Back
[09:49:48] <micges> good morning
[09:54:03] <alex_joni> hello
[09:55:22] <micges> alex_joni: I modified CHANGE_TOOL canon call to my rack toolchanger and everything works fine
[09:56:05] <alex_joni> micges: sounds good
[09:56:48] <micges> but one issue I have: when I send two TRAVERSE then emc move to second programmed point
[10:03:15] <micges> not along with first programmed point
[10:10:32] <alex_joni> maybe somehow it doesn't update the current position
[10:10:40] <alex_joni> in interpreter at the end of CHANGE_TOOL]
[10:24:46] <micges> ok Ifound it
[10:25:24] <micges> (canonUpdateEndPoint must be used)
[10:33:45] <alex_joni> that's the one
[11:01:34] <alex_joni> hmm.. hardy kernel boots on this 8.10 install
[11:02:24] <alex_joni> latency test runs, I get overruns (probably because of SMI)
[12:07:15] <CIA-2> EMC: 03bigjohnt 07TRUNK * 10emc2/docs/ (README TODO): update todo and add info on headers to readme
[12:30:23] <alex_joni> morning BigJohnT
[12:31:57] <BigJohnT> morning alex_joni
[12:32:32] <BigJohnT> looks like if you pick an image that is not in the same directory or a subdirectory then the local path gets tacked on :(
[12:34:59] <BigJohnT> alex_joni: did you get the getting started guide added to the 2.3 html page or does it matter?
[12:39:37] <alex_joni> I didn't look
[12:40:06] <alex_joni> http://www.linuxcnc.org/docview/devel/html/ here you mean?
[12:41:29] <BigJohnT> no here
http://www.linuxcnc.org/docs/devel/ but I see it automagiclly has appeared
[12:45:12] <alex_joni> I added that a while ago
[12:45:22] <alex_joni> btw.. try to use docview/ instead of docs/
[12:45:36] <alex_joni> it outputs basicly the same stuff, but docview/ retains the rest of the site
[12:45:53] <alex_joni> http://www.linuxcnc.org/docview/devel/
[12:45:53] <BigJohnT> hmmm that is the link on the documents page
[12:46:16] <alex_joni> I'll fix it
[12:46:21] <BigJohnT> ok
[12:47:56] <alex_joni> done
[12:48:18] <BigJohnT> your quick :)
[12:48:39] <alex_joni> actually my connection is dead slow now
[12:49:32] <BigJohnT> I bet it is faster than my 49.2Kbps
[12:49:44] <BigJohnT> hi francis
[12:49:53] <francis> hello John
[12:50:00] <francis> ho are you today ?
[12:50:08] <BigJohnT> I see you fixed my foul up... thanks
[12:50:21] <francis> :)
[12:50:41] <BigJohnT> I'm doing better... I fell on the ice the other day so I'm moving real slow :)
[12:51:00] <francis> I read for your back !
[12:51:45] <micges> alex_joni: can you look at this:
http://www.pastebin.ca/1331548 (not pasting full diff becouse tab/spaces issue, will rewrite later)
[12:52:15] <micges> (it is not flexible yet but its working)
[12:52:42] <CIA-2> EMC: 03bigjohnt 07TRUNK * 10emc2/docs/README: add info on images and directories
[12:52:43] <francis> francis is now known as tissf
[12:53:55] <micges> this is better:
http://www.pastebin.ca/1331551
[12:54:01] <tissf> I still have a problem for compile the docs on two pc Hardy
[12:54:14] <BigJohnT> hows that?
[12:54:28] <BigJohnT> did you do a make clean?
[12:54:38] <tissf> yes clean
[12:55:07] <tissf> an minute
[12:56:46] <tissf> Building ../docs/src/Master_User.pdf
[12:56:48] <tissf> make: *** [../docs/src/Master_User.pdf] Erreur 1
[12:56:50] <tissf> francis@aldi2:~/emc2-trunk/src$
[12:57:47] <tissf> not a recent problem... one month
[12:58:45] <tissf> about
[12:58:49] <BigJohnT> hmmm, I have had to do a fresh download before to clear up an unknown error that I most likely did
[13:00:46] <BigJohnT> hmm, I have required image file /common/axis.png does not exist on my hardy machine... how did I do that?
[13:01:21] <tissf> ahah
[13:01:52] <BigJohnT> you find something tissf ?
[13:02:45] <tissf> Another pain, I can't compile edit .lyx here ! I have to reboote for dapper... edit and reboot under hardy for testing !
[13:03:11] <tissf> bbl
[13:03:16] <BigJohnT> ok
[13:06:26] <tissf> ok
[13:06:33] <BigJohnT> you fix it tissf
[13:06:53] <tissf> no just booted dapper
[13:07:45] <BigJohnT> ok, I had to do a make clean and it bailed then I ran make on my hardy machine... looks like it didn't update an html file so it was looking for an image that I moved
[13:15:33] <CIA-2> EMC: 03bigjohnt 07TRUNK * 10emc2/docs/src/install/images/latency.png: update image to 2.3
[13:16:31] <tissf> John can you look at /common/User_Concepts.lyx section 1.2 sub-section 1.2.1 ?
