#linuxcnc | Logs for 2012-02-11

Back
[00:03:12] -!- theorb [theorb!~theorb@91.84.53.6] has joined #linuxcnc
[00:04:57] -!- moriarty [moriarty!~golem@unaffiliated/moriarty] has joined #linuxcnc
[00:05:01] -!- moriarty [moriarty!~golem@unaffiliated/moriarty] has parted #linuxcnc
[00:05:01] -!- theorbtwo has quit [Ping timeout: 276 seconds]
[00:05:10] theorb is now known as theorbtwo
[00:07:06] <pfred1> JT-Shop but he made a video before he did http://www.youtube.com/watch?v=fHPKaHLzXes
[00:07:30] -!- Eartaker [Eartaker!~Eartaker@c-67-185-76-100.hsd1.wa.comcast.net] has joined #linuxcnc
[00:07:40] -!- Eartaker has quit [Changing host]
[00:07:40] -!- Eartaker [Eartaker!~Eartaker@unaffiliated/eartaker] has joined #linuxcnc
[00:08:00] <JT-Shop> clap, clap, clap they call him the "clapper"
[00:09:20] <Jymmm> *clap clap* CLAP ON....
[00:10:41] <JT-Shop> lol
[00:10:48] -!- Eartaker [Eartaker!~Eartaker@unaffiliated/eartaker] has parted #linuxcnc
[00:16:22] <JT-Shop> 1 1/2 rondel, large to go
[00:17:31] <JT-Shop> s/rondel/rondelle
[00:31:49] -!- jonnyATroot has quit [Ping timeout: 245 seconds]
[00:40:10] <JT-Shop> http://www.youtube.com/watch?v=9LjbMVXj0F8
[00:40:11] -!- rob_h has quit [Ping timeout: 252 seconds]
[00:46:31] <pfred1> check out this genius running his BOB on conductive bubble wrap http://www.youtube.com/watch?v=F_AVZIhVi9U
[00:47:20] <pfred1> I have to hand it to him it does appear to work for them
[00:48:40] -!- Loetmichel_ [Loetmichel_!cylly@p54B14951.dip.t-dialin.net] has joined #linuxcnc
[00:49:18] -!- Loetmichel has quit [Ping timeout: 265 seconds]
[00:54:19] -!- kb8wmc [kb8wmc!~chatzilla@nat.mtp.cmsinter.net] has joined #linuxcnc
[00:57:35] <pfred1> A Windows ad I'd like to see:
[00:57:37] <pfred1> Steve Ballmer holding up a copy of Windows 8 saying, So do you feel lucky punk? Well, do you? Did our coding team fix 6 bugs, or did we only fix 5? In all the excitement I kind of forgot myself ...
[01:00:25] -!- olson_ [olson_!~olson@ip24-254-219-64.hr.hr.cox.net] has joined #linuxcnc
[01:01:06] <olson_> Hello, I'm a newb struggling with EMC2 and a PCIe Parallel port.
[01:01:49] <olson_> I've got a NetMos 9901, and the IO Ports go disabled on my constantly
[01:02:21] <olson_> I've gotten stepconfig to drive my X and Y access for a few moments once before they went offline.
[01:02:35] <olson_> It's hooked up to a Sherline driver box and XY table.
[01:04:22] <pfred1> olson_ what does this command say lsmod | grep parport
[01:09:33] <olson_> At initall boot it shows nothing
[01:10:06] <olson_> I can load parport_pc io=0x3010 irq=3 and it will pick up the card
[01:10:37] <pfred1> olson_ I don't think EMC uses the parport driver so nothing is good
[01:10:39] <olson_> I am fresh booting now so I can confirm that. :)
[01:11:09] <olson_> I've read that you can use it and specify your port using in the hal config by index number.
[01:11:32] <olson_> But doing that and firing up the mini interface geets me an instant lock up
[01:12:27] <pfred1> I don't use it here and it works for me
[01:12:59] <pfred1> I just put the io port into stepconf and let RTAI handle it
[01:13:51] <pfred1> olson_ sometimes if I run into a problem on my system I will examine /var/log/syslog for some clues as to what is going on and how i might fix it
[01:14:07] <olson_> I do see parport, but not parport_pc
[01:14:30] <pfred1> let me check on my cnc box it works
[01:16:02] <olson_> Huh, ports show enabled after that reboot.
[01:16:12] <olson_> This thing is so nondeterministicv
[01:16:22] <olson_> Or I so don't understand what I'm doing
[01:17:29] <pfred1> actually i get something called hal_parort when I am running
[01:17:41] <pfred1> hal_parport even
[01:18:40] <olson_> Well, I'm using the Sherline load, loadrt hal_parport cfg="0x3010" in my standrad_pinout.hal
[01:19:12] <olson_> My lspci -vv is at http://pastebin.com/CTJ5Bdx9
[01:19:21] <olson_> (Just the Parallel part)
[01:19:38] <olson_> Let me try step config and see what happens this time.
[01:19:41] <pfred1> your system does not have a built in port?
[01:19:55] <olson_> Alas no
[01:20:00] <olson_> And it's only PCIe
[01:20:36] <olson_> The machine is a Dell Optiplex 390, EMC2 booting off of a USB Drive
[01:22:34] <pfred1> this is what mine looks like before I run RTAI then after http://pastebin.com/a9S4fZrr
[01:23:13] <olson_> Okay I fired up stepconf, set the address to 0x3010, Sherline Driver type and pin out.
[01:23:17] <pfred1> mine works good
[01:23:51] <olson_> Select test axis for the X axis, and the stepper twitches for a sec, then both I/O ports show up as disabled immediately afterwards
[01:24:09] -!- maximilian_h has quit [Ping timeout: 252 seconds]
[01:24:43] <olson_> Yeah, I don't see that hal_parport afterwards
[01:25:07] <olson_> Just the lone parport module.
[01:26:00] <pfred1> so you've 2 ports on your card one at 0x3010 and another at 0x3000
[01:26:33] <olson_> Before trying stepconf I can load the parport_pc module and it works, afterwards it appear to be locked out as well.
