Back
[00:00:38] -!- Einar__ has quit [Ping timeout: 240 seconds]
[00:03:58] <skunkworks> heh
[00:04:12] <skunkworks> I can log some more - but the bug tracker has a few samples
[00:04:31] <skunkworks> unless something else is happening
[00:04:41] <seb_kuzminsky> i'd love to see these torture gcodes added to our test suite, somehow
[00:04:47] <seb_kuzminsky> by someone who's not seb_kuzminsky
[00:05:01] <skunkworks> http://www.linuxcnc.org/media/kunena/attachments/343/Screenshotfrom2014-02-24130048.png
[00:05:09] <skunkworks> that is master
[00:05:53] <skunkworks> I have a program now that pushes it around 39
[00:06:22] <skunkworks> seb_kuzminsky: I think rob has a test suite of gcode programs..
[00:07:01] <seb_kuzminsky> cool! is it integrated with our runtests, or something that needs separate, manual operation?
[00:08:27] <skunkworks> I am not sure ( have not looked at it ) I don't know how that works
[00:09:04] <seb_kuzminsky> you've got some hal circuitry that works in sim, that detects constraint violations, right?
[00:09:36] <skunkworks> yes - it is mostly in the sim config.. I think chris made it
[00:10:44] <skunkworks> I just added halness to log the peak
[00:13:12] <skunkworks> I think though (again - just from what rob has mentioned (and reading the change logs)..) that he has a testing mechanism..
[00:13:50] <skunkworks> https://github.com/robEllenberg/linuxcnc-mirror/compare/feature;arc-cases-experimental
[00:18:38] -!- marmite_ has quit [Ping timeout: 240 seconds]
[00:21:54] -!- mhaberler has quit [Quit: mhaberler]
[00:25:21] -!- patricka_ has quit [Remote host closed the connection]
[00:28:26] -!- i_tarzan_ has quit [Ping timeout: 264 seconds]
[00:28:44] -!- reksio1 has quit [Quit: Leaving]
[00:30:47] -!- i_tarzan has quit [Ping timeout: 272 seconds]
[00:31:37] -!- gonzo__ has quit [Ping timeout: 240 seconds]
[00:35:12] -!- AR__ has quit [Ping timeout: 240 seconds]
[00:40:03] -!- rob_h has quit [Ping timeout: 240 seconds]
[00:40:07] -!- sirdancealo2 has quit [Ping timeout: 240 seconds]
[00:40:32] -!- rob_h [rob_h!~robh@90.219.232.142] has joined #linuxcnc-devel
[00:42:25] -!- sulky has quit [Ping timeout: 240 seconds]
[00:44:47] -!- skunkworks__ [skunkworks__!~skunkwork@68-115-41-210.static.eucl.wi.charter.com] has joined #linuxcnc-devel
[00:44:49] -!- davec__ has quit [Excess Flood]
[00:45:02] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[00:45:56] -!- mozmck1 [mozmck1!~moses@67.210.159.209] has joined #linuxcnc-devel
[00:47:27] -!- c-bob|| has quit [Write error: Broken pipe]
[00:47:44] -!- skunkworks_ has quit [Ping timeout: 240 seconds]
[00:47:45] -!- FreezingCold has quit [Ping timeout: 240 seconds]
[00:54:04] -!- rob_h has quit [*.net *.split]
[00:54:04] -!- i_tarzan has quit [*.net *.split]
[00:54:04] -!- CHNCguy has quit [*.net *.split]
[00:54:05] -!- sudobangbang has quit [*.net *.split]
[00:54:05] -!- eric_u_cnc has quit [*.net *.split]
[00:54:05] -!- mozmck has quit [*.net *.split]
[00:54:38] -!- rob_h [rob_h!~robh@90.219.232.142] has joined #linuxcnc-devel
[00:55:16] -!- Loetmichel has quit [Write error: Connection reset by peer]
[00:55:20] -!- toastydeath has quit [Write error: Connection reset by peer]
[00:55:24] -!- mozmck1 has quit [Read error: Connection reset by peer]
[00:56:48] -!- kjoller has quit [Write error: Connection reset by peer]
[00:58:28] -!- terabyte- has quit [Quit: terabyte-]
[00:59:57] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[01:02:02] -!- i_tarzan_ has quit [Ping timeout: 264 seconds]
[01:04:45] -!- asdfasd has quit [Ping timeout: 679 seconds]
[01:05:49] -!- MrSunshine has quit [Excess Flood]
[01:06:18] -!- AR_ has quit [Ping timeout: 642 seconds]
[01:06:28] -!- MacGalempsy has quit [Ping timeout: 642 seconds]
[01:06:36] -!- zlog_ has quit [Ping timeout: 642 seconds]
[01:08:44] -!- sulky has quit [Changing host]
[01:08:51] -!- viz has quit [Changing host]
[01:10:43] -!- zlog [zlog!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[01:12:50] -!- PetefromTn has quit [Remote host closed the connection]
[01:15:19] -!- gonzo___ has quit [Read error: Connection reset by peer]
[01:16:01] -!- davc has quit [Read error: Connection reset by peer]
[01:18:14] -!- phantoneD has quit [Ping timeout: 264 seconds]
[01:19:48] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[01:19:56] -!- AR__ has quit [Read error: Connection reset by peer]
[01:26:40] -!- arekm_ has quit [Changing host]
[01:27:23] -!- zlog_ [zlog_!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[01:29:34] -!- mozmck1 [mozmck1!~moses@67.210.159.209] has joined #linuxcnc-devel
[01:29:44] -!- sudobangbang has quit [Ping timeout: 240 seconds]
[01:29:44] -!- asdfasd1 has quit [Ping timeout: 240 seconds]
[01:29:44] -!- arekm has quit [Ping timeout: 240 seconds]
[01:29:44] -!- zlog has quit [Ping timeout: 240 seconds]
[01:29:45] -!- skunkworks has quit [Ping timeout: 240 seconds]
[01:29:45] -!- jst has quit [Ping timeout: 240 seconds]
[01:29:45] -!- rob_h has quit [Ping timeout: 240 seconds]
[01:29:45] -!- _methods has quit [Ping timeout: 240 seconds]
[01:29:46] -!- i_tarzan has quit [Ping timeout: 240 seconds]
[01:29:46] -!- _Fox_Muldr has quit [Ping timeout: 240 seconds]
