#linuxcnc-devel [+v cradek] by ChanServ
[19:15:49] <linuxcnc-build> build #964 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/964 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:20:48] -!- ve7it has quit [Ping timeout: 272 seconds]
[19:22:32] <linuxcnc-build> build #967 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/967 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:23:11] <linuxcnc-build> build #966 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/966 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:23:52] -!- frallzor has quit []
[19:24:37] -!- ve7it [ve7it!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[19:37:07] -!- kmrhb has quit [Ping timeout: 264 seconds]
[19:54:17] <linuxcnc-build> build #964 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/964 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:54:17] <linuxcnc-build> build #962 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/962 blamelist: Chris Radek <chris@timeguy.com>, Sebastian Kuzminsky <seb@highlab.com>, Michael Haberler <git@mah.priv.at>, Jeff Epler <jepler@unpythonic.net>
[19:56:08] -!- fllr has quit [Quit: leaving]
[19:59:11] -!- Icekiller has quit [Ping timeout: 256 seconds]
[20:02:24] <seb_kuzminsky> feck
[20:02:35] <seb_kuzminsky> i'll look at the runtest failures this evening if no one beats me to it
[20:05:47] <cradek> I don't predict a race
[20:05:52] -!- motioncontrol has quit [Ping timeout: 260 seconds]
[20:06:01] -!- skunkworks has quit [Read error: Connection reset by peer]
[20:06:52] -!- psha has quit [Quit: Lost terminal]
[20:14:58] <seb_kuzminsky> yeah me neither
[20:16:11] -!- kmrhb has quit [Ping timeout: 252 seconds]
[20:17:54] -!- PetefromTn has quit [Remote host closed the connection]
[20:26:17] -!- motioncontrol has quit [Read error: Connection reset by peer]
[20:26:54] <linuxcnc-build> build #968 of precise-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/968 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:27:07] <linuxcnc-build> build #966 of precise-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-sim/builds/966 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:35:09] <linuxcnc-build> build #966 of lucid-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-amd64-sim/builds/966 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:35:44] <linuxcnc-build> build #964 of lucid-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-sim/builds/964 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:43:59] -!- skunkworks [skunkworks!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc-devel
[20:45:38] <mhaberler> "with breathless anticipation, the crowd awaits the unveiling of the revamped tests:"
http://mah.priv.at/zenphoto/index.php?album=diesdas/album36&image=obama.jpg
[20:47:42] <linuxcnc-build> build #166 of precise-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/precise-i386-realtime-rip/builds/166 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:49:06] -!- pjm_ has quit [Read error: Connection reset by peer]
[20:49:18] <jepler> the tests passed at
http://buildbot.linuxcnc.org/buildbot/builders/precise-amd64-sim/builds/962 but are failing now
[20:49:32] <jepler> is it something left running on those buildbots, an old linuxcnc session or something?
[20:50:34] <jepler> ugh and sigh
[20:52:00] -!- mhaberler has quit [Ping timeout: 272 seconds]
[20:54:52] <linuxcnc-build> build #965 of hardy-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-realtime-rip/builds/965 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:54:54] <linuxcnc-build> build #968 of hardy-amd64-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-amd64-sim/builds/968 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:55:44] -!- tandoori has quit [Read error: Connection reset by peer]
[20:57:11] -!- DJ9DJ has quit [Quit: bye]
[20:59:50] <linuxcnc-build> build #967 of hardy-i386-sim is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/hardy-i386-sim/builds/967 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[21:03:24] -!- ve7it has quit [Ping timeout: 272 seconds]
[21:07:26] -!- tjb1 has quit [Quit: tjb1]
[21:09:14] -!- ve7it [ve7it!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[21:14:24] -!- adb [adb!~IonMoldom@178.211.237.94] has joined #linuxcnc-devel
[21:15:07] -!- chillly has quit [Quit: Leaving]
[21:20:11] -!- syyl has quit [Quit: Leaving]
[21:21:17] -!- FinboySlick has quit [Quit: Leaving.]