[01:26:37] <pfred1> and you say it has worked so I can only assume you've found the right one but you say you're not getting hal_parport to load
[01:26:39] <olson_> It's a single port card
[01:26:56] <pfred1> well it has 2 ports
[01:27:09] <olson_> I'm not sure what the extra IO Port range is for, but it appears to be common for PCI/PCIe Parallel ports to have multiple ranges with several unused
[01:27:12] <pfred1> says so right in your lspci
[01:27:35] <olson_> I understand the 9901 has a proprietary chip chaining system so it may be for that.
[01:29:07] <olson_> The chipset could support up to two serial ports as well, so it might also have been for those.
[01:29:19] <olson_> Havn't gotten far enough through the dataheet to tell
[01:37:52] <pfred1> this is what mine looks like http://pastebin.com/cvvdiUDa
[01:39:47] -!- maximilian_h [maximilian_h!~bonsai@anon-188-22.vpn.ipredator.se] has joined #linuxcnc
[01:40:45] <pfred1> olson_ what does dmesg say when you try to run your RTAI?
[01:42:08] <pfred1> olson_ mine looks like this http://pastebin.com/Ztn3xfyq
[01:45:55] <olson_> It looks pretty similar, I don't see anything specificly about the parallel card in either.
[01:46:29] <olson_> Of course, most of the time mine crashes (complete hand or Keyboard/Mouse unresponsive) if the card isn't disabled.
[01:46:54] <pfred1> olson_ just X or the whole system?
[01:47:29] <pfred1> I guess if the keyboard locks up it is hard to tell
[01:47:39] <olson_> Indeed
[01:47:51] <pfred1> not impossible though that is what syslog if for
[01:47:57] <pfred1> is for even
[01:48:34] <olson_> True, but I have to hard reset it and thats somewhat difficult to distinguish from a hard hang.
[01:49:34] <pfred1> syslog is persistant between reboots
[01:49:58] <olson_> Yeah, but the logs just suddenly quit
[01:50:08] <olson_> Nothing about any last minute failures
[01:50:45] <olson_> Trying it from a remote X session
[01:51:27] <olson_> Hmm, I beleive I can confirm the system is unhappy
[01:51:55] <olson_> Although.. It isn't locked up
[01:52:02] <pfred1> olson_ but you say it has worked?
[01:52:10] <olson_> When it goes bad it seems like drive access if toast.
[01:52:18] <olson_> Not with the card enabled
[01:52:23] <olson_> Only stepconf
[01:52:28] <pfred1> OK lets forget the card for a moment and check something else out
[01:52:30] <olson_> Which I beleive doesn't go into RT mode
[01:52:51] <olson_> Ouch!
[01:52:57] <pfred1> you've checked your base period latency haven't you?
[01:52:59] <olson_> cd / ; ls
[01:53:15] <olson_> bash: /bin/ls: No such file or directory
[01:53:27] <pfred1> having it set wrong can lead to some unfortunate events
[01:53:34] <olson_> I did a latency test at once point early on.
[01:54:08] <olson_> Hmmm, well I never set it
[01:54:11] <pfred1> often while debugging it is standard practice to raise up your time to see if it helps you any
[01:54:30] <olson_> The Sherline guide I started from just told me to use their prebuild config
[01:54:42] <pfred1> well they didn't give you a PC
[01:54:45] <olson_> unfortunate - drive control broke
[01:54:52] <olson_> or unfortunate - hard drive vanishes?
[01:57:08] <olson_> I'm thinking that a USB boot drive is maybe bad mojo with emc2
[01:58:13] <pfred1> it may be I never tried it myself with EMC I have wiht other Linux distros though
[01:58:30] <olson_> It works right up until I run the emc command
[01:58:44] <olson_> Maybe the RT mode no likely USB disk....
[01:59:16] <pfred1> once the RTAI module loads things do happen
[01:59:26] <pfred1> that don't happen when it isn't loaded
[01:59:44] <pfred1> I had issues with GL here myself
[02:00:01] <olson_> I guess I'll give the Live CD a shot
[02:00:16] <olson_> I think that's on a eSata port
[02:00:19] <pfred1> why can't you use a regular HDD?
[02:00:45] <olson_> I'm working it someone elses equipment, and they didn't want to loose the main OS.
[02:01:44] <olson_> I suggested an extra drive and it showed up with a USB one. I figured that it probably wouldn't be terribly fast, but would work.
[02:02:13] <olson_> (I've certainly run Linux off of enough flash sticks in my time)
[02:04:21] <pfred1> then you know live isn't quite the same as installed
[02:04:36] <pfred1> almost sort of most of the time but not all of the time
[02:05:08] <pfred1> thing about EMC is it is pretty demanding some times
[02:06:27] <pfred1> olson_ but your latency testing went well?
[02:07:58] <olson_> It did as I recall
[02:08:05] <olson_> I didn';t know what it should be.
[02:08:13] <pfred1> it is what it is
[02:08:39] <pfred1> latency isn't something you can do very much about in most cases
[02:09:26] <olson_> I've been using the Sherline install as well, so switching to the LinuxCNC distributed should get me to a perhaps better supported version
[02:10:12] <pfred1> I am not familiar wiht what Sherline provides
[02:10:26] <pfred1> it sounds similar but there may be some differences
[02:10:37] <olson_> It copmes preconfigured
[02:10:46] <pfred1> in any event i cannot imagine yo ucan skip the latency testing
[02:10:47] <olson_> And is supposed to largely plug and play with their products
[02:10:55] <olson_> Since I'm having a Plug and Pray experience....
[02:11:01] <pfred1> there is no way they can guess your system's latency
[02:11:08] <olson_> It may have done something automatically
[02:11:16] <pfred1> nope not how it works
[02:11:20] <olson_> Okay
[02:11:30] <olson_> I'll need to learn how it works then
[02:11:43] <pfred1> yeah having your timing wrong is a show stopper
[02:12:02] <pfred1> your machine besically runs itself into hte ground not being able to keep up with itself
[02:12:15] <pfred1> it locks up
[02:12:52] <pfred1> so get the best latency figures you can from the systme you are on and use them properly
[02:13:26] <pfred1> there should be a button right in stepconf where you can do the testing
[02:13:36] <olson_> My early test got me 8190ns on the base thread
[02:14:08] <pfred1> did you try to read the USB drive while you were testing?
