EMC: 03seb 07TRUNK * 10emc2/src/hal/drivers/mesa-hostmot2/firmware/5i22/ (SV16.PIN SVST8_24.PIN SVST8_8.PIN): New .PIN files for 5i22, from Peter Wallace
remember me mentioning a fire near my house about a month ago? here are some pics: http://highlab.com/family/2009.01%20fire/index.html
EMC: 03seb 07TRUNK * 10emc2/src/Makefile: include a missing header file in emc2-dev.deb
EMC: 03alex_joni 07TRUNK * 10emc2/src/emc/usr_intf/halui.cc: fix SF #2607450, can't have more than 10 MDI commands in halui
EMC: 03alex_joni 07TRUNK * 10emc2/debian/changelog: mention bugfix
EMC: 03bigjohnt 07TRUNK * 10emc2/docs/src/drivers/hostmot2.lyx: change subsections to sections
hmm.. does emc2-sim run for you guys?
I've not tried it...
the sim tests are passing on the buildbot, but beyond that i dont know
it did recently. lemme rebuild and find out
any particular config or problem you're seeing?
19 failed here
it doesn't seem to load rtapi
hmm. what's the incantation to run the tests?
31 tests run, 30 successful, 0 failed + 1 expected
something is borked here
this is on Jaunty even :)
alex_joni: tighten the nut between the chair and the keyboard
let's not discuss alex's nuts, please
you're right, many teenagers read this channel
didn't run a full make clean
and it seems even building a new package didn't make clean
hmm. neither did I
(I had it configured for RT previously)
oh. I trued to build some packages here, but got an error
or RT packages?
what's the failure?
I was sort of following along your conversation with ehj
oh hmm. do you need to be running the RT kernel to build RT packages?
but you need to have the headers package installed
good. didn't think so
and you need to configure for the proper kernel
(that's from building emc2-sim on this laptop after a make clean)
ok, not sure I have all that set up right yet
this is on Jaunty alpha <whatever it would be now>
hmmm. actually, I can't work on that right now, but I'll pastebin the last bit of the build messages
[18:42:46] <SWPLinux> http://pastebin.ca/1340242
I'm sure it's something (things?) stupid that I missed
error code 65280?
yeah, whatever that means :)
SWPadnos: probably didn't rebuild control
or you didn't touch a file which you should have
my bet would be for debian/rules.d/0-common-vars.mk:all_custom_flavours = ...
you need to add rtaismp there
err.. rtaismp64 in your case
(then rebuild control.in and control, using debian/rules debian/control.in && debian/rules debian/control)
I have no debian/control.in
"debian/rules debian/control.in" builds it
the second part is the actual target for debian/rules
make: *** No rule to make target `debian/control.in'. Stop.
sorry.. it's control.stub
then check debian/control if it has rtaismp64 in it
argh. need kernel-wedge
maybe I missed installation of some helper metapackage
bet you didn't run apt-get build-dep linux-image-*
although kernel-wedge shouldn't be used
that's only used if you want to build d-i packages
(I see I have it installed..)
so maybe it's needed
kernel-wedge gen-control > debian/control
/bin/bash: kernel-wedge: command not found
make: *** [debian/control] Error 127
that was my clue :)
build-dep linux-image... only seemed to pull in gawk
after installing kernel-wedge, debian/rules<etc> worked. building now.
Build-Depends: debhelper (>= 3), module-init-tools, kernel-wedge (>= 2.24ubuntu1), gcc-4.1-hppa64 [hppa], binutils-hppa64 [hppa], device-tree-compiler [powerpc], gcc-4.1 [powerpc ia64], gawk [amd64 i386]
Build-Depends-Indep: xmlto, docbook-utils, gs, transfig, bzip2, sharutils
that's from debian/control (which you'll soon generate)
or you just did..
ok, so after ./build.sh, shouldn't there be packages somewhere?
one level up
though it did fail to sigh because I don't have your private key :)
are they there?