[21:31:13] -!- odogono has quit [Read error: Connection reset by peer]
[21:40:16] -!- toudi_ [toudi_!~toudi@efl147.neoplus.adsl.tpnet.pl] has joined #linuxcnc-devel
[21:40:51] toudi_ is now known as micges
[21:42:32] -!- Tecan has quit [Ping timeout: 252 seconds]
[21:46:45] -!- kmrhb has quit [Ping timeout: 252 seconds]
[21:59:38] -!- LawrenceG [LawrenceG!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[21:59:50] -!- zzolo has quit [Quit: zzolo]
[22:01:36] -!- LawrenceG has quit [Remote host closed the connection]
[22:01:42] -!- ve7it has quit [Read error: Operation timed out]
[22:01:47] -!- bedah has quit [Quit: Ex-Chat]
[22:04:22] -!- ve7it [ve7it!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[22:04:57] -!- Tecan has quit [Remote host closed the connection]
[22:06:29] <linuxcnc-build> build #965 of lucid-i386-realtime-rip is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/lucid-i386-realtime-rip/builds/965 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[22:06:29] <linuxcnc-build> build #963 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/963 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[22:07:11] -!- sparr has quit [Ping timeout: 260 seconds]
[22:08:22] -!- odogono has quit [Quit: odogono]
[22:16:15] -!- wboykinm has quit [Remote host closed the connection]
[22:17:01] -!- L33TG33KG34R has quit [*.net *.split]
[22:17:02] -!- shurshur has quit [*.net *.split]
[22:17:02] -!- frysteev_ has quit [*.net *.split]
[22:17:02] -!- Tuipveus has quit [*.net *.split]
[22:17:02] -!- seb_kuzminsky has quit [*.net *.split]
[22:17:02] -!- jepler has quit [*.net *.split]
[22:17:03] -!- firephoto has quit [*.net *.split]
[22:17:03] -!- archivist has quit [*.net *.split]
[22:17:03] -!- TekniQue has quit [*.net *.split]
[22:17:03] -!- fragalot has quit [*.net *.split]
[22:17:03] -!- Joshsz has quit [*.net *.split]
[22:17:58] -!- seb_kuzminsky [seb_kuzminsky!~seb@184-96-187-180.hlrn.qwest.net] has joined #linuxcnc-devel
[22:17:58] -!- jepler [jepler!~jepler@emc/developer/pdpc.professional.jepler] has joined #linuxcnc-devel
[22:18:03] -!- kjn has quit [Quit: Quit]
[22:21:21] -!- tmcw has quit [Remote host closed the connection]
[22:25:00] -!- chopper79 has quit [Quit: Leaving.]
[22:32:37] -!- skorasaurus has quit [Ping timeout: 248 seconds]
[22:48:44] -!- kmrhb has quit [Ping timeout: 256 seconds]
[22:54:55] -!- erictheise has quit [Quit: erictheise]
[22:59:09] -!- Tecan has quit [Changing host]
[23:11:55] -!- L33TG33KG34R has quit [*.net *.split]
[23:11:55] -!- shurshur has quit [*.net *.split]
[23:11:55] -!- frysteev_ has quit [*.net *.split]
[23:11:55] -!- Tuipveus has quit [*.net *.split]
[23:11:55] -!- seb_kuzminsky has quit [*.net *.split]
[23:11:56] -!- jepler has quit [*.net *.split]
[23:11:56] -!- firephoto has quit [*.net *.split]
[23:11:56] -!- archivist has quit [*.net *.split]
[23:11:56] -!- TekniQue has quit [*.net *.split]
[23:11:56] -!- fragalot has quit [*.net *.split]
[23:11:57] -!- Joshsz has quit [*.net *.split]
[23:12:37] -!- seb_kuzminsky [seb_kuzminsky!~seb@184-96-187-180.hlrn.qwest.net] has joined #linuxcnc-devel
[23:12:37] -!- jepler [jepler!~jepler@emc/developer/pdpc.professional.jepler] has joined #linuxcnc-devel
[23:16:07] -!- Oceax has quit [Ping timeout: 264 seconds]
[23:17:55] -!- Icekiller has quit [Ping timeout: 264 seconds]
[23:20:29] -!- andypugh has quit [Quit: andypugh]
[23:27:01] -!- kmrhb has quit [Read error: Operation timed out]
[23:30:44] -!- Oceax has quit []
[23:34:31] -!- sparr has quit [Changing host]
[23:38:37] -!- rob_h has quit [Ping timeout: 256 seconds]
[23:39:11] -!- Tecan has quit [Remote host closed the connection]
[23:55:51] -!- Nick001-Shop has quit [Remote host closed the connection]