[01:29:47] -!- mozmck has quit [Ping timeout: 240 seconds]
[01:30:13] -!- skunkworks [skunkworks!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc-devel
[01:30:43] -!- rob_h [rob_h!~robh@90.219.232.142] has joined #linuxcnc-devel
[01:31:05] -!- PetefromTn has quit [Remote host closed the connection]
[01:33:56] -!- Servos4ever has quit [Quit: ChatZilla 0.9.90.1 [SeaMonkey 2.24/20140203230751]]
[01:35:08] -!- FreezingCold has quit [Ping timeout: 244 seconds]
[01:45:13] -!- rob_h has quit [Ping timeout: 240 seconds]
[01:51:26] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[02:05:34] -!- jerryitt has quit [Quit: Connection closed for inactivity]
[02:08:13] -!- zlog_ has quit [Remote host closed the connection]
[02:08:15] -!- Tom_itx has quit []
[02:10:26] -!- Tom_itx [Tom_itx!~Tl@unaffiliated/toml/x-013812] has joined #linuxcnc-devel
[02:10:35] -!- zlog [zlog!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[02:21:50] -!- c-bob has quit [Ping timeout: 264 seconds]
[02:28:34] -!- smooch has quit [Client Quit]
[02:32:38] -!- amiri has quit [Ping timeout: 264 seconds]
[02:33:15] -!- PetefromTn_ [PetefromTn_!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[02:37:07] -!- c-bob| has quit [Ping timeout: 240 seconds]
[02:37:07] -!- PetefromTn has quit [Ping timeout: 240 seconds]
[02:38:49] -!- MacGalempsy_ has quit [Remote host closed the connection]
[02:40:22] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[03:01:13] -!- terabyte- has quit [Client Quit]
[03:07:51] -!- terabyte- has quit [Quit: terabyte-]
[03:09:59] -!- PetefromTn_ has quit [Remote host closed the connection]
[03:22:19] -!- uw has quit [Quit: Leaving]
[03:34:30] <skunkworks> cradek:
http://imagebin.org/296250
[03:34:32] <skunkworks> http://pastebin.ca/2648104
[03:41:50] <skunkworks> (and because I don't seem to comunicate very well.. That is the x acceleration of the pastebins program. The axis acceleration is set to 30 and it is peaking at about 38in/s^2
[03:43:18] -!- PetefromTn has quit [Quit: Bye]
[03:46:18] -!- amiri_ has quit [Remote host closed the connection]
[04:12:12] -!- AR__ has quit [Ping timeout: 244 seconds]
[04:28:13] -!- asdfasd has quit [Ping timeout: 244 seconds]
[04:28:48] -!- patrickarlt has quit [Quit: Leaving...]
[04:37:12] -!- skunkworks_ [skunkworks_!~chatzilla@str-broadband-ccmts-ws-26.dsl.airstreamcomm.net] has joined #linuxcnc-devel
[04:37:28] -!- skunkworks has quit [Ping timeout: 240 seconds]
[04:37:29] -!- marmite has quit [Ping timeout: 240 seconds]
[04:37:36] skunkworks_ is now known as skunkworks
[04:41:21] -!- zlog_ [zlog_!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[04:42:43] -!- qingpei has quit [*.net *.split]
[04:42:43] -!- zlog has quit [*.net *.split]
[04:42:44] -!- _methods_ has quit [*.net *.split]
[04:42:44] -!- davec__ has quit [*.net *.split]
[04:42:44] -!- phantoxeD has quit [*.net *.split]
[04:45:53] <KGB-linuxcnc> 03ArcEye 05master 8399d84 06linuxcnc 10lib/python/pyvcp_widgets.py Fix backward incompatibility in pyvcp_bar * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8399d84
[04:45:53] <KGB-linuxcnc> 03Chris Morley 05master fba6f65 06linuxcnc Merge branch 'master' of ssh://git.linuxcnc.org/git/emc2 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fba6f65
[04:48:24] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[04:49:50] -!- sudobangbang has quit [Ping timeout: 240 seconds]
[04:49:54] -!- zlog_ has quit [Ping timeout: 240 seconds]
[04:50:08] sudobangbang_ is now known as sudobangbang
[04:50:11] -!- zlog [zlog!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[04:52:33] <linuxcnc-build> build #6 of wheezy-armhf-sim is complete: Failure [4failed apt-get-update compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/wheezy-armhf-sim/builds/6 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>, ArcEye <arceye@mgware.co.uk>
[04:56:44] -!- _methods has quit [Ping timeout: 252 seconds]
[04:59:45] -!- zlog_ [zlog_!~zlog@ip24-255-188-115.ks.ks.cox.net] has joined #linuxcnc-devel
[05:02:57] -!- zlog has quit [Ping timeout: 240 seconds]
[05:02:58] -!- _methods_ has quit [Ping timeout: 240 seconds]
[05:06:41] -!- phantoneD has quit [Write error: Connection reset by peer]
[05:08:40] -!- amiri has quit [Write error: Connection reset by peer]
[05:08:41] -!- trufa has quit [Write error: Broken pipe]
[05:11:00] -!- patrickarlt has quit [Ping timeout: 245 seconds]
[05:11:03] -!- gonzo__ has quit [Ping timeout: 245 seconds]
[05:13:20] -!- FinboySlick has quit [Remote host closed the connection]
[05:13:47] -!- terabyte- has quit [Quit: terabyte-]
[05:18:25] -!- ve7it has quit [Remote host closed the connection]
[05:20:39] -!- qingpei has quit [Quit: qingpei]
[05:27:42] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[05:28:07] -!- Connor has quit [Ping timeout: 330 seconds]
[05:28:07] -!- ds3 has quit [Ping timeout: 330 seconds]
[05:33:25] <linuxcnc-build> build #1824 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1824 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>, ArcEye <arceye@mgware.co.uk>
[05:39:41] MrHindsight is now known as CaptHindsight
[05:40:31] -!- ries has quit [Quit: ries]
[05:44:33] -!- qingpei has quit [Quit: qingpei]
[05:45:35] -!- patricka_ has quit [Quit: Leaving...]
