Back
[00:07:00] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/socket_server.c: Change messages for consistency
[00:17:26] <skunkworks> jmkasunich:
http://imagebin.ca/view/RBqYRa.html
[00:17:44] <skunkworks> oops - I meant that to be in the other channel
[01:04:56] <cradek> jepler: whee, did you fix it already? that's great, thanks.
[01:20:23] <cradek> jepler: hmm, it's still goofy
[01:20:55] <cradek> mousing over the slider will send a message, also often changing the value
[01:24:45] <cradek> also, when I set the slider to 8in/min and then switch to mm, it displays 214mm/min (correct) but sends a message setting the vel to 214 (in/min)
[01:25:01] <cradek> (switch to mm = view/display mm)
[02:19:13] <CIA-38> EMC: 03seb 07TRUNK * 10emc2/src/hal/drivers/mesa-hostmot2/ (encoder.c pwmgen.c stepgen.c): add some missing sanity checks, should fix the crash Roberto found
[02:25:21] <jepler> cradek: hm, I didn't see the "mousing over" problem at all
[02:25:23] <jepler> cradek: are you on hardy too?
[02:25:33] <jepler> I'll look into the in/mm switch..
[02:27:20] <jepler> cradek: so in mm mode the message it sends is wrong?
[03:37:19] <CIA-38> EMC: 03seb 07v2_2_branch * 10emc2/src/hal/drivers/mesa-hostmot2/ (encoder.c pwmgen.c stepgen.c): merge the fix for the crash Roberto found from Trunk
[03:59:17] <cradek> jepler: I'm in dapper -- yes in mm mode, the message is wrong
[04:01:25] <jepler> cradek: was it right before?
[04:01:27] <jepler> the message
[04:01:53] <cradek> yes it's right as long as the display units match my machine's units (inch)
[04:02:11] <cradek> in mm display, it sends the mm value when it should be converting it back to inches
[04:02:22] <jepler> ok, so it has to send in inifile units
[04:02:33] <jepler> did I break that or was it wrong to begin with?
[04:02:40] <cradek> it was always wrong
[04:02:57] <cradek> the jog speed units must work correctly...
[04:02:57] <jepler> ok
[04:08:58] <CIA-38> EMC: 03jepler 07TRUNK * 10emc2/src/emc/usr_intf/axis/scripts/axis.py: well this is almost dandy, except that upon switching units the value goes wrong. ugh.
[04:19:43] <CIA-38> EMC: 03jepler 07TRUNK * 10emc2/src/emc/usr_intf/axis/scripts/axis.py: whoops, that's what I missed
[04:22:03] <cradek> heh
[04:22:16] <jepler> clearly it's too late for me to be programming
[04:22:57] <SWPadnos> it's too late, you already are :)
[04:23:23] <jepler> 'night
[04:23:32] <SWPadnos> see you
[04:23:34] <cradek> goodnight
[04:24:28] <cradek> aha
[04:24:32] <cradek> that's much better
[04:26:15] <cradek> thanks jeff!
[04:28:01] <jmkasunich> well I sure got a lot done tonight
[04:28:26] <jmkasunich> this alias thing is a lot more complex than I thought
[04:28:30] <SWPadnos> heh
[08:11:24] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/config_gtk.c: fix modbus i/o setup page to display properly and update after loading a new ladder program
[08:12:26] <CIA-38> EMC: 03compile-farm 07BDI-4.51 (2.6.16.20-rtai) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot6_log.txt
[08:12:27] <CIA-38> EMC: 03compile-farm 07Ubuntu 8.04 LTS (hardy) non-realtime (2.6.24-21-generic) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot3_log.txt
[08:12:30] <CIA-38> EMC: 03compile-farm 07Ubuntu 6.06 LTS (dapper) realtime (2.6.15-magma) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot7_log.txt
[08:12:52] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/protocol_modbus_master.c: add more defaultswhen intializing
[08:13:37] <CIA-38> EMC: 03compile-farm 07Ubuntu 8.04 LTS (hardy) non-realtime (2.6.24-21-generic) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot3_log.txt
[08:13:38] <CIA-38> EMC: 03compile-farm 07Ubuntu 6.06 LTS (dapper) realtime (2.6.15-magma) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot7_log.txt
[08:13:52] <CIA-38> EMC: 03compile-farm 07BDI-4.51 (2.6.16.20-rtai) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot6_log.txt
[08:14:30] <CIA-38> EMC: 03compile-farm 07Ubuntu 5.10 (breezy) realtime (2.6.12-magma) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot2_log.txt
[08:15:35] <CIA-38> EMC: 03compile-farm 07Ubuntu 6.06 LTS (dapper) non-realtime (2.6.15-52-386) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot8_log.txt
[08:16:19] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/ (classicladder.c classicladder.h):
[08:16:19] <CIA-38> EMC: redo the way classicladder loads ladder programs.modbus master and slave can be
[08:16:19] <CIA-38> EMC: loaded seperately. If you have already loaded a ladder program but specified a
[08:16:19] <CIA-38> EMC: program name again the new program will be loaded instead of being ignored
[08:16:27] <CIA-38> EMC: 03compile-farm 07Ubuntu 5.10 (breezy) non-realtime (2.6.12-10-386) * 10emc2head/: build FAILED ; see
http://linuxcnc.org/compile_farm/emc2head_slot1_log.txt
[08:17:43] <CIA-38> EMC: 03compile-farm 07Ubuntu 5.10 (breezy) non-realtime (2.6.12-10-386) * 10emc2head/: build PASSED
[08:19:43] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/ (6 files): assorted updates for modbus master
[08:20:10] <CIA-38> EMC: 03compile-farm 07Ubuntu 6.06 LTS (dapper) realtime (2.6.15-magma) * 10emc2head/: build PASSED
[08:21:03] <CIA-38> EMC: 03compile-farm 07Ubuntu 5.10 (breezy) realtime (2.6.12-magma) * 10emc2head/: build PASSED
[08:21:07] <CIA-38> EMC: 03compile-farm 07Ubuntu 8.04 LTS (hardy) non-realtime (2.6.24-21-generic) * 10emc2head/: build PASSED
[08:21:40] <CIA-38> EMC: 03compile-farm 07Ubuntu 6.06 LTS (dapper) non-realtime (2.6.15-52-386) * 10emc2head/: build PASSED
[08:21:42] <CIA-38> EMC: 03compile-farm 07BDI-4.51 (2.6.16.20-rtai) * 10emc2head/: build PASSED
[09:01:31] <CIA-38> EMC: 03cmorley 07TRUNK * 10emc2/src/hal/classicladder/config_gtk.c: re initialize the socket when the port or serial speed is changed
[21:43:41] <roberth_> hi guys, u may find this link usfull? some siemens CNC machine/user manuals,
http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&objid=32027214
[21:47:11] <roberth_> this link is to one about cycles which may be usfull,
http://support.automation.siemens.com/WW/view/en/22083222