The Point n Click Configurator covers Mesa cards and parallel port stepper configurations. If you have a simple parallel port stepper machine the StepConf Wizard might be a better choice. The Point n Click Configurator can generate some advanced configurations without knowing anything about HAL.
Start the PnCConf program from the CNC menu or from a terminal
window with `pncconf`. For more information on the terminal
window see the Linux FAQ section.
PnCConf Splash
. image::images/pncconf-splash.png[]
== Basic Machine Information
[{Machine Name:}] What you want to call your machine and must not
have any spaces.
PnCConf Basic
.
image::images/pncconf-basic.png[]Here you can select from different GUI’s and options for each one.
GUI Configuration
. image::images/pncconf-gui.png[]
== Mesa Configuration
Mesa Configuration
.
image::images/pncconf-mesa-config.png[]
== Mesa I/O Setup
Mesa I/O C2
.
image::images/pncconf-mesa-io2.png[]
Mesa I/O C3
image::images/pncconf-mesa-io3.png[]
Mesa I/O C4
.
image::images/pncconf-mesa-io4.png[]Axis Drive Configuration
Axis Configuration
== Advanced Options Advanced Options image::images/pncconf-advanced.png[]