[02:14:26] <olson_> It was botted from it
[02:14:32] <olson_> booted even
[02:14:58] <pfred1> thats nice but what is more important is the results during the test not an event that happened beforehand
[02:15:37] <pfred1> the test is how your machine performs with RTAI
[02:15:39] <olson_> I ran the testing tool and a bunch of software at the same time
[02:15:44] <olson_> glxgears
[02:15:47] <olson_> firefox
[02:15:51] <olson_> wiggled windows
[02:15:52] <olson_> etc...
[02:16:16] <pfred1> so you used 8190ns as your base period?
[02:16:56] <pfred1> I think the default is 15000ns if you do not change anything
[02:17:02] <olson_> I think it waS 10000
[02:17:10] <olson_> yEAH, YOUR RIGHT
[02:17:14] <olson_> Argh capslock
[02:17:38] <pfred1> well if 8190ns is correct then 10 or 15K should be OK
[02:18:43] <pfred1> how does the sherline ini differ from the generic mill file?
[02:19:11] <olson_> Don't know
[02:19:32] <pfred1> might be a good idea to try to generate a generic ini then diff the two
[02:19:37] <olson_> Never got far enough through stepconf to generate one
[02:19:44] <olson_> port dies at axis test usually
[02:19:54] <olson_> I'm trying to get the live CD up
[02:19:57] <pfred1> then don't test the axises
[02:20:05] <olson_> After that I can compare
[02:20:16] <pfred1> but you're saying even the generic ini kills your system?
[02:20:19] <olson_> I saved the Sherline confs to a stick
[02:21:05] <olson_> I shall l;ikely be back
[02:21:11] <olson_> Thats for the assistance
[02:21:14] <olson_> Thanks
[02:21:16] <pfred1> I will say this when I set my machine up I didn't use any insmod or modprobe or anything I just put my port into stepconf and it worked for me
[02:21:33] <olson_> Hoping that will work with the officialish media
[02:21:53] <pfred1> yeah i have to hit the sack here early day tomorrow
[02:27:36] <olson_> Thanks again!
[02:27:38] -!- olson_ has quit [Quit: Leaving]
[02:31:33] -!- pfred1 has quit [Quit: Lost terminal]
[02:37:53] -!- cstop has quit [Quit: Leaving]
[02:58:06] -!- ries has quit [Quit: ries]
[03:36:07] -!- kb8wmc has quit [Quit: ChatZilla 0.9.88 [Firefox 10.0/20120130145648]]
[03:40:34] -!- sumpfralle has quit [Ping timeout: 245 seconds]
[03:43:43] -!- Nick001 [Nick001!~nospam@50.32.70.23] has joined #linuxcnc
[04:22:29] -!- [n00by] [[n00by]!~asdf@99-109-227-209.lightspeed.hstntx.sbcglobal.net] has joined #linuxcnc
[04:25:01] -!- |n0b0dy| has quit [Ping timeout: 276 seconds]
[04:40:24] -!- jbunch [jbunch!~jim@76.9.248.8] has joined #linuxcnc
[04:50:54] -!- cmorley has quit [Quit: Leaving.]
[04:57:57] [n00by] is now known as |n0b0dy|
[05:18:33] -!- mhaberler [mhaberler!~mhaberler@195.191.253.94] has joined #linuxcnc
[05:26:38] -!- factor has quit [Ping timeout: 240 seconds]
[06:32:49] -!- mhaberler has quit [Quit: mhaberler]
[06:50:07] -!- mhaberler [mhaberler!~mhaberler@195.191.253.94] has joined #linuxcnc
[06:56:08] -!- Redialtone has quit [Ping timeout: 265 seconds]
[07:03:54] -!- mhaberler has quit [Quit: mhaberler]
[07:18:48] -!- ve7it has quit [Remote host closed the connection]
[07:45:25] -!- maximilian_h has quit [Quit: Leaving.]
[07:54:07] -!- WalterN has quit [Read error: Connection reset by peer]
[07:54:38] -!- Tom_itx has quit [Ping timeout: 240 seconds]
[07:54:52] -!- WalterN [WalterN!~walter@host-174-45-122-145.bzm-mt.client.bresnan.net] has joined #linuxcnc
[07:55:17] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[08:01:01] -!- mozmck has quit [*.net *.split]
[08:01:49] -!- mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc
[08:05:06] -!- factor [factor!~factor@74.197.205.204] has joined #linuxcnc
[08:21:58] -!- jtr has quit [Ping timeout: 312 seconds]
[08:22:10] -!- jtr [jtr!~jtr@cpe-071-076-196-103.triad.res.rr.com] has joined #linuxcnc
[08:23:13] -!- CIA-6 has quit []
[08:25:19] -!- factor has quit [Quit: Leaving]
[08:25:37] -!- factor [factor!~factor@74.197.205.204] has joined #linuxcnc
[08:27:38] -!- Spida has quit [Ping timeout: 252 seconds]
[08:27:43] -!- Spida [Spida!~timo@ns1.spinnennetz.org] has joined #linuxcnc
[08:37:08] -!- jtr has quit [Ping timeout: 240 seconds]
[08:37:21] -!- jtr [jtr!~jtr@cpe-071-076-196-103.triad.res.rr.com] has joined #linuxcnc
[08:37:55] -!- icarusfactor [icarusfactor!~factor@74.197.205.204] has joined #linuxcnc
[08:38:00] -!- factor has quit [Ping timeout: 244 seconds]
[08:38:30] icarusfactor is now known as factor
[08:41:08] -!- mozmck has quit [Ping timeout: 240 seconds]
[08:46:45] -!- mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc
[09:30:16] -!- factor has quit [Read error: Connection reset by peer]
[09:39:11] <awallin> alex4nde1-: hi, re trochoidal pocketing, do you have any images/videos online? were you using a voronoi-diagram/medial-axis, or something else?
[09:41:13] <Jymmm> http://www.youtube.com/watch?v=lfOrDSp-tW4
[09:47:26] <archivist> http://wondermark.com/tink8/
[09:52:20] <awallin> Jymmm: do you know how cambam does that, under the hood? can it deal with arbitrarily shaped pockets?
[09:57:08] <archivist> awallin, you could ask the cambam programmer he may tell you as he is a friendly sort
[09:57:58] <awallin> ok. last I checked the cambam stuff was on cnczone. do they hang out there still?