[06:00:42] -!- kwallace2 [kwallace2!~kwallace@smb-248.sonnet.com] has parted #linuxcnc-devel
[06:01:18] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[06:01:45] -!- Fox_Muldr has quit [Ping timeout: 244 seconds]
[06:05:12] -!- ries_nicked has quit [Ping timeout: 539 seconds]
[06:05:13] -!- sudobangbang has quit [Ping timeout: 539 seconds]
[06:05:13] -!- mozmck1 has quit [Ping timeout: 539 seconds]
[06:05:34] -!- jerryitt has quit [Quit: Connection closed for inactivity]
[06:05:58] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[06:10:51] -!- sudobangbang_ has quit [Excess Flood]
[06:16:09] -!- qingpei has quit [Quit: qingpei]
[06:20:26] -!- emcPT|2 [emcPT|2!~kvirc@bl5-195-45.dsl.telepac.pt] has joined #linuxcnc-devel
[06:24:28] -!- Connor has quit [Ping timeout: 244 seconds]
[06:31:00] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[06:41:02] -!- alusion has quit [Ping timeout: 264 seconds]
[06:41:39] -!- kjoller2 has quit [Quit: Nettalk6 - www.ntalk.de]
[06:44:36] -!- GJdan has quit [Quit: WeeChat 0.4.3]
[06:48:15] -!- FreezingCold has quit [Ping timeout: 244 seconds]
[07:02:29] -!- mozmck has quit [Read error: Connection reset by peer]
[07:04:00] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[07:07:26] -!- GuShH_ has quit [Ping timeout: 264 seconds]
[07:09:38] -!- emcPT|2 has quit [Ping timeout: 252 seconds]
[07:17:41] <KGB-linuxcnc> 03Sebastian Kuzminsky 05unified-build-candidate-3 cd064dc 06linuxcnc 10src/rtapi/rtapi_time.c use perf interface if no rdtsc instruction is known * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=cd064dc
[07:24:24] -!- emcPT|2 [emcPT|2!~kvirc@bl8-28-51.dsl.telepac.pt] has joined #linuxcnc-devel
[07:58:39] -!- mhaberler [mhaberler!~mhaberler@macbook.stiwoll.mah.priv.at] has joined #linuxcnc-devel
[08:13:20] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[08:20:46] -!- tjb1 has quit [Read error: Connection reset by peer]
[08:25:52] arekm_ is now known as arekm
[08:33:33] -!- tinkerer [tinkerer!~tinkerer@mail.play-pla.net] has joined #linuxcnc-devel
[08:35:31] -!- Thetawaves has quit [Quit: This computer has gone to sleep]
[08:36:48] <mhaberler> Seb: the ARM tsc replacement fragment from the google code link works fine. Just have to figure the proper ARM #defines, ARMV6 isnt enough.
[08:51:06] -!- perl has quit [Client Quit]
[08:55:59] -!- emcPT [emcPT!~kvirc@bl5-200-204.dsl.telepac.pt] has joined #linuxcnc-devel
[08:59:05] -!- emcPT|2 has quit [Ping timeout: 252 seconds]
[09:05:18] -!- herron_ has quit [Ping timeout: 240 seconds]
[09:07:37] -!- qingpei has quit [Ping timeout: 252 seconds]
[09:11:44] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[09:26:18] -!- syyl-- has quit [Ping timeout: 240 seconds]
[09:27:50] -!- qingpei has quit [Quit: qingpei]
[09:32:05] <mhaberler> Seb: tentative patch for ARM TSC, please have a look :
http://git.mah.priv.at/gitweb?p=emc2-dev.git;a=blobdiff;f=src/rtapi/rtapi_time.c;h=0d4c3ea421215fc46aafd811f33852d919e6b51d;hp=30683dad5914eac5e124534b10f6b0c4c8b977d7;hb=9135e4364ce931ff89698885b187afbb62c9d64e;hpb=771757a315303adecd7c97db9707a5e840ca1794
[09:32:24] <mhaberler> Jeff - in case you're around: I'd appreciate a look from you as well
[09:32:42] <mhaberler> eventually this should go into an archdep.h file in src/rtapi
[09:37:33] <mhaberler> oh man.. doubled up. I suggest to use my code as ARM read_tsc and Seb's perfcount method as fallback.