(sounds like a pretty fast machine you have :)
could be that I didn't build everything you guys are
dmesg | grep BOGOMIPS ?
it's only a dual-core A64
dmesg | grep BogoMIPS ?
steve@jauntyA3:/Project/rtai-smp$ grep bogo /proc/cpuinfo
Total of 2 processors activated (6922.15 BogoMIPS) - on this laptop
(still takes a bit longer to build ;)
yeah. this one was selected because it's low power
it's not even a super-fast hard drive, just some generic SATA2 320G seagate
this one's a great laptop.. the best one I've ever seen/had
runs about 5h
actually, that bogomips number is wrong. the CPU must have been in low power mode
on boot it's not in low power mode
[ 0.004000] Calibrating delay using timer specific routine.. 5022.87 BogoMIPS (lpj=10045748)
[ 0.380211] Total of 2 processors activated (10045.96 BogoMIPS).
that's more like it
that's more like it :)
this is a T5300 CPU
but I see the bogomips is the same even when the CPU runs at 800MHz instead of the 1.73GHz max
cool. I didn't realize that /proc/cpuinfo is actually dynamically recreated
I guess I could have guessed, since it's in /proc
steve@jauntyA3:/Project/rtai-smp$ grep bogo /proc/cpuinfo
that's what I get while compiling EMC2
EMC: 03alex_joni 07TRUNK * 10emc2/src/configure.in: install sample-configs according to Debian Policy to /usr/share/doc/emc2/examples/sample-configs/
EMC: 03alex_joni 07TRUNK * 10emc2/src/Makefile.inc.in: install sample-configs according to Debian Policy to /usr/share/doc/emc2/examples/sample-configs/
EMC: 03alex_joni 07TRUNK * 10emc2/src/Makefile: install sample-configs according to Debian Policy to /usr/share/doc/emc2/examples/sample-configs/
EMC: 03alex_joni 07TRUNK * 10emc2/src/configure: rebuild
EMC: 03alex_joni 07TRUNK * 10emc2/debian/emc2.files.in: install sample-configs according to Debian Policy to /usr/share/doc/emc2/examples/sample-configs/
EMC: 03alex_joni 07TRUNK * 10emc2/debian/rules.in: install sample-configs according to Debian Policy to /usr/share/doc/emc2/examples/sample-configs/
oh hmm. I now have kernel packages, but no emc packages
and no rtai/rtai modules either
sure you don't :)
you need to build those too :D
gonna have to fiddle with it a bit later though. bbiab (again)
EMC: 03alex_joni 07TRUNK * 10emc2/debian/changelog: note new install location for sample configs
a pyvcp spinbox would be nice which could export NIST style pins
2 pins for up/down, 1 input pin float for the value
EMC: 03alex_joni 07TRUNK * 10emc2/configs/halui_pyvcp/ (pyvcp.hal vcp.xml): make feed-override and spindle-override work
ok, this is strange
I just got an "excessive bounces" message about my subscription to emc-commit :?
yeah I see that too
and then I got an earlier commit message
lately I've seen sf blacklisting its own machines several times
yep, I noticed that conversation
what's strange is that I can't log to lists.sf.net in using my email address
SF mailing lists suck
EMC: 03alex_joni 07TRUNK * 10emc2/configs/halui_pyvcp/ (pyvcp.hal vcp.xml): add optional-stop and block-delete
SWPadnos: seems it's the same in your case
host mx.sourceforge.net [18.104.22.168]: 550-Your IP, 172.29.29.179 has been autoblocked because of abuse. Please email
that 172.29.29.179 sounds like a SF machine
ok, another internal blacklisting
want me to check the subscribe status?
nah, I laready re-enabled
there's a link to re-enable without logging in
I was going to look at other options, so I wanted to log in
looks fine from ehere
which I couldn't do on the lists.sourceforge.net machine using my email address (or username), but I was able to from sourceforge.net using my username
as long as I'm here, does anyone remember the bug report I was supposed to file?
OT: what's nomail reason [U] for the mailing list?
ah, jepler already fixed it. I'm saved :)
ah, [U] = user
ah. "U asked for it" :)
wow - roland has been thru a lot! Yecky
wow, I hope he heals up quick. that sucks.