[09:58:11] <archivist> I met him at one of the model engineer exhibitions
[09:58:21] -!- WalterN has quit [Read error: Connection reset by peer]
[09:58:42] -!- WalterN [WalterN!~walter@host-174-45-122-145.bzm-mt.client.bresnan.net] has joined #linuxcnc
[10:00:47] -!- iwoj_ [iwoj_!~iwoj@d23-16-234-107.bchsia.telus.net] has joined #linuxcnc
[10:01:42] -!- factor [factor!~factor@74.197.148.147] has joined #linuxcnc
[10:01:58] -!- iwoj has quit [Read error: Connection reset by peer]
[10:01:59] iwoj_ is now known as iwoj
[10:14:52] -!- psha [psha!~psha@213.208.162.69] has joined #linuxcnc
[10:20:15] -!- jonnyATroot [jonnyATroot!~jonny@90.183.82.208] has joined #linuxcnc
[10:34:58] -!- rob_h [rob_h!~rob_h@5ace702e.bb.sky.com] has joined #linuxcnc
[10:37:14] -!- jonnyATroot has quit [Ping timeout: 245 seconds]
[10:43:36] -!- Poincare has quit [Ping timeout: 248 seconds]
[10:51:05] -!- jonnyATroot [jonnyATroot!~jonny@90.183.82.208] has joined #linuxcnc
[10:54:55] -!- Poincare [Poincare!~jefffnode@2001:470:cb24:4::2] has joined #linuxcnc
[11:00:27] -!- cevad [cevad!~davec@host-174-45-229-40.bln-mt.client.bresnan.net] has joined #linuxcnc
[11:03:36] -!- davec_ has quit [Ping timeout: 265 seconds]
[11:16:42] Loetmichel_ is now known as Loetmichel
[12:01:30] -!- The_Ball has quit [Ping timeout: 240 seconds]
[12:16:29] -!- Farthen [Farthen!~Farthen@2a01:4f8:101:2a4:0:bc28:b2e1:9] has joined #linuxcnc
[12:54:22] -!- jonnyATroot has quit [Quit: Leaving]
[13:11:33] -!- servos4ever [servos4ever!~chatzilla@74-45-201-222.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[13:21:50] -!- ries [ries!~ries@200.125.129.54] has joined #linuxcnc
[13:25:14] -!- jonnyATroot [jonnyATroot!~jonny@90.183.82.208] has joined #linuxcnc
[13:56:30] -!- Tom_itx has quit []
[13:56:47] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc
[14:12:31] -!- vladimirek [vladimirek!~vladimire@bband-dyn226.178-40-36.t-com.sk] has joined #linuxcnc
[14:17:40] -!- vladimirek has quit [Remote host closed the connection]
[14:53:04] -!- syyl_ [syyl_!~syyl@p4FD15862.dip.t-dialin.net] has joined #linuxcnc
[14:56:35] -!- syyl has quit [Ping timeout: 265 seconds]
[15:08:07] -!- kb8wmc [kb8wmc!~chatzilla@nat.mtp.cmsinter.net] has joined #linuxcnc
[15:13:46] -!- psha has quit [Read error: No route to host]
[15:14:21] -!- psha [psha!~psha@213.208.162.69] has joined #linuxcnc
[15:33:25] <kb8wmc> psha: good day to you sir
[15:39:31] -!- tom3p [tom3p!~tomp@74-93-88-241-Illinois.hfc.comcastbusiness.net] has joined #linuxcnc
[15:40:22] <Loetmichel> *GNAH!* killed the PSU of my CNC AGAIN. Maybe te 32V 2A are NOT sufficient after all? (should have built a little bigger PSU, but the ex-Epson-LQ-PSU fits so well and i have about 100 left in the company ;-)
[15:43:06] <archivist> 2a is never enough
[15:53:50] <pcw_home> parallel 'em
[15:54:47] <pcw_home> with maybe a fractional Ohm balance resistor per PS
[16:00:25] <skunkworks_> pcw_home: did you see http://www.cnczone.com/forums/controller_computer_solutions/147097-galil_dmc-1050_controller_retrofit.html
[16:04:14] <pcw_home> Yeah I think that guy called us yesterday
[16:04:20] <tom3p> "another way to parallel SMPS's is to parallel through high current schottky diodes to isolate the supplies from each other. using schottky diodes gives only a 300mV forward drop across the diodes"
[16:04:37] <skunkworks_> pcw_home: Good? or scary?
[16:04:59] <pcw_home> But with diodes you need to add capacitors
[16:05:20] <tom3p> yeh, i used a big bulk and fed off that
[16:05:52] <pcw_home> Not scary, sounded competent
[16:06:49] <pcw_home> wanted to know if the Galil breakouts could be re-used (probably not)
[16:08:53] <pcw_home> Other people asked about the BISS capability (its there but untested as I'm too cheap to buy a BISS encoder)
[16:22:26] -!- isssy [isssy!~isssy@78-83-51-185.spectrumnet.bg] has joined #linuxcnc
[16:39:54] <skunkworks_> interesting.
[16:41:07] -!- tom3p [tom3p!~tomp@74-93-88-241-Illinois.hfc.comcastbusiness.net] has parted #linuxcnc
[16:41:39] <skunkworks_> absolute encoder. does homing work? or does emc see it as a normal encoder?
[16:41:50] -!- GoSebGo has quit [Quit: Bye]
[16:42:09] -!- GoSebGo [GoSebGo!~Seb@184.232.58.192] has joined #linuxcnc
[16:47:24] * JT-Shop homes in on a nap...
[16:48:00] -!- mozmck has quit [Quit: Leaving.]
[16:54:03] <pcw_home> I dont think LinuxCNC has any absolute encoder support yet (the resolver stuff emulates a incremental encoder at the driver level)
[16:58:01] <pcw_home> Maybe there's nothing really needed for a absolute encoder (just no need to home)
[16:59:09] <pcw_home> The resolver is a special case since its only absolute for ~one turn
[16:59:52] <psha> kb8wmc: hi
[17:04:12] <kb8wmc> psha: I have the video camera working properly thanks to your help and instructions...
[17:04:53] <kb8wmc> I will try not to forget again, what I have learned from you...
[17:05:17] <JT-Shop> hi Mike, how goes the hal mystery?