[09:39:39] -!- sysdba has quit [Quit: Colloquy for iPhone - http://colloquy.mobi]
[09:40:53] -!- trufa_ has quit [Ping timeout: 252 seconds]
[09:53:29] -!- sumpfralle has quit [Ping timeout: 240 seconds]
[10:04:26] -!- rob_h [rob_h!~robh@90.219.232.142] has joined #linuxcnc-devel
[10:25:38] -!- _ink has quit [Read error: Connection reset by peer]
[10:26:01] -!- mhaberler has quit [Ping timeout: 240 seconds]
[10:26:41] -!- qingpei [qingpei!~qingpei@218.2.101.210] has joined #linuxcnc-devel
[10:32:11] -!- sirdancealo2 has quit [Quit: Ragequit]
[10:34:26] <linuxcnc-build> build #7 of wheezy-armhf-sim is complete: Failure [4failed apt-get-update compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/wheezy-armhf-sim/builds/7 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[10:34:26] <linuxcnc-build> build #1825 of checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1825 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[10:45:54] -!- b_b has quit [Changing host]
[11:09:27] -!- chillly has quit [Client Quit]
[11:23:02] -!- PCW has quit [Ping timeout: 264 seconds]
[11:23:06] PCW_ is now known as PCW
[11:37:04] -!- skunkworks has quit [Remote host closed the connection]
[11:38:16] kludge` is now known as kludge`_
[11:40:25] kludge`_ is now known as kludge`
[11:49:18] -!- jef79m has quit [Ping timeout: 240 seconds]
[11:49:37] -!- balestrino has quit [Ping timeout: 240 seconds]
[11:55:42] -!- kjoller has quit [Remote host closed the connection]
[12:18:49] -!- chillly has quit [Ping timeout: 240 seconds]
[12:20:58] -!- smellymoo has quit [Ping timeout: 244 seconds]
[12:23:50] -!- JT-Shop has quit [Read error: Connection reset by peer]
[12:23:50] -!- jthornton has quit [Read error: Connection reset by peer]
[12:24:39] -!- JT-Shop [JT-Shop!~john@75.106.20.181] has joined #linuxcnc-devel
[12:24:52] -!- jthornton [jthornton!~john@75.106.20.181] has joined #linuxcnc-devel
[12:30:17] -!- nylar has quit [Ping timeout: 252 seconds]
[12:41:15] -!- amiri_ has quit [Read error: Connection reset by peer]
[13:02:29] -!- ckotil has quit [Changing host]
[13:24:25] -!- md-2 has quit [Remote host closed the connection]
[13:28:07] -!- kb8wmc [kb8wmc!~chatzilla@64.25.194.29] has joined #linuxcnc-devel
[13:29:10] -!- md-2 has quit [Ping timeout: 244 seconds]
[13:47:37] -!- krusty_ar has quit [Ping timeout: 240 seconds]
[13:48:54] -!- smellymoo has quit [Quit: Leaving]
[13:55:13] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[14:08:48] -!- dway has quit [Quit: NOOOOOOooooooooo……]
[14:16:50] -!- dnaleromj has quit [Quit: Dang. Where did dnaleromj's computer go?]
[14:33:17] -!- lyzidiamond has quit [Quit: lyzidiamond]
[14:38:22] -!- dnaleromj [dnaleromj!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[14:41:40] -!- mle has quit [Ping timeout: 323 seconds]
[14:44:34] -!- Valen has quit [Quit: Leaving.]
[14:49:29] -!- lyzidiamond has quit [Quit: lyzidiamond]
[14:59:09] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[15:17:26] -!- l0ggy_ has quit [Ping timeout: 265 seconds]
[15:20:04] -!- krusty_ar has quit [Read error: Connection reset by peer]
[15:21:24] -!- kwallace [kwallace!~kwallace@smb-60.sonnet.com] has joined #linuxcnc-devel
[15:26:51] -!- lyzidiamond has quit [Quit: lyzidiamond]
[15:37:04] -!- duckasaurus has quit [Quit: WeeChat 0.3.2]
[15:43:00] -!- mle has quit [Read error: Connection reset by peer]
[15:47:42] -!- FinboySlick has quit [Quit: Leaving.]
[15:52:25] -!- sudobangbang has quit [Ping timeout: 240 seconds]
[15:54:50] -!- sigiiCNC has quit [Remote host closed the connection]
[15:57:16] -!- kwallace2 [kwallace2!~kwallace@smb-252.sonnet.com] has joined #linuxcnc-devel
[15:59:59] -!- kwallace has quit [Ping timeout: 240 seconds]
[16:02:26] -!- Einar__ has quit [Ping timeout: 240 seconds]
[16:09:54] -!- Deejay has quit [Quit: brb]
[16:11:33] -!- Deejay has quit [Changing host]
[16:14:34] -!- dnaleromj has quit [Quit: Dang. Where did dnaleromj's computer go?]
[16:23:49] -!- Deejay has quit [Remote host closed the connection]
[16:26:15] -!- thomaslindstr_m has quit [Write error: Broken pipe]
[16:26:24] -!- PetefromTn has quit [Remote host closed the connection]
[16:27:33] -!- dnaleromj [dnaleromj!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[16:32:27] -!- zeeshan has quit [Ping timeout: 245 seconds]
[16:32:46] -!- amiri has quit [Read error: Connection reset by peer]
[16:38:01] -!- amiri has quit [Ping timeout: 240 seconds]
[16:38:49] -!- patrickarlt has quit [Ping timeout: 240 seconds]
[16:43:27] -!- Einar__ has quit [Read error: Connection reset by peer]
[16:43:45] <skunkworks__> dgarr, cool video - are you playing with the new tp?
[16:46:28] <dgarr> a little-- rob is looking at my patches, the video is a demo for him; if you want to try, there is a patch set that applies to his branch named circular-blend-arc-experimental
[16:46:31] <dgarr> http://www.panix.com/~dgarrett/stuff/tptest_all.mbox
[16:49:04] -!- emcPT has quit [Quit: KVIrc 4.2.0 Equilibrium http://www.kvirc.net/]
[16:50:53] <seb_kuzminsky> mhaberler: does that code work? how do you set the user enable bit?
