#emc-devel | Logs for 2009-01-21

[03:01:37] <steve_stallings> steve_stallings is now known as steves_logging
[03:35:50] <cradek> jepler_: welcome
[04:01:50] <CIA-40> EMC: 03cradek 07TRUNK * 10emc2/src/hal/utils/halcmd.c: remove another instance of this warning
[04:19:30] <CIA-40> EMC: 03cradek 07TRUNK * 10emc2/src/emc/usr_intf/axis/scripts/axis.py: save block-delete and optional-stop settings across invocations
[13:15:15] <CIA-40> EMC: 03jepler 07TRUNK * 10emc2/share/axis/tcl/axis.tcl:
[13:15:15] <CIA-40> EMC: * add 'recent files' menu
[13:15:15] <CIA-40> EMC: * extend AxisPreferences so non-bool values can be stored and retrieved
[13:15:17] <CIA-40> EMC: 03jepler 07TRUNK * 10emc2/src/emc/usr_intf/axis/scripts/axis.py:
[13:15:17] <CIA-40> EMC: * add 'recent files' menu
[13:15:17] <CIA-40> EMC: * extend AxisPreferences so non-bool values can be stored and retrieved
[13:16:51] <micges_emc> jepler: cool
[13:17:23] <jepler_> bbl, work
[13:41:51] <jepler_> jepler_ has changed the topic to: EMC2 development -- http://linuxcnc.org/ | 2.3 schedule: February 1: no new features on trunk, only stabilization. | channel logged by logger_dev
[13:42:02] <jepler_> jepler_ is now known as jepler
[14:31:23] <jepler> cradek_: you were wanting non-bool items in AxisPreferences too, but I froget why
[14:31:28] <jepler> er, forget
[14:32:07] <cradek_> whee
[14:32:13] <cradek_> cradek_ is now known as cradek
[14:32:58] <cradek> it was for font sizes, which are no longer an issue
[14:33:04] <cradek> but, it will come in handy I bet.
[14:42:42] <jepler> if only somebody besides me can figure out how to use it
[15:11:08] <BigJohnT> cradek: http://powersports.honda.com/Assets/Models/2009_GoldWingAudioComfortNaviXMABS_2000x1275_MetallicBlue_42515B.jpg
[16:45:53] <cradek> BigJohnT: hope it gets warm again soon?
[16:53:09] <SWPadnos> there wwas a Gold Wing with a sidecar parked outside my friends house - made me wonder if there's a heater in there
[16:53:46] <archivist> real bikers dont need a heater
[16:53:59] <SWPadnos> real bikers are idiots if they bike here in the winter
[17:09:49] <skunkworks> SWPadnos: how close did you get?
[17:10:16] <SWPadnos> we weren't on the National Mall, but we were closer than they were :)
[17:10:26] <SWPadnos> about a block from the podium
[17:10:31] <skunkworks> cool
[17:10:34] <SWPadnos> yep
[17:10:53] <SWPadnos> we could hear some of the words, and we definitely heard/felt the cannons for the salute
[17:11:41] <SWPadnos> I heard Aretha Franklin singing and some of the speeches, but we mostly crowded around a couple of people who had brought radios and cellphones
[17:12:06] <skunkworks> we had mimosas and treats. :) it was fun.
[17:12:24] <SWPadnos> heh
[17:12:57] <SWPadnos> we were staying with a friend who lives <4 blocks from the capital (east side though)
[17:13:27] <SWPadnos> so we just went back afterwards and watched the tivo'ed footage and caught some of the parade
[17:13:38] <skunkworks> SWPadnos: this is interesting.. http://www.cnczone.com/forums/showthread.php?t=71869
[17:13:49] <skunkworks> neat
[17:17:33] <BigJohnT> cradek me too
[17:17:47] <skunkworks> exp the reply from marcus that says the a axis is differnt because of pinouts.
[17:18:10] <SWPadnos> yep, I remember that
[17:18:29] <BigJohnT> pick it up tomorrow... gonna trailer it home from Russelville AR
[17:18:30] <SWPadnos> he mentioned that there was a problem on the REV1-3 boards, fixed on REV4
[17:18:49] <CIA-41> EMC: 03tissf 07TRUNK * 10emc2/docs/src/examples/mpg_fr.lyx: french translation update
[17:18:50] <SWPadnos> and they had to do a pin swap in the A-axis unit because of it
[17:47:26] <CIA-41> EMC: 03tissf 07TRUNK * 10emc2/src/po/fr_axis.po: french translation update
[19:14:27] <CIA-41> EMC: 03flo-h 07TRUNK * 10emc2/src/emc/usr_intf/stepconf/stepconf.glade: added shortcuts on spindle page
[20:15:44] <cradek> jepler: recent files (neat!) needs to be disabled when open is disabled
[20:20:10] <jepler> cradek: good catch, thanks
[20:22:15] <jepler> (um, does File > Open deactivate?)
[20:22:21] <cradek> yes
[20:25:40] <jepler> revision 1.84
[20:25:41] <jepler> date: 2009/01/15 15:04:22; author: jepler; state: Exp; lines: +3 -2
[20:25:48] <jepler> I broke File > Open and > Quit disabling last week
[20:25:55] <cradek> oops
[20:26:04] <jepler> the toolbar "open" disabled still
[20:26:09] <cradek> I interrupted emc's startup and now can't run it (sim)
[20:26:30] <cradek> forget it
[20:26:36] <cradek> it mysteriously started working again
[20:27:57] <CIA-41> EMC: 03jepler 07TRUNK * 10emc2/share/axis/tcl/axis.tcl:
[20:27:57] <CIA-41> EMC: these menu items should disable at times
[20:27:57] <CIA-41> EMC: "Open" and "Quit" I broke with rev 1.84. "Recent Files" is a new addition.
[20:28:59] <cradek> wonder why 'max velocity' is occasionally zero at startup
[20:30:25] <cradek> repeatably now, in trunk/sim/axis
[20:43:43] <SWPadnos> is "max velocity" an output somewhere, or are you looking with a debugger?
[21:08:14] <cradek> the slider
[21:13:48] <alex_joni> good night all