[17:24:18] -!- jasenk [jasenk!~kvirc@87.120.78.203] has joined #linuxcnc
[17:27:50] -!- mazafaka [mazafaka!~ig@unaffiliated/mazafaka] has joined #linuxcnc
[17:28:29] -!- mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc
[17:28:54] <mazafaka> Do I need to run 'sudo apt-get build-dep program_name' from the source directory of the program which I am trying to install?
[17:30:40] <alex4nde1-> awallin: I don't have any videos online, my stuff is all really simple though. I've mainly been writing pathes and watching how it affects the mill's load. I've got a Taig, and it's not very stiff so I'm trying to minimize shock to the tool/spindle.
[17:35:46] -!- mhaberler [mhaberler!~mhaberler@195.191.253.94] has joined #linuxcnc
[17:37:58] <psha> mazafaka: build-dep is used with name of package, not with source
[17:38:10] <mazafaka> uhu
[17:38:11] <psha> if you have source you should use dpkg-checkbuilddeps
[17:38:30] <mazafaka> from the source directory
[17:39:12] <psha> from the directory with debian/ subdir
[17:39:17] <psha> so it may find debian/control file
[17:48:14] <Loetmichel> so, back to workung aganin, ant THIS PSU will last a while (30V 6A instad of the old 32V 2A on the table below) -> http://www.cyrom.org/palbum/main.php?g2_itemId=12808
[17:48:19] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=12811
[18:01:06] -!- H264 [H264!~walter@host-174-45-122-145.bzm-mt.client.bresnan.net] has joined #linuxcnc
[18:03:45] -!- WalterN has quit [Ping timeout: 244 seconds]
[18:04:45] <kb8wmc> JT-Shop: good day sir, sorry I didn't see your message before this....how are you today?
[18:05:49] <kb8wmc> camera issues fixed and working well, have conflicts now between camera and joypad which I am attempting to resolve in the forum
[18:12:07] -!- mhaberler has quit [*.net *.split]
[18:12:07] -!- mozmck has quit [*.net *.split]
[18:12:07] -!- servos4ever has quit [*.net *.split]
[18:12:07] -!- rob_h has quit [*.net *.split]
[18:13:27] -!- mhaberler [mhaberler!~mhaberler@195.191.253.94] has joined #linuxcnc
[18:13:27] -!- mozmck [mozmck!~moses@client-74.117.92.175.dfwtx.partnershipbroadband.com] has joined #linuxcnc
[18:13:27] -!- servos4ever [servos4ever!~chatzilla@74-45-201-222.dr01.hnvr.mi.frontiernet.net] has joined #linuxcnc
[18:13:27] -!- rob_h [rob_h!~rob_h@5ace702e.bb.sky.com] has joined #linuxcnc
[18:14:01] H264 is now known as WalterN
[18:20:02] -!- sumpfralle [sumpfralle!~lars@31-16-21-63-dynip.superkabel.de] has joined #linuxcnc
[19:05:29] -!- mhaberler has quit [Quit: mhaberler]
[19:19:06] <mazafaka> jthornton: the wood stove: http://img-fotki.yandex.ru/get/5414/137304751.2/0_7783f_3f299963_XXL.jpg (I have bought some coal for it in pieces and as a powder).
[19:20:43] -!- sumpfralle has quit [Quit: Leaving.]
[19:27:20] <Loetmichel> hmm, the cheap milling spindle takes shape... the material fpr the coupling is sawed off already... after that i have to make the (0,6mm aluminium sheet) Body and the electronics... and then i can donate it to the local open workshop ;-)
[19:27:28] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=12814
[19:33:02] -!- isssy has quit [Ping timeout: 252 seconds]
[19:36:03] -!- sumpfralle [sumpfralle!~lars@31-16-21-63-dynip.superkabel.de] has joined #linuxcnc
[19:36:21] -!- sumpfralle has quit [Client Quit]
[19:38:12] -!- mazafaka [mazafaka!~ig@unaffiliated/mazafaka] has parted #linuxcnc
[19:48:05] -!- mazafaka [mazafaka!~ig@unaffiliated/mazafaka] has joined #linuxcnc
[20:17:45] <jthornton> mazafaka: is the stick in a can of petrol for easy lighting?
[20:17:58] <Jymmm> I saw that too! lol
[20:18:39] <Jymmm> I do like the sheet of plastic near/touching the metal heat shield
[20:24:29] <Loetmichel> hmmm, hase anyone some nknowledge about axle couplings? what would one suggest to connect the motor to the spindle that is homemade-able? -> http://www.cyrom.org/palbum/main.php?g2_itemId=12814
[20:24:59] <Loetmichel> http://www.cyrom.org/palbum/main.php?g2_itemId=12757
[20:25:21] <archivist> the type with rubber and a castle shape
[20:25:25] <Loetmichel> its an 8 mm chuck holder and a 5mm motor axle
[20:25:41] <Loetmichel> castle shape?
[20:25:49] <Jymmm> Loetmichel: tubing and hose clamps?
[20:26:06] <Loetmichel> Jymmm: 20-30 kRPM, 200W motor!
[20:26:16] <Loetmichel> no hose clamps ;-)
[20:26:20] <archivist> and this type http://www.arceurotrade.co.uk/Catalogue/Stepper-Motors/Oldham-Couplings
[20:26:27] <jthornton> hydraulic hose and hose clamps... I used that once to connect a lawn mower engine to a outboard lower unit
[20:26:46] <archivist> hose types are bad
[20:26:46] <Jymmm> jthornton: how did it work out?
[20:26:57] <jthornton> lasted for years
[20:27:09] <jthornton> was still working when I sold the rig
[20:27:14] <Loetmichel> hmm, oldenham seems doable
[20:27:17] <archivist> buggers slip when you dont want them too
[20:27:23] <Jymmm> Loetmichel: aluminum hex tubing and set screws
[20:27:27] <Loetmichel> i have amuminium, i have delrin...