[16:53:09] <seb_kuzminsky> i bet you tested on a xenomai kernel, and i bet it sets user enable for that register
[16:53:27] -!- Einar__ has quit [Read error: Connection reset by peer]
[16:53:40] <seb_kuzminsky> the problem i reported occurs on the vanilla kernel (with bbb patches, but without xenomai patches)
[16:54:30] <seb_kuzminsky> the arm assembly fragment failed on my kernel (it killed my process with an Illegal Instruction signal, as you'd expect if user enable was not set on that reg)
[16:56:27] -!- Einar__ has quit [Read error: Connection reset by peer]
[16:56:33] -!- ravenlock has quit [Changing host]
[17:02:44] -!- dnaleromj has quit [Quit: Dang. Where did dnaleromj's computer go?]
[17:03:30] -!- Einar__ has quit [Read error: Connection reset by peer]
[17:06:47] -!- jnaour_ has quit [Remote host closed the connection]
[17:07:43] -!- KimK has quit [Ping timeout: 244 seconds]
[17:07:57] -!- dnaleromj [dnaleromj!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[17:08:12] -!- KimK [KimK!~Kim__@ip24-255-223-153.ks.ks.cox.net] has joined #linuxcnc-devel
[17:13:28] -!- Einar__ has quit [Read error: Connection reset by peer]
[17:23:28] -!- Einar__ has quit [Read error: Connection reset by peer]
[17:25:59] -!- dnaleromj has quit [Quit: Dang. Where did dnaleromj's computer go?]
[17:41:38] -!- skunkworks__ has quit [Ping timeout: 264 seconds]
[17:42:44] -!- Einar__ has quit [*.net *.split]
[17:42:45] -!- KimK has quit [*.net *.split]
[17:42:45] -!- ravenlock has quit [*.net *.split]
[17:42:45] -!- patricka_ has quit [*.net *.split]
[17:42:45] -!- sudobangbang has quit [*.net *.split]
[17:42:45] -!- kwallace2 has quit [*.net *.split]
[17:42:45] -!- l0ggy has quit [*.net *.split]
[17:42:45] -!- mablae has quit [*.net *.split]
[17:42:45] -!- sumpfralle has quit [*.net *.split]
[17:42:45] -!- terabyte- has quit [*.net *.split]
[17:42:45] -!- trufa has quit [*.net *.split]
[17:42:45] -!- ink has quit [*.net *.split]
[17:42:45] -!- PCW has quit [*.net *.split]
[17:42:46] -!- milania has quit [*.net *.split]
[17:42:46] -!- Connor has quit [*.net *.split]
[17:42:46] -!- ds3 has quit [*.net *.split]
[17:42:46] -!- gonzo_nb has quit [*.net *.split]
[17:42:46] -!- motioncontrol has quit [*.net *.split]
[17:42:46] -!- syyl_ws has quit [*.net *.split]
[17:42:46] -!- zeeshan has quit [*.net *.split]
[17:42:46] -!- printallthething has quit [*.net *.split]
[17:42:46] -!- FinboySlick has quit [*.net *.split]
[17:42:48] -!- dgarr has quit [*.net *.split]
[17:42:48] -!- JT-Shop has quit [*.net *.split]
[17:42:48] -!- chillly has quit [*.net *.split]
[17:42:48] -!- larryone has quit [*.net *.split]
[17:42:48] -!- syyl- has quit [*.net *.split]
[17:42:48] -!- tinkerer has quit [*.net *.split]
[17:42:48] -!- asdfasd has quit [*.net *.split]
[17:42:48] -!- _Fox_Muldr has quit [*.net *.split]
[17:50:42] -!- KimK [KimK!~Kim__@ip24-255-223-153.ks.ks.cox.net] has joined #linuxcnc-devel
[17:50:42] -!- skunkworks_ [skunkworks_!~skunkwork@68.115.41.210] has joined #linuxcnc-devel
[17:50:42] -!- tinkerer [tinkerer!~tinkerer@mail.play-pla.net] has joined #linuxcnc-devel
[17:50:42] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[17:51:19] -!- 23LAAD1U8 has quit [Read error: Connection reset by peer]
[17:51:45] -!- dnaleromj [dnaleromj!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[17:52:07] -!- syyl_ws has quit [Client Quit]
[17:53:04] -!- calvinmetcalf has quit [Ping timeout: 245 seconds]
[17:53:26] -!- Einar_ has quit [Read error: Connection reset by peer]
[17:58:24] -!- kwallace [kwallace!~kwallace@smb-252.sonnet.com] has joined #linuxcnc-devel
[17:59:41] -!- chillly has quit [Ping timeout: 240 seconds]
[17:59:42] -!- dgarr has quit [Ping timeout: 240 seconds]
[17:59:43] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[17:59:43] -!- FreezingCold has quit [Ping timeout: 240 seconds]
[18:03:30] -!- sfello has quit [Quit: sfello]
[18:04:04] -!- skunkworks__ [skunkworks__!~skunkwork@68-115-41-210.static.eucl.wi.charter.com] has joined #linuxcnc-devel
[18:04:13] -!- GJdan has quit [Ping timeout: 240 seconds]
[18:04:13] -!- trufa has quit [Ping timeout: 240 seconds]
[18:04:52] -!- skunkworks_ has quit [Ping timeout: 240 seconds]
[18:04:53] -!- motioncontrol has quit [Ping timeout: 240 seconds]
[18:05:14] -!- thomaslindstr_m has quit [Quit: Leaving...]
[18:07:32] -!- maximilian_h [maximilian_h!~bonsai@stgt-5d8499cd.pool.mediaWays.net] has joined #linuxcnc-devel
[18:08:00] -!- Fox_Muldr has quit [Ping timeout: 240 seconds]
[18:10:58] -!- KimK has quit [Ping timeout: 240 seconds]
[18:10:58] -!- trufa has quit [Ping timeout: 240 seconds]
[18:13:02] -!- KimK [KimK!~Kim__@ip24-255-223-153.ks.ks.cox.net] has joined #linuxcnc-devel
[18:19:48] -!- printallthething has quit [Quit: Leaving]
[18:20:30] -!- dnaleromj has quit [Quit: Dang. Where did dnaleromj's computer go?]