[13:16:50] <BigJohnT> ok
[13:18:44] <BigJohnT> what am I looking for?
[13:18:55] <BigJohnT> is it the reference?
[13:18:59] <tissf> the link
[13:19:05] <BigJohnT> ok
[13:19:14] <tissf> it is correct ?
[13:20:00] <BigJohnT> it seems to be correct...
[13:20:30] <BigJohnT> it links to /common/machining_center.lyx
[13:21:14] <tissf> not here ! no target
[13:21:41] <tissf> strange
[13:22:01] <BigJohnT> open up master_user then open up the other two from master_user
[13:22:18] <BigJohnT> then you should be able to select the link
[13:22:21] <tissf> ah ok
[13:22:39] <tissf> my bad
[13:24:32] <BigJohnT> I don't see the /common/machining_center.lyx in the master_user_fr.lyx that would be the problem
[13:25:06] <tissf> I dont have
[13:25:43] <BigJohnT> I have it as the first chapter in the Using EMC part
[13:25:52] <tissf> I did not cut this party
[13:26:05] <tissf> part
[13:26:51] <BigJohnT> I most likely moved it around on you and you missed it :)
[13:27:22] <tissf> not exactly
[13:28:48] <tissf> First I moved this part too but somme links were dead
[13:29:28] <BigJohnT> well, I must get started for work...
[13:29:46] <BigJohnT> yea, if it is not part of the same master then the link breaks :(
[13:30:22] <BigJohnT> good talking to you tissf
[13:30:51] <BigJohnT> * BigJohnT must to work now
[13:31:02] <BigJohnT> head to work now
[13:31:14] <tissf> thank you John you made a big work with this doc
[13:31:29] <BigJohnT> ok talk to you later
[13:31:31] <tissf> latter I have to found this error
[14:15:32] <tissf> please, someone can compile the trunk with --enable-build-documentation under hardy and to say if is without error?
[14:32:14] <jepler> tissf: works here
[14:32:32] <jepler> (I can't look at the files since it's a remote machine, but "make docs" finishes without errors)
[14:33:10] <tissf> hi and thanks jepler
[14:34:47] <jepler> hi tissf and thank you for your continuing work on emc2!
[14:35:06] <tissf> jepler are you under hardy ?
[14:35:23] <jepler> yes.
[14:35:41] <tissf> :(
[14:40:34] <jepler> do you have any modified or conflicted files in docs? (they show up as "M" or "C" when you "cvs up")
[14:40:56] <jepler> do you use the "-d" flag when you "cvs up", so that you get newly created directories?
[14:56:14] <tissf> I made a fresh cvs
[14:56:33] <tissf> jepler yes cvs up -Pd
[14:57:00] <tissf> diff -u and cvs -z5 -q
[15:03:36] <tissf> nop same error after a fresh cvs :(
[15:04:00] <BigJohnT> :(
[15:06:02] <tissf> I'm stuck
[15:06:07] <jepler> I think you'll have to look inside lyx debug output. I just wrote about it on the wiki:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?BeyondWiki#Troubleshooting_LyX_errors
[15:07:29] <BigJohnT> so that is how you find out what I screwed up so fast jepler :)
[15:10:48] <tissf> what is your Lyx version in hardy?
[15:11:03] <jepler> ii lyx 1.5.3-1 Document Processor
[15:13:31] <tissf> for unknow reason I have 1.6.1
[15:14:14] <BigJohnT> seems like I have 1.5.x but I can't verify it from here
[15:14:15] <jepler> 1.6.1 is in hardy-backports
[15:14:22] <jepler> I have not enabled hardy-backports
[15:15:17] <tissf> argh !
[15:15:55] <BigJohnT> what is a hardy-backport?
[15:16:19] <jepler> BigJohnT: newer versions of programs or libraries than were originally included in hardy
[15:16:47] <BigJohnT> ok
[15:16:48] <BigJohnT> thanks
[15:20:06] <tissf> ok return with 1.5.3-1 solved the problem ! many thanks :)
[15:20:15] <jepler> good
[15:20:32] <jepler> someday somebody will have to figure out why it doesn't work with 1.6.1.
[15:21:02] <jepler> probably in about march 2010 I'll get around to it
[15:21:10] <tissf> :)
[15:23:21] <tissf> jepler I don't have enabled hardy-backport or hardy-proposed ! mystery !
[15:23:40] <jepler> indeed!
[15:25:00] <tissf> or my memory fails! ;)
[18:11:50] <tissf> weather provides a wind speed of 74mph that night! I hope the roof will keep!
[21:20:05] <tomaw> [Global Notice] Hi all. One of our client (leaf) server sponsors is having network connectivity problems. We've removed the server from the DNS rotation until the issue is resolved. Sorry for the disruption and thanks for using freenode!
[21:59:53] <CIA-2> EMC: 03cradek 07TRUNK * 10emc2/src/emc/rs274ngc/interp_queue.cc:
[21:59:53] <CIA-2> EMC: fix silly bug that caused incorrect gouging errors when the compensated path had some rapids. (thanks BJT).
[21:59:53] <CIA-2> EMC: also, add some debug output that might eventually get hooked to one of those bits in the ini file.
[23:47:26] <invite|MkS> night