[20:28:43] <Loetmichel> aluminium
[20:28:47] <archivist> http://img.directindustry.com/images_di/photo-m2/flexible-couplings-shaft-couplings-410984.jpg
[20:29:11] <Loetmichel> archivist: looks also doable.. and more my style ;-)
[20:29:38] <archivist> positive engagement I used bits of o ring for my first home made one
[20:29:42] <Jymmm> 1/4-20 hax standoffs and set screws
[20:29:46] <Jymmm> hex
[20:29:46] <jthornton> lovejoy type
[20:29:47] <Loetmichel> and i think i have some 6mm thick hard rubber somwhere
[20:30:38] <Jymmm> Loetmichel: this and some set screws http://images.grainger.com/B353_38/images/products/250x250/Hex-Standoff-1AJ94_AS01.JPG
[20:30:38] <archivist> I had less rubber, they did wear out though, so went and bough some oldham
[20:31:05] <archivist> Jymmm, er no
[20:31:14] <Loetmichel> Jymmm: cant do that. dont belive i got the axles PERFECT in line
[20:31:23] <Jymmm> archivist: He said home makable.
[20:31:38] <archivist> I know
[20:32:03] <archivist> and I know what machining he can do and what flexibility is needed
[20:32:03] <Loetmichel> Jymmm: where is the problem to make a oldham or the "star" type at home?
[20:32:11] <Loetmichel> i HAVE a CNC mill and a lathe ;-)
[20:32:20] <Jymmm> Loetmichel: Cool
[20:32:26] <archivist> no need to bodge
[20:32:52] <Loetmichel> archivist: bodge?
[20:33:13] <archivist> kludge
[20:33:24] <Loetmichel> ah, "pfuschen" in german ;-)
[20:33:42] <archivist> plenty examples on there i fixed it
[20:34:11] <Loetmichel> hmm, i think i give the "star" type a go
[20:34:46] <archivist> the star can have just a couple of dogs on both parts
[20:34:50] <Loetmichel> the oldham is a bit much "flying parts around" at 20krpm for me
[20:35:12] <archivist> they both are similar size
[20:36:01] <archivist> you could make http://i01.i.aliimg.com/wsphoto/v0/339609535/5mm-to-6-35mm-Flexible-Shaft-Coupler-5-6-35mm-Flex-Clamp-Shaft-Coupling-Connector-Diameter.jpg
[20:36:30] <archivist> one bit of metal and a slitting saw to make it
[20:36:57] <Loetmichel> archivist: that was my first idea
[20:37:20] <Loetmichel> but they have a spiral , havent they?
[20:37:44] <Loetmichel> dont know how to do THAT
[20:37:46] * jthornton goes back to the shop to make cannon parts
[20:38:19] <Jymmm> jthornton: 50mm balls?
[20:38:22] <archivist> Loetmichel, some are cut at 90 deg
[20:41:15] <mazafaka> jthornton: its a can of water :)
[20:44:07] <mazafaka> I plan to fit a SUV, a motorcycle, and a motorcycle with a disassembled sidecar into the garage (5.5 x 3.6 meters) soon
[20:46:06] <mazafaka> In Soviet Union, the purpose of the worker was his job. Large garages or two-or-more-story cottages were banned.
[20:46:56] <mazafaka> I will have to disassemble the soft top from the SUV to park it in the garage.
[20:46:57] <mrsun_> in Soviet Russia MIG welds you!
[20:47:23] <JT-Shop> Jymmm: 44.45mm bore
[20:48:08] -!- andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust492.basl.cable.virginmedia.com] has joined #linuxcnc
[20:48:16] <mazafaka> By the way, Jeep Wrangler is so tiny! Even compared to Land Cruiser Prado. Jeep Wrangler is only a little thicker and higher than Russian Niva.
[20:49:25] <andypugh> I wondered why it was so quiet, then realised that #emc is defunct.
[20:50:37] <mazafaka> Although, Wrangler's height either doesn't fit into the doors of my garage.
[20:51:50] -!- jasenk has quit [Quit: KVIrc 4.1.1 Equilibrium http://www.kvirc.net/]
[20:52:05] <Jymmm> andypugh: That's funny, #emc forwards to here automatically.
[20:52:39] <andypugh> There are 3 people in there...
[20:53:25] -!- psha has quit [Quit: Lost terminal]
[20:54:06] <mazafaka> they're RPF (retarted perverted freaks) ??!
[20:54:44] <mazafaka> Oh this Jurassic '#EMC'
[20:57:13] <mrsun_> http://i39.tinypic.com/ddcih5.jpg <-- my wood working place is starting to take shape =)
[20:58:22] <mazafaka> I would fear of wooden structure of the building.
[20:58:29] <andypugh> Aren't you under 9m of snow then?
[20:58:44] <mazafaka> who?
[20:59:04] <andypugh> mrsun
[20:59:22] <skunkworks_> andypugh: aren't you in the middle of the ocean...
[20:59:43] <andypugh> Not yet, I just got back from Finland, I have 2 weeks at home, then leave for China.
[20:59:57] <mrsun_> mazafaka, what? :P
[21:00:03] -!- jonnyATroot has quit [Ping timeout: 265 seconds]
[21:00:06] <mrsun_> that it stands on blocks and isnt fully supported? :P
[21:00:07] <mazafaka> We have relatively not much of the snow this winter. I even have some persistent tracks of my bicycle wheels all around the town.
[21:00:33] <mrsun_> its like 20cm of snow here, and ive seen to it no snow is on that structure =)
[21:00:58] -!- mode/#linuxcnc [+o Jymmm] by ChanServ
[21:01:17] <mrsun_> going to start working on the walls as soon as i can get more stuff home for it, im out of stuffs =)
[21:01:39] -!- jonnyATroot [jonnyATroot!~jonny@90.183.82.208] has joined #linuxcnc
[21:01:41] <andypugh> Lack of walls would have stopped me working where we were in Finland, it was -35.
[21:01:51] <Jymmm> andypugh: try joining #emc again
[21:01:53] <mazafaka> mrsun_: no, because wood is inflammable
[21:02:24] <andypugh> Jymmm: Invite only, it ways.
[21:02:28] <andypugh> (says)
[21:02:46] <mrsun_> ahh would fear of wooden structure =)
[21:02:52] <mrsun_> not fear for the wooden structure :P
[21:02:58] <Jymmm> andypugh: can you exit #linuxcnc then try join #emc?
[21:03:11] <andypugh> And miss all this witty banter?
[21:03:19] -!- andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust492.basl.cable.virginmedia.com] has parted #linuxcnc
[21:03:28] -!- andypugh [andypugh!~andy2@cpc2-basl1-0-0-cust492.basl.cable.virginmedia.com] has joined #linuxcnc
[21:03:38] <andypugh> Ah, OK, that seems to work.