[18:24:32] <seb_kuzminsky> mhaberler: would you mind taking a look at the test failure on wheezy-armhf from last night?
[18:24:50] <seb_kuzminsky> this is a build of glo/ubc, posix flavor, on a bbb
[18:25:10] <seb_kuzminsky> the threads.0 test failed:
[18:25:11] <seb_kuzminsky> http://buildbot.linuxcnc.org/buildbot/builders/wheezy-armhf-sim/builds/7/steps/runtests/logs/stdio
[18:25:18] <seb_kuzminsky> search for "threads.0: FAIL"
[18:31:18] -!- md-2 has quit [Quit: Leaving...]
[18:31:44] <seb_kuzminsky> the result file recorded by halsampler is here:
http://highlab.com/~seb/linuxcnc/threads.0-result
[18:31:53] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[18:32:27] <seb_kuzminsky> line 2491 shows a reset from 10, and halsampler reads 0 instead of 1
[18:33:07] <seb_kuzminsky> i think the only way that can happen is if the slow thread interrupts the fast thread between the threadtest.increment funciton and the halsampler read function
[18:33:35] <seb_kuzminsky> linuxcnc-build: force build --branch=unified-build-candidate-3 checkin
[18:33:35] <linuxcnc-build> build #1826 forced
[18:33:36] <linuxcnc-build> I'll give a shout when the build finishes
[18:50:49] -!- JT-Shop [JT-Shop!~john@75.106.20.181] has joined #linuxcnc-devel
[18:52:35] <seb_kuzminsky> about that threads.0 test failure... it looks like the build doesn't set the capabilities on rtapi_app_posix? but shouldnt that make realtime_thread() print all those error messages? i dont see them anywhere
[18:53:16] <seb_kuzminsky> do i need DEBUG=5 or ULAPI_DEBUG=5 or something? i still dont understand what messages go where, in ubc :-/
[18:54:58] <CaptHindsight> I guess I should look into the BBB branch. Someone just asked me about an Evil Linuxcnc version where it runs from a remote server on a subscription basis :)
[18:56:33] -!- alusion has quit [Changing host]
[18:57:37] -!- dnaleromj [dnaleromj!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[18:57:54] <CaptHindsight> http://boingboing.net/2014/01/06/high-end-cnc-machines-cant-b.html
[19:03:01] <skunkworks__> does anyone have the 4 axis tort.ngc file?
[19:04:21] <skunkworks__> ie
http://wiki.linuxcnc.org/uploads/planner-test.jpg
[19:08:06] <mozmck> CaptHindsight: I can't stand that kind of stuff (GPS on a milling machine?!?), but the article is a little ignorant: "A subtly weakened or defective part from a big mill like the NV5000 might find its way into a vehicle or a high-speed machine, with disastrous consequences." Huh?
[19:08:38] -!- Cylly has quit [Ping timeout: 264 seconds]
[19:09:43] <mozmck> But I guess since the guy is a science fiction novelist, it's understandable ;)
[19:10:07] <archivist> scare mongering
[19:14:00] <skunkworks__> hmm - looks like the torture.py makes the 4 axis version
[19:15:59] <skunkworks__> hmm maybe not
[19:16:17] <skunkworks__> oh - yes it does
[19:17:47] -!- IchGuckLive has quit [Quit: ChatZilla 0.9.87 [Firefox 20.0/20130329043827]]
[19:20:15] <CaptHindsight> mozmck: wasn't sure how much was actual truth and how much is writers embellishment
[19:20:25] <CaptHindsight> http://www.practicalmachinist.com/vb/dmg-mori-gildemeister-maho-cnc/mori-ellison-gyroscope-unlocking-273841/
[19:20:57] <mozmck> :) I *think* most machine shops measure parts to make sure they meet specs.
[19:21:55] <CaptHindsight> mozmck: I'm sure on the QC but it was the machine tracking and subscription that got me thinking about controlling can a corp get
[19:22:11] <mozmck> that can include surface finish as well.
[19:22:37] <mozmck> Yes, I just read the practical machinist thread. Yuck!
[19:22:55] <CaptHindsight> ok, this is all coming together now
[19:23:02] <mozmck> Looks like it is probably gov requirements though
[19:23:25] <mozmck> and there's no limit to how controlling they can get...
[19:23:52] <CaptHindsight> I just met with a government lab and they are working on anti-counterfeit techniques built into devices for the military
[19:24:18] <CaptHindsight> this requirement makes since now
[19:24:50] <CaptHindsight> sense/since
[19:30:09] -!- kwallace [kwallace!~kwallace@smb-252.sonnet.com] has parted #linuxcnc-devel
[19:33:00] -!- kwallace [kwallace!~kwallace@smb-252.sonnet.com] has joined #linuxcnc-devel
[19:33:04] <CaptHindsight> ah and CNC machines needing to meet ITAR
http://en.wikipedia.org/wiki/International_Traffic_in_Arms_Regulations
[19:36:30] <skunkworks__> so.. is there a way to make the program display rotate instead of the tool? so the tool would stay vertical - but the program preveiw would rotate...
[19:37:01] <skunkworks__> The AXYZBC geomitry setting gets you 50% there..
[19:37:13] <skunkworks__> geometry
[19:44:57] -!- crank__ has quit [Quit: leaving]
[19:45:11] -!- crank_ has quit [Quit: leaving]
[19:46:00] -!- andypugh [andypugh!~andy2@cpc14-basl11-2-0-cust436.20-1.cable.virginm.net] has joined #linuxcnc-devel
[19:47:39] -!- trufa has quit [Ping timeout: 264 seconds]
[20:03:35] -!- motioncontrol has quit [Quit: Sto andando via]
[20:21:38] -!- qingpei has quit [Quit: qingpei]
[20:36:27] -!- sudobangbang has quit [Ping timeout: 265 seconds]
[20:46:50] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/ini_includes 849884b 06linuxcnc 10(21 files in 2 dirs) linuxcnc.in: support ini with includes directives * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=849884b
[20:48:20] <seb_kuzminsky> that's cool dgarr
[20:50:08] <seb_kuzminsky> the #includes won't work for programs other than 'linuxcnc', such as sai
[20:50:17] <seb_kuzminsky> also, would you document it in the ini config docs?
[21:00:00] <KGB-linuxcnc> 03Norbert Schechner 05gmoccapy_1_0 5797977 06linuxcnc 10(219 files in 22 dirs) gmoccapy 1.0 - stand alone , separated from gscreen * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5797977
[21:12:51] <KGB-linuxcnc> 03Norbert Schechner 05gmoccapy_1_0 5ccf94a 06linuxcnc 10debian/linuxcnc.files.in gmoccapy 1.0 - changed the debian/linuxcnc.files.in file to make buildbot happy * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5ccf94a
[21:15:22] <KGB-linuxcnc> 03Norbert Schechner 05master 5ccf94a 06linuxcnc fast forward * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5ccf94a
[21:24:54] -!- mozmck has quit [Ping timeout: 252 seconds]
[21:26:02] -!- toxx has quit [Ping timeout: 252 seconds]
[21:26:34] -!- Gamma_X has quit [Ping timeout: 252 seconds]
[21:26:35] -!- s1dev has quit [Ping timeout: 252 seconds]
[21:27:17] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[21:27:52] -!- gonzo___ has quit [Ping timeout: 252 seconds]
[21:28:46] -!- djinni` has quit [Ping timeout: 252 seconds]
[21:34:26] -!- maximilian_h has quit [Ping timeout: 264 seconds]
[21:35:34] -!- jerryitt has quit [Quit: Connection closed for inactivity]
[21:40:24] -!- PetefromTn has quit [Remote host closed the connection]
[21:40:43] -!- PetefromTn [PetefromTn!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[21:40:54] -!- lyzidiamond has quit [Quit: lyzidiamond]
[21:44:08] -!- i_tarzan_ has quit [Ping timeout: 244 seconds]
[21:50:50] -!- JT-Shop_ [JT-Shop_!~john@75.106.20.181] has joined #linuxcnc-devel
[21:53:11] -!- dnalerom_ [dnalerom_!~dnaleromj@64.20.30.66] has joined #linuxcnc-devel
[21:53:15] -!- Gamma-X has quit [Read error: Connection reset by peer]
[21:53:16] -!- JT-Shop has quit [Read error: Connection reset by peer]
[21:53:16] -!- djinni` has quit [Ping timeout: 240 seconds]
[21:53:16] -!- acdha has quit [Ping timeout: 240 seconds]
[21:53:16] -!- skorasaurus has quit [Read error: Connection reset by peer]
[21:53:17] -!- PCW has quit [Ping timeout: 240 seconds]
[21:53:17] -!- lyzidiamond has quit [Ping timeout: 240 seconds]
[21:53:17] -!- sudobangbang has quit [Ping timeout: 240 seconds]
[21:53:17] -!- mozmck has quit [Ping timeout: 240 seconds]
[21:53:17] -!- gonzo_nb has quit [Ping timeout: 240 seconds]
[21:53:17] -!- s1dev has quit [Ping timeout: 240 seconds]
[21:53:18] -!- crank_ has quit [Ping timeout: 240 seconds]
[21:53:18] -!- johtso has quit [Ping timeout: 240 seconds]
[21:53:19] -!- andypugh has quit [Ping timeout: 240 seconds]
[21:53:19] -!- dnaleromj has quit [Ping timeout: 240 seconds]
[21:53:19] -!- KimK has quit [Ping timeout: 240 seconds]
[21:53:19] -!- chillly has quit [Ping timeout: 240 seconds]
[21:53:28] PCW_ is now known as PCW
[21:53:41] thomasli_ is now known as thomaslindstr_m_
[21:54:01] -!- patrickarlt has quit [Ping timeout: 240 seconds]
[21:54:51] -!- toxx has quit [Ping timeout: 240 seconds]
[21:55:14] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[21:55:26] -!- sumpfralle has quit [Ping timeout: 264 seconds]
[21:57:11] -!- PetefromTn_ [PetefromTn_!~quassel@24-158-172-171.dhcp.jcsn.tn.charter.com] has joined #linuxcnc-devel
[22:00:32] -!- Deejay has quit [Quit: bye]
[22:02:02] -!- skorasaurus2 has quit [Ping timeout: 264 seconds]
[22:03:29] <linuxcnc-build> build #0 of deb-wheezy-sim-binary-armhf is complete: Failure [4failed apt-get-update shell_1] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-wheezy-sim-binary-armhf/builds/0
[22:05:10] <seb_kuzminsky> aw yea
[22:05:36] <seb_kuzminsky> so the first wheezy-armhf build passed, and it went on to try to build wheezy-armhf (posix) debs, and that failed
[22:05:46] <seb_kuzminsky> the next mole rears its head!