[21:03:43] <Jymmm> ok cool
[21:04:13] <mazafaka> I more and more often think of concrete walls and maybe half a meter of the clay from the inside.
[21:05:14] <andypugh> They seem to like wooden buildings in the US, though it seems unnatural to me. The way to build houses is piling rocks on top of each other to me.
[21:05:40] <mazafaka> Not the flame itself but essentially toxic materials can be dangerous in what can be called a survival situation
[21:07:01] <mrsun_> im from sweden, almost everything here is made in wood =)
[21:07:11] <WalterN> Jymmm: I was...
[21:07:43] <Jymmm> WalterN: Ok, cool. Just cleaning up some things (you were in #emc too =)
[21:08:02] <WalterN> #emc is probably my autoconnect...
[21:08:11] <WalterN> why change the channel?
[21:08:20] <mazafaka> I'm from Russia. I own a separately standing items of real estate here and there all around the town. They are made of concrete.
[21:08:25] <Jymmm> Yeah, it SHOULD forward you to here from now on.
[21:08:42] <Jymmm> WalterN: see /topic
[21:09:34] <Jymmm> Hmmm, lets see if lawernces client reconnects
[21:10:36] <mazafaka> it makes me sad. Iused to work at a random time of the day and evening (and morning). I only can dream of something similar to the cottage, (when the garage is next to the kitchen). :)
[21:12:00] <Jymmm> By the powers of greyskull...
[21:12:02] -!- mode/#linuxcnc [-o Jymmm] by ChanServ
[21:12:21] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has parted #linuxcnc
[21:12:28] <mazafaka> he what? has died? Jymmm... jymmm...
[21:12:29] -!- Jymmm [Jymmm!~jymmm@unaffiliated/jymmm] has joined #linuxcnc
[21:12:42] <Jymmm> YAY!
[21:12:47] <mazafaka> we actually did love him!
[21:13:40] <mazafaka> there is he, ..>here<..
[21:17:13] <syyl_> http://dl.dropbox.com/u/24396704/2012-02-11_20-42-13_606.jpg
[21:17:15] <syyl_> done :D
[21:17:39] <syyl_> Jymmm, finaly i used a single layer of copypaper in front of a single led
[21:17:49] <mazafaka> I think americans and europeans has a gift of living separately, at cottages, when all the stuff is around them. But they take to much of the virgin areas of nature. Same bad is here, but our rich ones still prefer the flats. And usual people only own gardens which gives them greenies and vegetables for winter.
[21:18:47] <mazafaka> I have sold couple of the thingies like http://dl.dropbox.com/u/24396704/2012-02-11_20-42-13_606.jpg to become a real estate broker :)
[21:19:01] <syyl_> hehe ;)
[21:19:45] <mazafaka> (Buyers made me said 'communism is just a fake' several times before they had finally given me my money.)
[21:21:22] <mazafaka> I want to add a small winch to my motorbike, as at the one at http://icon1000.com/bike/the-roach/
[21:22:19] <syyl_> that thing looks badass :D
[21:23:06] <mazafaka> but i don't really like glamorous thingies
[21:24:05] <mazafaka> What if I use an automobile engine's starter (small electric motor revolving the engine when it runs)
[21:30:17] <mazafaka> Also, a small CNC machine which is just build around a small dish with a cake on it. Could be mind-blowing, could be sharp as a toothpaste with peppermint! (This now is a just a joke :)
[21:34:38] <mazafaka> We could decide to pull a small rig when you go off to the job each time it's Monday and it's 17th of some month. This would be twice more wise as another war! How much social noise would it produce?
[21:44:25] -!- adb2 [adb2!~adb2@178-211-236-142.dhcp.voenergies.net] has joined #linuxcnc
[21:44:31] <Loetmichel> ok, i THINK that will be sufficient... -> http://www.cyrom.org/palbum/main.php?g2_view=core.DownloadItem&g2_itemId=12817
[21:44:32] -!- adb2_ [adb2_!~adb2@178-211-236-142.dhcp.voenergies.net] has joined #linuxcnc
[21:45:11] <Loetmichel> the star will be 6mm PE sheet and the both "crowns" will be aluminium
[21:45:56] <mazafaka> Aluminum blanks you buy are of regular aluminum or it's some alloy as the one in bicycles (AL 6061 or Al 7071)?
[21:45:58] <Loetmichel> OH SH**... the crowns can only have 2 "teeth", not 4... will change drawing imediatly.
[21:50:47] <andypugh> Loetmichel: Motor mount?
[21:50:56] <Loetmichel> the coupling
[21:51:13] <andypugh> No, I mean, what is it a drawing of?
[21:51:30] <Loetmichel> cheap Spindle for a CNC mill
[21:51:47] <Loetmichel> http://www.hackerspace-ffm.de/wiki/index.php?title=Datei:Foto1519.jpg <- replacement for this
[21:52:20] <Loetmichel> which should be the moint for a proxxon FBS230
[21:52:32] <Loetmichel> but is more like a PITA
[21:53:20] <andypugh> Hmm, I would suggest a pair of angular contact bearings and a means of adjustment.
[21:53:30] <Loetmichel> the 20mm hole in the aluminium block looks like drilled with a forstner drill and a battery drill freehand, and the plexiglass mount is also rubbish
[21:54:25] <Loetmichel> thats how far i am right now: http://www.cyrom.org/palbum/main.php?g2_itemId=12814
[21:54:58] <Loetmichel> now the coupling has to be made and then the housing of the sopindle and the electronics
[21:55:09] <Jymmm> duct tape
[21:55:16] <andypugh> Have you seen the ER collets on eBay? One of those would make a nice shaft, and save you a lot of work: http://www.ebay.co.uk/itm/ER11-12MM-STRAIGHT-SHANK-COLLET-CHUCK-CNC-MILLING-LATHE-TOOL-WORKHOLDING-F82-/110813872025
[21:55:44] <Loetmichel> andypugh: the Collet is the axle if a proxxon (dremel)
[21:55:51] <andypugh> Ah, too late :;)
[21:55:57] <Loetmichel> so ther ARE already collets ;-)
[21:56:57] <andypugh> I meant "collet holder" really.
[21:57:11] <andypugh> But you are already nearly finished.
[21:57:46] <Loetmichel> i know
[21:58:38] <Loetmichel> andypugh: you mean something like this: -> http://www.cyrom.org/palbum/main.php?g2_itemId=11998
[21:58:40] <andypugh> Plexiglass for a spindle holder is an unusual choice. Can you confirm it wasn't your idea before I get very rude about it?
[21:58:42] <Loetmichel> ... alöready here
[21:58:45] <Loetmichel> already
[21:59:05] <andypugh> Yes, exactly like that :-)
[21:59:12] <Loetmichel> bu i wont donate the ER11 to a "open workspace"
[21:59:46] <Loetmichel> the CNC in question is located at "hackerspace FFM" around here where i live
[22:00:39] <Loetmichel> was there a few days ago to check it out and had pity with them, so i opted to make them a new spindle + holder
[22:02:01] <Loetmichel> all questions aswered?
[22:02:07] <Loetmichel> so no need to get rude ;-)
[22:02:15] <JT-Shop> LOL
[22:02:41] <andypugh> I guess you might choose plexiglass to add some damping.
[22:04:17] <Loetmichel> andypugh: if you want to get rude: look at my first CNC mill... about 15 years or so ago... -> http://www.cyrom.org/palbum/main.php?g2_itemId=2859
[22:04:28] <Loetmichel> ... and still: it has done some work ;-)
[22:05:12] <Loetmichel> that "machine" is made ENTIRELY of Plexiglass ;-)
[22:05:25] <mazafaka> http://www.cyrom.org/palbum/main.php?g2_itemId=2859 <-- but the spindle is weak for milling and engraving (as you had told recently)?
[22:05:43] <Loetmichel> it is
[22:05:50] <mazafaka> (when we talked of mini drills)
[22:05:55] <Loetmichel> that was my first attempt in CNCing ;-)
[22:06:06] <Loetmichel> about 15 jears ago
[22:07:23] <Loetmichel> the 5mm stainless steel Theads as drives had gnawed away the brass nuts in under 8 operating hours, even the lightest milling caused som flexing in the gantry, the steppers are out of old 5,25" floppy drives....
[22:07:46] <Loetmichel> and the spindle had about 20 mil play in the bearings
[22:07:58] <Loetmichel> but it worked more or less ;-)
[22:09:08] <Loetmichel> but now back to work, have to make some "star" couplings for the new spindle ;-)
[22:14:01] <andypugh> Loetmichel: The old one reminds me of Orac. Not the Denford lathe, the computer: http://en.wikipedia.org/wiki/Orac_(Blake%27s_7)
[22:14:37] <Loetmichel> hrhr
[22:21:34] -!- ries has quit [Read error: Connection reset by peer]
[22:21:39] -!- ries [ries!~ries@200.125.129.54] has joined #linuxcnc
[22:24:42] -!- ries_ [ries_!~ries@200.125.129.54] has joined #linuxcnc
[22:24:42] -!- ries has quit [Read error: Connection reset by peer]
[22:24:42] ries_ is now known as ries
[22:27:55] -!- ries_ [ries_!~ries@200.125.129.54] has joined #linuxcnc
[22:27:55] -!- ries has quit [Read error: Connection reset by peer]
[22:27:55] ries_ is now known as ries
[22:28:18] -!- adb2_ has quit [Quit: Quitte]
[22:30:14] -!- ries has quit [Read error: Connection reset by peer]
[22:30:15] -!- ries_ [ries_!~ries@200.125.129.54] has joined #linuxcnc
[22:50:47] adb2 is now known as adb
[22:54:07] -!- Fox_Muldr has quit [Ping timeout: 265 seconds]
[22:55:34] -!- Fox_Muldr [Fox_Muldr!quakeman@frnk-4d01db0a.pool.mediaWays.net] has joined #linuxcnc
[23:03:37] -!- clytle374 [clytle374!~clytle374@75-105-212-57.cust.wildblue.net] has joined #linuxcnc
[23:10:18] <clytle374> I've got a problem with the Mycenter-4 project. I'm starting to think I'm going to leave it gear drive with the high low clutches
[23:10:41] <clytle374> Is there a problem if I got that route and add an encoder to the spindle?
[23:11:20] <clytle374> Can you set 2 different pids for the high and low gears?
[23:11:30] <clytle374> Or am I over thinking it?
[23:33:02] <JT-Shop> clytle374: spindle motor is a servo?
[23:34:12] -!- The_Ball [The_Ball!~The_Ball@122.150.108.38] has joined #linuxcnc
[23:40:50] <andypugh> clytle374: You might find that 1 PID can handle both gears.
[23:42:12] <andypugh> Maybe set the FF1 to suit the high gear, and let the I-term ramp the motor speed up in low gear.
[23:42:29] <andypugh> (I am assuming a spindle-mounted encoder)
[23:42:57] <JT-Shop> andypugh: when is the departure to the far east?
[23:43:02] <andypugh> If it is a motor-mounted encoder then you could look at the "gearchange" HAL component.
[23:43:09] <andypugh> JT-Shop: A week on friday
[23:43:26] <JT-Shop> neat!
[23:44:36] <JT-Shop> is there a url to track the vessel?
[23:45:51] -!- jonnyATroot has quit [Quit: Leaving]
[23:46:14] <andypugh> www.clipperroundtheworld.com -> race viewer
[23:46:46] <JT-Shop> thanks
[23:47:03] <andypugh> I will be on the good ship Derry-Londonderry
[23:47:40] <JT-Shop> leg 6?
[23:47:51] <andypugh> Yes
[23:53:08] <JT-Shop> I will be following your progress from swamp east Missouri...
[23:53:31] <clytle374> Sorry, had to step away
[23:53:46] <clytle374> Thanks, just wanted to be sure there wasn't a gotcha
[23:56:05] <clytle374> I was going to belt drive it but looking at it I'll have to cut a large amount of webbing away
[23:57:02] <JT-Shop> interesting path the lead vessel has taken
[23:57:33] <JT-Shop> very long tacks
[23:57:36] <clytle374> I'll watch the race from dry land *landlover
[23:58:02] <JT-Shop> I used to live on a small sailing vessel in the Gulf of Mexio
[23:58:17] <JT-Shop> Mexico