[22:05:49] <linuxcnc-build> build #45 of deb-precise-rtpreempt-binary-x86 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-x86/builds/45
[22:05:53] <linuxcnc-build> build #45 of deb-precise-rtpreempt-binary-amd64 is complete: Failure [4failed apt-get-update shell_2] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-rtpreempt-binary-amd64/builds/45
[22:06:52] -!- KimK [KimK!~Kim__@ip24-255-223-153.ks.ks.cox.net] has joined #linuxcnc-devel
[22:08:32] -!- thomaslindstr_m has quit [Ping timeout: 240 seconds]
[22:08:32] -!- mozmck has quit [*.net *.split]
[22:08:34] -!- chillly has quit [*.net *.split]
[22:08:34] -!- patricka_ has quit [*.net *.split]
[22:08:34] -!- thomaslindstr_m_ has quit [*.net *.split]
[22:08:34] -!- djinni` has quit [*.net *.split]
[22:08:34] -!- PetefromTn has quit [*.net *.split]
[22:08:34] -!- trufa has quit [*.net *.split]
[22:08:34] -!- bedah has quit [*.net *.split]
[22:08:34] -!- alusion has quit [*.net *.split]
[22:08:34] -!- GJdan has quit [*.net *.split]
[22:08:34] -!- FreezingCold has quit [*.net *.split]
[22:08:34] -!- Fox_Muldr has quit [*.net *.split]
[22:08:34] -!- dgarr has quit [*.net *.split]
[22:08:34] -!- Connor has quit [*.net *.split]
[22:08:34] -!- tinkerer has quit [*.net *.split]
[22:11:23] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[22:11:23] -!- tinkerer [tinkerer!~tinkerer@212.186.185.170] has joined #linuxcnc-devel
[22:11:46] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[22:12:01] -!- dgarr has quit [Ping timeout: 240 seconds]
[22:12:11] sudobangbang_ is now known as sudobangbang
[22:12:25] -!- chillly has quit [Ping timeout: 240 seconds]
[22:12:25] -!- tinkerer has quit [Ping timeout: 240 seconds]
[22:13:36] -!- jesseg has quit [Ping timeout: 265 seconds]
[22:14:22] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[22:15:43] -!- tinkerer [tinkerer!~tinkerer@mail.play-pla.net] has joined #linuxcnc-devel
[22:16:42] -!- ink has quit [Disconnected by services]
[22:17:19] <linuxcnc-build> Hey! build checkin #1826 is complete: Success [3build successful]
[22:17:19] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1826
[22:21:26] -!- PetefromTn_ has quit [Remote host closed the connection]
[22:24:47] -!- sfello has quit [Quit: sfello]
[22:27:31] -!- sfello has quit [Client Quit]
[22:32:12] <linuxcnc-build> build #46 of deb-precise-xenomai-binary-amd64 is complete: Failure [4failed apt-get-update shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-precise-xenomai-binary-amd64/builds/46
[22:37:51] -!- andypugh [andypugh!~andy2@cpc14-basl11-2-0-cust436.20-1.cable.virginm.net] has joined #linuxcnc-devel
[22:38:08] -!- tinkerer has quit [Ping timeout: 240 seconds]
[22:38:08] -!- dgarr has quit [Ping timeout: 240 seconds]
[22:38:12] -!- Connor has quit [Ping timeout: 240 seconds]
[22:38:14] Connor1 is now known as Connor
[22:38:24] -!- tinkerer [tinkerer!~tinkerer@mail.play-pla.net] has joined #linuxcnc-devel
[22:40:38] -!- amiri has quit [Read error: Connection reset by peer]
[22:42:58] -!- dgarr [dgarr!~dgarrett@71-223-146-186.phnx.qwest.net] has joined #linuxcnc-devel
[22:46:16] -!- GJdan has quit [Ping timeout: 240 seconds]
[22:46:17] -!- mozmck has quit [Ping timeout: 240 seconds]
[22:46:26] -!- skorasaurus2 has quit [Ping timeout: 264 seconds]
[22:46:50] -!- sfello has quit [Quit: sfello]
[22:48:03] -!- PetefromTn_ has quit [Quit: Why is the alphabet in that order? Is it because of that song?]
[22:48:35] -!- PetefromTn has quit [Client Quit]
[22:48:58] -!- patrickarlt has quit [Remote host closed the connection]
[22:51:43] -!- ve7it [ve7it!~LawrenceG@S01060014d19d0b68.pk.shawcable.net] has joined #linuxcnc-devel
[22:52:05] -!- mozmck [mozmck!~moses@67.210.159.209] has joined #linuxcnc-devel
[22:53:02] -!- krusty_ar has quit [Ping timeout: 264 seconds]
[23:03:16] -!- chillly has quit [Quit: Leaving]
[23:03:44] -!- dnalerom_ has quit [Quit: Dang. Where did dnaleromj's computer go?]
[23:06:50] -!- micges [micges!~captain_p@daw144.neoplus.adsl.tpnet.pl] has joined #linuxcnc-devel
[23:11:26] <linuxcnc-build> build #1415 of deb-lucid-rt-binary-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/deb-lucid-rt-binary-i386/builds/1415
[23:13:34] PetefromTn is now known as PetefromTn[A]
[23:15:20] PetefromTn[A] is now known as PetefromTn
[23:23:21] -!- PetefromTn_ has quit [Client Quit]
[23:26:03] -!- calvinmetcalf has quit [Quit: Connection closed for inactivity]
[23:34:03] -!- kb8wmc has quit [Quit: ChatZilla 0.9.90.1 [Firefox 20.0/20130329043827]]
[23:40:22] -!- bedah has quit [Remote host closed the connection]
[23:43:16] -!- larryone has quit [Ping timeout: 240 seconds]
[23:43:16] -!- ve7it has quit [Ping timeout: 240 seconds]
[23:43:21] -!- larryone has quit [Remote host closed the connection]
[23:43:26] -!- dnaleromj [dnaleromj!~dnaleromj@98.124.126.110] has joined #linuxcnc-devel
[23:49:52] -!- larryone has quit [Quit: Leaving]
